sorry in advance if this is a silly question.
i have invested in a omni
studio,upgrading from an audiophile,which i ran in conjuction with a studiomaster 10
channel mixing desk.
i used the aux sends from the desk to the inputs of my card,and
the outs of my card to the stereo 7/8 ins of my desk.
this was fine allowing me to
record ,but also practise with a friend using the desk to plug ,vocal,guitar,bass etc
into,and monitor through pa speakers (simple a/b switch) arrangement,without opening
when monitoring with cubase i again switched the a/b to my other monitors
bm5's and this worked pretty well.
but as the omni studio is, i guess a mixing
desk in itself
now when i jam with my friend ,if i for example connect an xlr into
the omni and a standard mike into the desk,i have to open cubase sx record enable a track
,click the monitor button ,before i hear anything back through the speakers.
suppose this is no big deal really ,just seems a little strange.
as i am really
baffled at the moment,due to the ammount of different configurations that the omni will
allow ,should i just abort using my mixing desk altogether ,and just connect the omni
direct outs to my power amp and speakers.
when i do want to jam ,just re-arrange the