I have a live sound monitor system question for the experts.
Hear is the gear I am working with . . .
Behringer 2442fx Non-Powered Mixer with 2 Aux sends for monitors.
1 Samson S1500 Power Amp
http://www.samsontech.com/samson/products/power-amplifiers/s-series/s1500/
750 watts per channel into 4 ohms (stereo mode) and 1500 watts into 8 ohms (bridged mono mode)
4 Community CSX28-S2 Monitors
http://www.communitypro.com/files/literature/spec%20sheets/discontinued/cs x28_s2.pdf
Frequency Response: 70-18,000 Hz
Power Handling: 100W RMS 250W Program
Recommended Amp: 200W to 300W @ 8 Ohms
Sensitivity at 1W/1M: 97.5 dB
Nominal Dispersion: 90o x 60o (HxV)
Nominal Impedance: 8 ohms
Crossover Frequency: 3,000 Hz
I would like to run two separate monitor mixes, but I will run only one if that is all I can do with my equipment. What is the best way to hook all of this up!
Thank you in advance for your help!
Edited by Neil.Helgeson (19/12/11 02:08 PM)
Post Extras
|
Flat
Edit
Reply
Quote



