19/07/2012 Bookmark and Share

Kemper release new amp profiles & effects for Profiling Amp

Press Release: Kemper Amps have released the brand new Software Version 1.1 for the Kemper Profiling Amplifier. This mandatory update includes a set of brand new Lo-Fi FX, and a collection of 50 additional Amp Profiles carefully collected from a range of guitar players with outstanding amp set-ups.

Since its release in December 2011, the Kemper Profiling Amplifier has found its way into the recording studios and live rigs of internationally renowned producers and guitarists. The possibility to take the unique sound of your own, personal amp rig into any studio, as well as on tour, has opened up a whole new world of possibilities to guitarists.

The new Amp Profile set:

The profiles were all done by the Kemper Profiler Team which consists of Manfred Franzkowiak, Markus Wienstroer and Sound engineer Dirk Baldringer. All the profiles were taken at Dirk Baldringer’s Studio 25, where they worked tirelessly to create the best possible profiles with that "3D-like" feeling. The team is delighted with the results and excited that these profiles are now available to the public.The new Amp Profiles as well as the new FX set come free of charge with the Kemper Profiling Amp and can also be found in the download section on the webiste: www.kemper-amps.com

The Lo-Fi FX Set:

The Lofi update for the Kemper Profiling Amplifier brings eight new and unusual effects that, up until now, were mostly found only in synthesizers or plugins. The effects are: Rate Reducer, Ring Modulator, Frequency Shifter, Recti Shaper, Bit Shaper, Soft Shaper, Hard Shaper and Wave Shaper.

All new effects are available in the 'Stomps' as well as in the 'Effects' section. Due to their non-linear character, the results of placing them pre-amp or post-amp can be significantly different.

The Rate Reducer, Ring Modulator and Frequency Shifter expand the pedal-controlled effects (orange LED), and can be modified with an expression pedal or by an envelope follower (touch mode). Recti Shaper, Bit Shaper, Soft Shaper, Hard Shaper and Wave Shaper belong to the drive effects section (red LED).

For more info about the Kemper Profiling Amp, head to www.kemper-amps.com


 

Home | Search | News | Current Issue | Tablet Mag | Articles | Forum | Subscribe | Shop | Readers Ads

Advertise | Information | Digital Editions | Privacy Policy | Support

 

Email: Contact SOS

Telephone: +44 (0)1954 789888

Fax: +44 (0)1954 789895

Registered Office: Media House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom.

Sound On Sound Ltd is registered in England and Wales.

Company number: 3015516 VAT number: GB 638 5307 26

         

All contents copyright © SOS Publications Group and/or its licensors, 1985-2013. All rights reserved.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.

Web site designed & maintained by PB Associates | SOS | Relative Media