dadking
Joined: 10/08/10
Posts: 35
|
Dead Tascam DM24 repair or break up for parts
#995843 - 02/07/12 11:34 PM
|
|
|
|
As the title says my Dm24 has died showing error 0000009-01 and 0000004, I have been in
touch with Tascam who say it needs to be returned, but its just not viable cost wise to
send it back.
Is there anyone who knows these error codes and can give me some
insight to the problem, if not then sadly I will break it for spares.
|
ef37a
Joined: 29/05/06
Posts: 5624
Loc: northampton uk
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: dadking]
#995861 - 03/07/12 06:02 AM
|
|
|
Quote dadking:
As the title says
my Dm24 has died showing error 0000009-01 and 0000004, I have been in touch with Tascam
who say it needs to be returned, but its just not viable cost wise to send it back.
Is there anyone who knows these error codes and can give me some insight to the problem,
if not then sadly I will break it for spares.
I presume Tascam will not tell you what the codes mean? If that
is the case I dare say we all know who you will NOT be getting equipment from in the
future!
Dave.
|
BJG145
Joined: 06/08/05
Posts: 2156
Loc: Norwich UK
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: dadking]
#995876 - 03/07/12 07:55 AM
|
|
|
Google finds a few people reporting that dodgy capacitors are a common problem with this
unit...
Quote:
This
mixer is plagued by bad caps in the powersupply. Open the desk. Find the powersupply and
change the caps...big black round capacitors. If the silver heads are a bit round they are
failing. They should be dead on flat.
Might be worth a look anyway.
http://diato.org/sonotrad//DM24_condos.pdf
|
dadking
Joined: 10/08/10
Posts: 35
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: dadking]
#995887 - 03/07/12 08:52 AM
|
|
|
|
Thanks for the replies
Actually I just got a yamaha to replace the DM24 so not to
worried about it.
Tascam are keeping quiet on the error codes so no luck there.
I took a gamble when I purchased the unit second hand and bought as seen for 40 pounds.
I did do a google search but found nothing on capacitors although I will have a closer
look, all I could find was that the screens are prone to go and i do have a few lines
across the screen.
It is booting up Ok and the faders do perform there calibration
although one or two are a bit sluggish, it then comes up with the error code and thats it,
locked.
thanks guys
|
dadking
Joined: 10/08/10
Posts: 35
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: dadking]
#995890 - 03/07/12 08:57 AM
|
|
|
|
I just noticed your link will definately take a look
cheers
|
OneWorld
Joined: 07/04/09
Posts: 1566
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: dadking]
#995904 - 03/07/12 10:32 AM
|
|
|
|
I have the service manual on PDF for the DM24, I couldn't find anything on that code
though. If you do break it for spares I'd be interested in the main PCB - I dropped an FX
unit on my DM - amazingly everything still works except one of the LEDS on channel 6 -
DOH!
|
dadking
Joined: 10/08/10
Posts: 35
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: dadking]
#995930 - 03/07/12 11:50 AM
|
|
|
|
Ouch
A copy of the service manual would be appreciated. If i break it up I will
let you know
Cheers
|
Mora___di
Joined: 27/01/05
Posts: 82
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: dadking]
#996692 - 07/07/12 10:52 PM
|
|
|
|
The tascamforums.com had a lot of info and repair info regarding the dm24, but seems like
they are gone.
Regarding capacitors there are a couple of caps on the
powersupply that commonly fail. I changed them myself a few months ago.
I have
a pdf guide from tascam on changing the supply capacitors but dont think I can add an
attachement here. I also believe I had the service manual but I can't find it, maybe I
just looked at it at the tascamforums.
|
Mora___di
Joined: 27/01/05
Posts: 82
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: Mora___di]
#996693 - 07/07/12 10:53 PM
|
|
|
|
Ops, I see a previous poster already linked the capacitor pdf
|
OneWorld
Joined: 07/04/09
Posts: 1566
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: dadking]
#996714 - 08/07/12 08:40 AM
|
|
|
Quote dadking:
Ouch
A
copy of the service manual would be appreciated. If i break it up I will let you know
Cheers
PM'd you with copy
of service manual attached
|
Mora___di
Joined: 27/01/05
Posts: 82
|
Re: Dead Tascam DM24 repair or break up for parts
[Re: OneWorld]
#997534 - 13/07/12 12:26 AM
|
|
|
|
Perhaps you could PM me too, as I seem to have lost it. Never know when something might
happen to an aging digital desk.
|
Previous
Topics
Next
Threaded
Edit
Reply
Quote
