N.B. Updated 08/05/2009 to add warning about WD40 & Isopropyl
N.B. Updated 20/08/2014 to
further clarify the difference between DeoxIT D5 and DeoxIT F5 Faderlube (formerly CaiLube
It's amazing just how many forum posts
complaining about audio interface pops and crackles or PC 'interference' problems turn out
to be simply due to dirty contacts or components. Personally I use Caig's DeoxIT D5 spray
) to deal with
such problems, and to prevent them from happening in the first place.
It has a
good reputation in the audio industry, being widely recommended by manufacturers of mixing
and DJ desks, guitar, hi-fi, and power amps, and rack effects (even on elderly boutique
audio gear), and is good for cleaning:
· Plugs & Sockets.
· Rotary pots and faders.
· Contacts on computer expansion
The reason for this reputation is that many generic contact cleaners
simply use solvents to remove surface contamination, but DeoxIT not only removes this
muck, but also leaves a thin layer of lubricant behind that improves conductivity and
helps to prevent further contamination/oxidation much better than many other 'contact
cleaners'. Basically, if you've got crackly pots or faders, a quick squirt of a generic
contact cleaner generally makes things better for a few days, but then the noises come
back, while with DeoxIT the effects generally last for months or even years!
Zap Those Crackles!
For preventative maintenance, I go round
my studio about once a year and pull out each audio plug in turn and give it a wipe with a
cloth on which I've sprayed a little DeoxIT D5. If you plug/unplug it a few times this
will also get a little DeoxIT D5 into the socket as well. Don't forget your mains
connections, since these can sometimes get very tarnished over the years. I pull out the
fuses in the mains plugs and give their ends a wipe, and also make sure the pins on my
mains plugs are really clean, since this will help prevent intermittent connections and
make sure your gear gets a good earth connection, which in turn can lower your noise
With crackly pots and faders, apply a quick spray of DeoxIT D5 and
move them back and forth a dozen or so times to help break up any dirt and to distribute
the lubrication. Leave overnight and then listen again - if any crackles remain try
repeating the process, although in a few cases you may have to replace the pot/fader due
to excessive wear. The DeoxIT D5 5% formula has a carrier solvent that helps flush the
muck away, but then quickly evaporates, leaving the lubricant in place to carry on doing
By the way, don't be tempted to try a squirt of
WD40 - 'WD' stands for 'Water Displacement', so while it's a great way to resolve problems
with rust, corrosion, or squeaks, and even removing chewing gum from carpets, it's not the
most appropriate product for fader crackles.
Similarly, Isopropyl Alcohol
will strip any lubrication from faders, leaving them clean but with a dry and scratchy
action rather than the smooth silky one you're expecting, which is likely to get
significantly worse fairly quickly.
Fader For Spills
Caig's DeoxIT F5 Fader is a more specialist product,
described as a 'moving contact lubricant'. On their web site, Caig state that DeoxIT D5
and DeoxIT Gold are both formulated for conductive metal surfaces, while DeoxIT Fader is
formulated to lubricate and enhance signal transmission on conductive plastics and
In essence, D5 removes
oxidation/tarnish on metal surfaces, improves conductivity, preserves and lubricates, as
well as helping reduce radio frequency interference, while F5 won't deal with
oxidation/tarnish, but instead lubricates faders, switches and pots with sliding surfaces
and reduces future wear/abrasion.
In practice, Caig recommend DeoxIT D5 as a
routine alternative treatment for faders (so if you only buy one Caig product this is
probably the one to go for), but DeoxIT F5 is preferred when your pots/faders have a heavy
contamination of dust or other dirt, if you've spilt beer or coke on your mixing desk, or
for use on heavy-duty moving components in DJ and other mixing desks when the original
lubrication has been worn away through extensive use or over-enthusiastic cleaning. Rane
only recommend DeoxIT F5 Fader for use on any of their pots and faders ( Detailed Slide Pot Care Procedure
). You use it in much the same way as the standard DeOxit D5 (spray and then move the
pot/fader back and forth a few times over its full travel to distribute the
Caig also sell DeoxIT Gold for those who have
lots of gold-plated plugs and sockets. This provides extended protection for indoor use
that you can wipe on after you've removed any muck using the basic DeOxIT D5 spray, or can
be used directly onto plated connectors that are already clean. There's lots more
information on their web site, and you can download a useful PDF file containing further
Caig products are widely available in the US and elsewhere around the world, and
in the UK can be found on-line at Russ Andrews ( www.russandrews.com
or in eBay e.g. http://stores.ebay.co.uk/CableStopOnline/Accessories-/_i.htm...
Ban those studio crackles for ever!