You are here
Ableton Live - how to modify Audio track L/R wave presence
a home recording newbie here,
my query is how do i get to have the L & R waveforms during audio track recording in my Ableton Live - LE/6?
even if i have set the audio preference with both 1&2 I/O to be mono & stereo, i still get only 1 side of the waveform during recording.
my setup is...
notebock pc(lenovo R400) with winXP, also installed Ableton Live LE/6
USB connected to external audio interface E-MU 0404
USB connected to M-audio Oxygen 8 ver.2
guitar input goes to a line6 pocket pod -> (hi-Z line L/R) e-mu 0404 -> (usb2.0 port) notebook pc
shifting the guitar signal to either L or R hi-Z line of the 0404, the recorded waveform only shows in L or R with respect to the 0404 line input.
also, is it necessary, to be able to have the functioning L & R, to have the Center Panning to be effective? coz i think it is so.
your help is greatly appreciated
many thanks in advance
- Posts: 1
- Joined: Tue Jun 24, 2008 11:00 pm
- Location: Asia, Philippines
Who is online
Users browsing this forum: No registered users and 10 guests