Q. Why is my DTC so noisy? Is it a faulty unit?

 
I recently purchased a Mindprint DTC and I've noticed that it produces quite a lot of hiss. It is not so obvious to the ear at first but after individually compressing instruments and playing them together, it becomes quite nasty. Also, if you are monitoring the signal from the DTC, you notice quite a large amount of noise on the analyser. I purchased the 24-bit S/PDIF module to find the same happens there. Whilst I was sold this as a mastering tool I am wondering if this is a design flaw. I have read some good reviews (including yours from SOS June 2002), but on a few web sites, similar problems are mentioned. I have done all the regular troubleshooting, such as changing cables and checking the power distribution of my system, and it all looks fine. I am wondering why my DTC is so noisy and if it is supposed to be.

Chris Frost

QA B1 DTC
Mindprint's Dual Tube Channel (DTC) remains the top choice of many professional users.
Mindprint's Dual Tube Channel (DTC) remains the top choice of many professional users.

Technical Editor Hugh Robjohns replies: This is tricky to answer without actually hearing the problem you are complaining about and knowing how you are using the product. However, the DTC remains a favourite processor of mine, and I've not had any serious noise problems when I've used it, so I would suspect either an operational problem or a faulty unit.

As it uses valves, it is possible that you have a faulty one, which could lead to excessive noise. Changing the valves is not difficult and replacements aren't expensive — but it might be worth getting the product properly checked-over by a qualified technician, in case anything more serious is wrong. Unlikely, but it's always best to get it checked.

Perhaps the more likely problem is an operational one. Setting an appropriate gain structure is important to optimise the signal levels through the unit. The other thing that intrigues me is that you say: "It is not so obvious to the ear at first but after individually compressing instruments and playing them together, it becomes quite nasty". Noise will always add and build in level, so processing individual instruments with the DTC will always produce a noisier result than simply processing the final mix. But I wonder if, in fact, you are over-compressing the instruments.

Ideally, you could send a short extract of some affected material, but it may be easier and quicker to get the unit checked-out or compared with another unit to make sure all is working as it should.

I've always found Mindprint to be helpful in resolving issues like this, so giving them a call might be a worthwhile step to take as well. Mindprint +49 6851 9050. 


February 2012
On sale now at main newsagents and bookstores (or buy direct from the SOS Web Shop)
SOS current Print Magazine: click here for FULL Contents list
Click image for February 2012
WIN Great Prizes in SOS Competitions!
 

Email: Contact SOS

Telephone: +44 (0)1954 789888

Fax: +44 (0)1954 789895

Registered Office: Media House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom.

Sound On Sound Ltd is registered in England and Wales.

Company number: 3015516 VAT number: GB 638 5307 26

         

All contents copyright © SOS Publications Group and/or its licensors, 1985-2012. All rights reserved.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.

Web site designed & maintained by PB Associates | SOS | Relative Media