Michael B
active member
Joined: 28/08/03
Posts: 2076
|
has anybody managed to make use of the SX3 arpeggiators?
#471320 - 10/06/07 05:02 PM
|
|
|
|
I believe you can pipe the output to a midi channel by holding down a chord in say a 4 bar
loop selecting 'merge midi in loop' and then the chord itself is overwritten and the
arpeggio notes appear instead. But it just will not do it for me.
Also. I'll
run the loop a few times, stop SX3 rolling, then press play again and the arpeggio is
played several octaves higher.
I have had a look in the manual and that's n
help at all. ONce I can get some control over the arpeggiator I can sell my supernova, all
i use it for is generating arpeggios and even that won't sync up to SX3 for some reason
that is beyond me, my other synths sync up no problem
|
NoMarky
Joined: 18/03/05
Posts: 127
|
Re: has anybody managed to make use of the SX3 arpeggiators?
[Re: Michael B]
#471387 - 10/06/07 08:50 PM
|
|
|
|
Record your chord to a MIDI part. Place the left and right locators around the MIDI part,
P is the default shortcut for doing that (Set locators to selection).
Go to
the MIDI menu, select merge MIDI in loop. An options box pops up with options to include
sends and inserts, and to erase the original part. Select the options as you want them
(you will want to include the insert, as that is where the arpeggiator is) and hit ok.
The arpeggiated notes are now placed into your MIDI part. Sorry if the actual
terms are incorrect, but I don't have Cubase installed on this puter.
As to why
the pitch is higher when you restart, is it possible you have some pitch change lingering
over from the bar before? Just a thought...
--------------------
If it ain't broke, try a hammer
|
Michael B
active member
Joined: 28/08/03
Posts: 2076
|
Re: has anybody managed to make use of the SX3 arpeggiators?
[Re: Michael B]
#471429 - 10/06/07 11:13 PM
|
|
|
|
Thanks for that, but that's what I'd already done, and it steadfastly refuses to do it.
Just to cover every possibly eventuality
chord recorded in the midi
part on channel, so I have a sustained chord over the length of say 2 bars.
left and right locators set around those two bars.
have already opened the
insert for arpache (am i missing somehitng at this point may be, o I have to have the
arpegiattor 'running' eg notes coming out)
Go to merge midi in looop with the
options you suggest
then what do i do, press paly? hold down the notes on the
keyboard (altyhough i see no need for that as the chord is already there between the left
and right locators)
when I press play, the arpegiatted notes are played but in
the part itself the sustained chord remiains, even though i had selected 'include inserts
and erase desitnation'
at what point are the notes supposed to over write the
sustained chord?
|
Michael B
active member
Joined: 28/08/03
Posts: 2076
|
Re: has anybody managed to make use of the SX3 arpeggiators?
[Re: Michael B]
#471432 - 10/06/07 11:17 PM
|
|
|
|
NotMarky,
Thanks, it's done it now! I think what i might have missed is
selecting one of the preset patterns in the arp
|
NoMarky
Joined: 18/03/05
Posts: 127
|
Re: has anybody managed to make use of the SX3 arpeggiators?
[Re: Michael B]
#471525 - 11/06/07 10:12 AM
|
|
|
|
Cool, glad you got it sorted
--------------------
If it ain't broke, try a hammer
|
Previous
Topics
Next
Threaded
Edit
Reply
Quote
