You are here

12v Adaptor Powering 18v Unit

All about the tools and techniques involved in capturing sound, in the studio or on location.

12v Adaptor Powering 18v Unit

Postby jimh76 » Mon Sep 10, 2018 5:03 pm

Hi

I have recently bought a Samson c control unit, but the adaptor wasn't included (2nd game off eBay). The unit requires 18v A.C. at 1000ma. I already have a 12v A.C. at 1000ma adaptor and was wondering if this would work? I know it shouldn't blow it as it's less voltage, but just thought I'd ask before pluging it in.

Any thoughts?

Jim
jimh76
Poster
Posts: 12
Joined: Fri Aug 10, 2018 10:29 am

Re: 12v Adaptor Powering 18v Unit

Postby Wonks » Mon Sep 10, 2018 5:35 pm

It may work in some instances as it will be all-analogue circuits, but you'll be loosing headroom so you will get signal degradation. It may also try to draw more current than normal as it doesn't have its usual voltage, which could affect the 12v PSU. You can get a suitable PSU from eBay for around £10-£15 at most, so it's really not worth the risk or the effect on your monitor signal.
User avatar
Wonks
Jedi Poster
Posts: 6107
Joined: Thu May 29, 2003 12:00 am
Location: Reading, UK
Now even grumpier than Ivan in his heyday.

Re: 12v Adaptor Powering 18v Unit

Postby Rich Hanson » Tue Sep 11, 2018 1:24 pm

What Wonks said!

You're highly unlikely to damage your Samson, but you do run a real risk of blowing up the PSU on account of the increased current draw (depends on the design of the PSU).
Rich Hanson
Frequent Poster
Posts: 804
Joined: Sat Sep 06, 2003 12:00 am
Location: UK

Re: 12v Adaptor Powering 18v Unit

Postby Sam Spoons » Tue Sep 11, 2018 5:52 pm

+1 except, it shouldn't draw more current from the PSU but less.
User avatar
Sam Spoons
Jedi Poster
Posts: 7110
Joined: Thu Jan 23, 2003 1:00 am
Location: Manchester UK
Finally taking this recording lark seriously (and recording my Gypsy Jazz CD)........


Who is online

Users browsing this forum: Eddy Deegan, simdarv, Still Vibrations