You are here

Focal Shape series monitors

All about the tools and techniques involved in capturing sound, in the studio or on location.

Focal Shape series monitors

Postby craigtumps » Fri Jul 28, 2017 7:10 am

Hi Guys, Anyone tried these? Will there be an SOS review? That would be great. No other major reviews of these out there yet.
I would like to know more about these passive radiators and if they really help in smaller rooms etc. :thumbup:
craigtumps
Poster
Posts: 42
Joined: Tue Jan 24, 2017 5:49 pm

Re: Focal Shape series monitors

Postby ef37a » Fri Jul 28, 2017 7:14 am

Why would a passive radiator be of any advantage in a small room?

Dave.
ef37a
Jedi Poster
Posts: 8946
Joined: Sun May 28, 2006 11:00 pm
Location: northampton uk

Re: Focal Shape series monitors

Postby blinddrew » Fri Jul 28, 2017 8:06 am

There's a review in this month's magazine :)
User avatar
blinddrew
Jedi Poster
Posts: 4125
Joined: Sat Jul 04, 2015 11:00 pm
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: Focal Shape series monitors

Postby craigtumps » Fri Jul 28, 2017 9:14 am

blinddrew wrote:There's a review in this month's magazine :)

Is there! Haha I better check. :headbang:
craigtumps
Poster
Posts: 42
Joined: Tue Jan 24, 2017 5:49 pm

Re: Focal Shape series monitors

Postby craigtumps » Fri Jul 28, 2017 9:17 am

ef37a wrote:Why would a passive radiator be of any advantage in a small room?

Dave.

I don't know, its what Focal say on their marketing. That's why I'm interested in a review :D
craigtumps
Poster
Posts: 42
Joined: Tue Jan 24, 2017 5:49 pm

Re: Focal Shape series monitors

Postby ef37a » Fri Jul 28, 2017 9:21 am

craigtumps wrote:
ef37a wrote:Why would a passive radiator be of any advantage in a small room?

Dave.

I don't know, its what Focal say on their marketing. That's why I'm interested in a review :D

Oh! 'MARKETING'! I did read the review but do not remember owt to do with the room advantages of Auxillary Bass Radiators (as Celestion I think, dubbed them yonks ago) ?

Will have another butcher's...

Dave.
ef37a
Jedi Poster
Posts: 8946
Joined: Sun May 28, 2006 11:00 pm
Location: northampton uk

Re: Focal Shape series monitors

Postby ef37a » Fri Jul 28, 2017 9:38 am

Ah so! The PR s are tuned (it says) to a very low frequency and this allows the speakers to be mounted nearer walls than those with higher port frequencies but no explanation is given as to the mechanics/acoustics/ (veracity!?) of that statement.

Yes, you CAN have a lower F in a given cab size IF you use an ABR/PR but the advantage, AFAICS, is the lower TUNING allowed, not any intrinsic property of the radiator?

One advantage they could have claimed is the protection given to the driven cone from sub sonic frequencies which can damage conventional ported speakers since below the port frequency there is zero loading. Not such an issue of course in an active speaker with built in protection.

Anyhooos! Marketing bllx notwithstanding, I WANT a pair! I might just about manage the price if I put QVC under TV child protection from 'er indoors! The Footprint 01s are way out of my league but in any case, a 'dim' loudspeaker is the LAST thing 'I' need!

Dave.
ef37a
Jedi Poster
Posts: 8946
Joined: Sun May 28, 2006 11:00 pm
Location: northampton uk

Re: Focal Shape series monitors

Postby craigtumps » Thu Apr 19, 2018 3:18 pm

All I can say is I have the Focal Shape Twin's and they are really nice speakers. Im finding mixing on them much quicker and better translation than what I had before. Although I only had KRK Rokit's before.
and my room is a hopeless funny shaped mess. :thumbup:
craigtumps
Poster
Posts: 42
Joined: Tue Jan 24, 2017 5:49 pm

Re: Focal Shape series monitors

Postby synththeory » Thu Jun 14, 2018 3:46 pm

Hi

Putting this out on a few forums as I have had a pair of SHAPE 65 for 6 months and one of them failed completely with sudden power loss mid session at 75-80 db and below ( blown in line fuse, replacement fuse blew as well).
The other SHAPE monitor is fine and is on the same ART PB4x4 power distributer. THere were no power failures, spikes or any other electrical anomolies. I can only think that a component (or components) has failed on the SHAPE 65 internal powersupply or amp. My ADAM and EVENT monitors also work fine on the same power outlet with no issues for years.

