So here's the first hurdle:
I'm using the Controller Assignments learn mode and I've got the fader working on track 1. Now what's happening is all the other hardware functions on the mixer channel 1 (pan, mute, solo) are also registering on Logic's fader. When I try to learn the pan control the hardware fader then controls Logic's pan, instead of the fader.

Also, the hardware pan only pushes Logic's pan (and fader) half way - from hard left to centre. I've changed the value Max/Min in Controller Assignments to 0-64, but this doesn't have an effect.

Does this sound like something that need to be fixed in the mixer so it sends out different data for the fader and pan, or do I need to tell Logic to look for something different?

The mixer manual gives the following Midi controller change messages for channel 1:

Fader/level encoder value:
CC99 - 1
CC98 - 0
CC06 - 0
CC38 - 1-127

Pan:
CC99 - 1
CC98 - 33
CC06 - 0
CC38 - 0-64

Also got info for mute, solo, record arm, eq, etc.
Any of that mean anything to anyone?!

Post Extras