You are here
I've recently bought a Klark Teknik KT-2A compressor to use with my Warm Audio TB12 preamp and noticed the TB12 has insert input and output sockets. What is the best practice when using outboard compressors with preamps when tracking?
Recently I started hearing a noise in my studio around 10-15 kHz. How can I find the cause and remove this unwanted noise?
I'm not really sure when it's best to use mono reverb effects — and how to pan the reverb when doing so — and when to use stereo reverb?
I think an unbalanced stereo source will work fine into a balanced TRS input, but only the left channel will be heard. Am I correct?
What should I do if my home studio's window is located at a mirror point?
Why do so many monitor manufacturers persevere with reflex-loaded active monitors?
I read your feature on gain staging a few years ago, but I’ve been following some blogs that say it isn’t at all necessary if you’re just working in software. Who’s right?
I recently watched a YouTube video in which it was recommended that you match the input and output level of every plug-in in a mix session...
In the review of LUFS Meter in June 2018 [you can read the review here:www...
Do you know where I can find a schematic for the TL Audio 5001 mic preamp?
I have a question regarding the Grace Design m201 mic preamp, and specifically its Mid-Sides matrix rotary switch, which...
Following a recent nearfield monitor review of mine in SOS — a product, it’s true to say, that I didn’t find entirely...