Main Forums >> Guitar Technology
        Print Thread

Pages: 1
Huge Longjohns
long-serving member


Joined: 10/04/03
Posts: 1913
Loc: Where the black rocks stand gu...
Is this correct about Fender using Nitro over thick poly?
      #1030824 - 28/01/13 12:26 PM
Stumbled across this webpage claiming that all the stuff about old Fenders having thin nitro cellulose coats of paint is just a marketing scam as they'd been using thick poly underneath since 63. Is this correct?

Secret Fender Lacquer Process

--------------------
"Whenever you find yourself on the side of the majority it is time to pause and reflect" Mark Twain


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
fletcher



Joined: 01/05/05
Posts: 1219
Loc: london
Re: Is this correct about Fender using Nitro over thick poly? new [Re: Huge Longjohns]
      #1030832 - 28/01/13 12:51 PM
if it's true who says it's a bad thing? Maybe it's the reason Fenders work

Seriously though, a lump of wood "breathing" may not be such a good idea, cracks, warps, size changing due to the weather etc. would I'm sure cause more problems. Surely having it sealed would be a benefit?

Slightly off topic, having recently seen how poor a finish there was on a Gibson Les Paul Junior I think I would prefer the Fender method he describes. £600 my student paid, what a terrible guitar. It just seems like any cheap guitar for a 1/4 of the price. The finish is wafer thin and is coming off already (couple of months), plays poor to average but the worst is yet to come. His strap came off and it dropped and a fret fell out. Fell out.......!!

Sorry I know it's not the issue of this thread, but what I'm saying is if they cut the manufacturing costs with the finish, well if that means more time is spent on the guitar itself maybe it's for the best.


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
zenguitarModerator
active member


Joined: 05/12/02
Posts: 8704
Loc: Devon
Re: Is this correct about Fender using Nitro over thick poly? new [Re: Huge Longjohns]
      #1030840 - 28/01/13 01:20 PM
Fits in with what I've always known, and it's never been much of a secret either. A rather sensationalist telling of the tale, creating some nasty conspiracy theory where there is none, and dark mutterings. Certainly not a marketing scam. Where nitro is used, it's there for a reason, and the sealer coats and base coats have been common knowledge since they first started.

Finishing wood evolved precisely to stabilise it and protect it from changes in humidity. Once that was established it then expanded to include finishing for appearance. The problem these days is that more attention is focused on the secondary purpose than the primary one, as in so many things.

Andy

--------------------
When the going gets weird, the Weird turn Pro.


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
zenguitarModerator
active member


Joined: 05/12/02
Posts: 8704
Loc: Devon
Re: Is this correct about Fender using Nitro over thick poly? new [Re: fletcher]
      #1030842 - 28/01/13 01:31 PM
Was that Les Paul Jr bought new Fletcher? If so, back to the shop it should go.

Nothing wrong with a thin finish, that's a good thing. But it really should stay attached to the guitar

I'm less concerned with a fret falling out believe it or not. It could be a sign of poor workmanship/quality control but could equally be that the fretboard has dried out way too much and the shrinkage has opened the fret slots. If so, a period of re-humidification and then conditioning the fretboard with lemon oil or similar will make it as good as new.

I see a lot of guitars that left the factory in good order, but by the time they go through shipping in containers, distributors and dealers warehouses, they show very dry fretboards. A few months in a centrally heated house on top of that can be asking too much of a poor, defenceless, piece of wood.

Andy

--------------------
When the going gets weird, the Weird turn Pro.


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
Goddard



Joined: 04/04/12
Posts: 947
Re: Is this correct about Fender using Nitro over thick poly? new [Re: zenguitar]
      #1030846 - 28/01/13 01:42 PM
Alas, IME Fender still haven't worked out a finish to prevent "fret sprout" very well, especially on their maple neck + fingerboard models. Perhaps if they just seasoned the wood better/longer...


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
Random Guitarist



Joined: 01/04/08
Posts: 552
Loc: West Sussex UK
Re: Is this correct about Fender using Nitro over thick poly? new [Re: zenguitar]
      #1030849 - 28/01/13 01:50 PM
Quote zenguitar:


Nothing wrong with a thin finish, that's a good thing. But it really should stay attached to the guitar





Seems like Gibson don't always agree, for the 60s/70s tribute series LP Studio guitars with a dark finish on the back the thin flakey finish seems to be part of the deal. I know a couple of paople with these and the finish flakes off really easily. The things seem to be designed to distress easily, there must be a market for this I guess. Some people want their guitar to look all beaten up and 'bad-ass' without taking the time to do it themselves.

The first run of 50's tributes on the other hand seem to have the finish stuck on quite well.

Regards,

Grant.

--------------------
I've never liked a solo violin, you need at least five for a proper fire.


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
fletcher



Joined: 01/05/05
Posts: 1219
Loc: london
Re: Is this correct about Fender using Nitro over thick poly? new [Re: zenguitar]
      #1030895 - 28/01/13 06:29 PM
thanks Zen I will pass on what you said. I had told him to take it back. I saw it saturday after they "fixed it" . The fret is now raised so he gets fret buzz on all the frets lowerr than it, all strings, and it sticks out at the top side of the neck (by which I mean it's not been fitted in the centre - clear as mud - I mean it sticks out about half a mil on one side of the neck). I told him it was a bodge job but he can't face them anymore, he wants to get it set-up by someone else. Up to him I guess. For what it's worth my Westbury Standard is a much better guitar, which is in the Les Paul mold.

thanks Rhino as well, sorry again for the slight hi-jack of the thread.