THe unit has been returned to the retailer and they have acknowledged and confirmed the fault but as such have yet to have the unit returned by them to FOCAL under warranty (they have not had a reply from FOCAL yet). I have been informed this could take upto 60 days to get the repair unit back to me, once FOCAL have accepted the unit back.

My emails to FOCAL have so far had no reply.

All very frustrating.
synththeory
New here
Posts: 4
Joined: Wed Dec 06, 2017 1:20 am

Re: Focal Shape series monitors

Postby Hugh Robjohns » Thu Jun 14, 2018 4:25 pm

The rate of electronic failure is usually described by the 'bath tub curve', meaning that there are a relatively high number of failures at the factory, but the failure rate then falls steeply to a very low level and remains there for a long period until the significant components near the end of their working life, at which point the failure rate climbs steeply again.

Manufacturers try to ensure that the early failures are all weeded out at the factory through the quality control testing phase , so that the devices that go to the end users are already into the bottom of the bath tub curve and thus reliable for a long period.

However, we are talking statistic here, and the reality is that some products will be made that appear completely sound, but then fail shortly into their working life. It is very frustrating, but statistically it's always going to happen to someone.

As you say, in your case it does sound like a power supply failure of some sort.

Clearly, the product is well within the warranty period but there may also be additional consumer rights that apply if it has failed within 6 months of purchase.

I don't know where in the world you are, but check the consumer rights applicable to you as you may be eligible for a refund or replacement direct from the retailer in a much shorter timescale, than having to wait for Focal to service under their warranty terms.

H
User avatar
Hugh Robjohns
Moderator
Posts: 21013
Joined: Thu Jul 24, 2003 11:00 pm
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: Focal Shape series monitors

Postby synththeory » Thu Jun 14, 2018 4:47 pm

Thanks Hugh

U.K purchase....U.K use. Bought from a recognised FOCAL retailer on December 06/12/2017.

I did say to them that I would like a new replacement unit in my early email exchanged but feel as though I have been fobbed off a bit and given the usual this could take 60days for repair.

So my unit is just outside 6 months although FOCAL warranty is 2 years. I was under the impression that maybe the retailer would offer a new replacement as good will.

What do you think?
synththeory
New here
Posts: 4
Joined: Wed Dec 06, 2017 1:20 am

Re: Focal Shape series monitors

Postby Hugh Robjohns » Thu Jun 14, 2018 6:08 pm

As I said, read up on your consumer rights....

H
User avatar
Hugh Robjohns
Moderator
Posts: 21013
Joined: Thu Jul 24, 2003 11:00 pm
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: Focal Shape series monitors

Postby synththeory » Fri Jun 15, 2018 3:57 pm

Yep, thanks Hugh

Been a while since I had to use my consumer rights.....done some homework:-)

Doing what I can with the retailer to see if they choose to make good.

All the best.
synththeory
New here
Posts: 4
Joined: Wed Dec 06, 2017 1:20 am

Re: Focal Shape series monitors

Postby ef37a » Fri Jun 15, 2018 5:14 pm

I wish you well.
I cannot understand a company of such eminence prevaricating around the shrubbery?

The cost of a replacement power supply, if that is what it is, must be a quite small fraction of the £250 or so each speaker costs? I would have thought a speedy resolution was worth the minor cost for the goodwill? Of course, if there is a "stock fault" and the service dep't is drowning in blown PSUs.........!

Dave.
ef37a
Jedi Poster
Posts: 8946
Joined: Sun May 28, 2006 11:00 pm
Location: northampton uk

Re: Focal Shape series monitors

Postby synththeory » Thu Jun 21, 2018 9:34 am

Retailer has said unit is now with FOCAL undergoing repair process. I am suprised that when I used Focal support to send Emails they have not replied at all to my questions.
What I'd also like to know is the actual component (or components) that failed so that if it happens in the future I can get a repair done quickly and efficiently.
Not have to wait and send it off with all the hassle and inconvenience that this causes (but I doubt anyone from FOCAL will be free with this information!)
synththeory
New here
Posts: 4
Joined: Wed Dec 06, 2017 1:20 am

Re: Focal Shape series monitors

Postby Wonks » Thu Jun 21, 2018 11:10 am

Unless you are skilled in changing the tiny components and chips found on surface mount PCBs, there are probably no real user-serviceable parts inside. Their 'repair' will consist of swapping out a complete circuit board as it's normally cheaper than the labour cost of someone checking out the board, replacing any faulty components and then testing the board/speaker once fixed.
User avatar
Wonks
Jedi Poster
Posts: 5362
Joined: Wed May 28, 2003 11:00 pm
Location: Reading, UK
Now even grumpier than Ivan in his heyday.


Who is online

Users browsing this forum: No registered users