These gadgets offer more than the ability to patch your guitar or bass into a mic preamp!
Mission Engineering's VM-Pro buffered volume pedal, widely considered one of the best available, just got better!
Heritage have beefed up their OST4 and OST10 enclosures for 'Lunchbox'-format 500-series modules, hot on the heels of their new HA609A compressor/limiter.
Flock Audio have expanded their original digitally-controllable analogue patchbay concept — and produced a more affordable version.
The brainchild of Tim Loe, Capo Elevator is designed to counteract a fairly well-known issue that can arise when recording steel-strung acoustic guitars...
If you have an ASIO audio interface, you can now carry out T&M to AP's high standards using their software-only Flex system.
These DI boxes follow the company's usual 'tough as nails' build philosophy paired with well–conceived circuitry at an attractive price point.
If you're considering updating some old equipment with a balanced I/O, these boards come highly recommended.
Given its affordable price and compact format, is the Mini now the perfect choice tuner?
Elephant v1.92 turns the Bluetooth-enabled Dial peripheral into a quite remarkable knob controller of pretty much anything...
IsoAcoustics apply their proven decoupling technology to the guitar/bass speaker and amp markets.
Studio housekeeping is never glamorous, but a few minutes spent cleaning plugs and sockets can save hours of troubleshooting.
With their release of the MV-BT input module, Kali Audio's Lone Pine range of nearfield monitors can now be addressed over Bluetooth. But it's also ideal for any other pro monitors too.
The idea of an in-line gain booster placed between a moving-coil or ribbon mic and a mic preamp isn't new — so what makes this one special?
Klangfreund's Multimeter is quite literally a Swiss multi-purpose tool when it comes to metering, and is available in AU, AAX, VST and stand-alone formats.
If you use effects pedals, whether on stage or in the studio, running them from a high-quality power supply is essential to...
NUGEN Audio's SigMod VST3 plug-in is designed to be a sort of toolbox that provides an extremely flexible set of routing and...
I have a Roland RC‑30 looper pedal, but I want to be able to use a single microphone, set up so that I can use a foot pedal to switch the mic from the PA to the looper...
Described as 'compact Eurorack enclosures' by 4MS, Pods are a set of small boxes to put just a handful of modules in...
This innovative system offers software-controllable 64-point patching with switchable 48V phantom power — but your audio remains analogue.
If you're looking to add wireless functionality to your favourite mic, Xvive's U3 could be just what you need.
Create an account