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
Random Guitarist



Joined: 01/04/08
Posts: 552
Loc: West Sussex UK
Re: Is this correct about Fender using Nitro over thick poly? new [Re: fletcher]
      #1030939 - 28/01/13 10:24 PM
I wish he could bring himself to face them again, this kind of c**p needs to be held to account.
His guitar has the capacity to be a good instrument and they've messed it up in what sounds like a completely inexcuseable way. So now he has to pay for someone else to sort it out. Get in touch with Gibson, name and shame the store if they won't actually make it right. In this instance making it right probably means paying the bill for a repairer of your choice to fix it, they've clearly displayed their own incompetence.

But if he can't, he can't.

Regards,

Grant.

(I may be overreacting. This stuff really annoys me, I just had to fix a 'luthier' set up of a nut where the g string slot was cut half a milimetre lower then the radius of the rest of the strings, resulting in a buzzy unuseable guitar.)

--------------------
I've never liked a solo violin, you need at least five for a proper fire.


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
Dynamic Mike



Joined: 31/12/06
Posts: 1974
Re: Is this correct about Fender using Nitro over thick poly? new [Re: Huge Longjohns]
      #1030947 - 29/01/13 12:18 AM
I did the Gibson factory tour in Memphis (where they make the hollow body/semi models) last year. I was quite surprised at what a small low-tech operation it was. Essentially there's pretty much one bloke/woman who specialises in each job & if they're off, there's someone else available who can have a good go. The only CAD-CAM type process is the fret dressing, which they estimate is accurate to 2 human hair widths more than the bloke it replaced!

Overall, it's definitely closer to Project Ukulele than it is to NASA.

Personally I think if anyone thinks they can 'hear' the paint finish on a solid body electric guitar, they have bigger issues to address!

--------------------
Disclaimer: The views or opinions expressed above do not necessarily reflect those of the poster by the time you read this.


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
fletcher



Joined: 01/05/05
Posts: 1219
Loc: london
Re: Is this correct about Fender using Nitro over thick poly? new [Re: Random Guitarist]
      #1030948 - 29/01/13 12:25 AM
I agree with you. He's a young lad 17, maybe 18, I forget. Lacks a bit of confidence. I did tell him to go back, but I think he finds the confrontation difficult. They sort of played it as, "well you dropped it, and we fixed it for free" line. But you and I know we could take most guitar necks and smash them onto the floor all day, without a fret falling out. Pity because he was really happy to get that guitar. I will talk to him again next time I see him.

If I had the skills I would do it for him, but I'm afraid I don't.


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
mick.n



Joined: 01/09/04
Posts: 570
Loc: It's grim up north.
Re: Is this correct about Fender using Nitro over thick poly? new [Re: Dynamic Mike]
      #1031023 - 29/01/13 01:51 PM
Quote Dynamic Mike:

I did the Gibson factory tour in Memphis (where they make the hollow body/semi models) last year. I was quite surprised at what a small low-tech operation it was. Essentially there's pretty much one bloke/woman who specialises in each job & if they're off, there's someone else available who can have a good go. The only CAD-CAM type process is the fret dressing, which they estimate is accurate to 2 human hair widths more than the bloke it replaced!

Overall, it's definitely closer to Project Ukulele than it is to NASA.

Personally I think if anyone thinks they can 'hear' the paint finish on a solid body electric guitar, they have bigger issues to address!




I saw on the telly a few months ago, on the "How it's made" program, a Gibson Les Paul being made from the wood selection process to the final testing.

It did indeed seem quite low tech as you mentioned.


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
Huge Longjohns
long-serving member


Joined: 10/04/03
Posts: 1913
Loc: Where the black rocks stand gu...
Re: Is this correct about Fender using Nitro over thick poly? new [Re: Huge Longjohns]
      #1031078 - 29/01/13 07:50 PM
Quote:

Personally I think if anyone thinks they can 'hear' the paint finish on a solid body electric guitar, they have bigger issues to address!




Absolutely agree, which is why I posted this thread--quite amusing to think that all these people swearing that this finish sounds better (whatever THAT means!) than another might have been talking through their hat all the time!

--------------------
"Whenever you find yourself on the side of the majority it is time to pause and reflect" Mark Twain


Post Extras: Print Post   Remind Me!   Notify Moderator     Back to top
Pages: 1

Rate this thread

Jump to

Extra Information
0 registered and 8 anonymous users are browsing this forum.

Moderator:  David Etheridge, James Perrett, zenguitar, Martin Walker, Forum Admin, Hugh Robjohns, Zukan, Frank Eleveld, SOS News Editor,  
Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled
Rating: *****
Thread views: 2985

August 2014
On sale now at main newsagents and bookstores (or buy direct from the
SOS Web Shop)
SOS current Print Magazine: click here for FULL Contents list
Click image for August 2014
DAW Tips from SOS

 

Home | Search | News | Current Issue | Tablet Mag | Articles | Forum | Subscribe | Shop | Readers Ads

Advertise | Information | Privacy Policy | Support | Login Help

 

Email: Contact SOS

Telephone: +44 (0)1954 789888

Fax: +44 (0)1954 789895

Registered Office: Media House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom.

Sound On Sound Ltd is registered in England and Wales.

Company number: 3015516 VAT number: GB 638 5307 26

         

All contents copyright © SOS Publications Group and/or its licensors, 1985-2014. All rights reserved.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.

Web site designed & maintained by PB Associates | SOS | Relative Media