You are here

Missing x over software

For performing musicians and engineers: stagecraft, engineering and gear.

Missing x over software

Postby jcdj » Wed May 09, 2012 4:12 pm

Hey everyone new to this stuff I have got my hands one a 2nd hand Lem dx 26 plus, been searching Google found a few links on german sites but no luck all the links are dead.

Anyone know where I can get it I am even struggling finding LEM's website had it yesterday but now I can not find it.
O I need the dx editor software

Cheers
Jay
jcdj
Posts: 2
Joined: Tue May 08, 2012 11:00 pm

Re: Missing x over software

Postby DGL. » Wed May 09, 2012 4:31 pm

This is the link for the LEM website http://www.generalmusic.com/home.asp?sez=2

Unfortunatly Generalmusic went out of buisness a few years ago (they made a good range of products my S2 and LEM RDX204U are good products), however site still seems to be up and running!

Software is available from here
Found link on LEM website http://www.generalmusic.com/Download/LEM/OS/dx_editor/DXEb400.exe

Full list of downloads Etc. are here including OS updates http://www.generalmusic.com/prodotti.asp?cod=951363&frame=do

*note* before updating read this http://www.generalmusic.com/prodotti.asp?cod=951363&ext=extra/dxseries/dx26_osupgrade_eng.htm
as some units cannot be updated.
DGL.
Frequent Poster
Posts: 611
Joined: Thu Oct 27, 2011 11:00 pm
Location: Portland, Dorset

Re: Missing x over software

Postby jcdj » Wed May 09, 2012 5:16 pm

Hey thanks a million dont think it will work as I can not install it on my Win7 laptop dunno if I can use it at all now lucky I did not pay for it, think there might be a way to do it on the unit though so I will play with that when I get it
jcdj
Posts: 2
Joined: Tue May 08, 2012 11:00 pm

Re: Missing x over software

Postby DGL. » Wed May 09, 2012 5:28 pm

You could run it under a virtual machine (VM Ware or XP mode in win 7 or pick up an old pc to run it)
Believe GEM went bust around the time win 7 was released.
DGL.
Frequent Poster
Posts: 611
Joined: Thu Oct 27, 2011 11:00 pm
Location: Portland, Dorset


Who is online

Users browsing this forum: No registered users and 1 guest