You are here

Leads

All about the tools and techniques involved in capturing sound, in the studio or on location.

Leads

Postby Scouser » Tue Jun 18, 2019 5:42 pm

Time I replaced my old leads, getting a bit tired now, had them for years. Just standard mic, guitar and patch leads. Colour coded if poss. I thought this would be the best place to ask, don’t want to spend a fortune.
Scouser
Frequent Poster
Posts: 584
Joined: Mon Oct 04, 2004 12:00 am

Re: Leads

Postby Eddy Deegan » Tue Jun 18, 2019 6:34 pm

The cheapest way to do it would be to make your own. Canford do a wide range of cable types and if you search the forum for 'Canford' you'll find a few posts discussing the subject.
User avatar
Eddy Deegan
Moderator
Posts: 4517
Joined: Wed Sep 01, 2004 12:00 am
Location: Brighton & Hove, UK
Some of my works.
Please consider submitting an original track to the 2nd SOS Forum Album project!
 

Re: Leads

Postby Sam Spoons » Tue Jun 18, 2019 6:36 pm

Teach a man where to buy good leads and he'll have good leads for a couple of years, teach him to solder and he'll have burned fingers for life :D
User avatar
Sam Spoons
Jedi Poster
Posts: 12984
Joined: Thu Jan 23, 2003 1:00 am
Location: Manchester UK
Finally taking this recording lark seriously (and recording my Gypsy Jazz CD)........

Re: Leads

Postby Hugh Robjohns » Tue Jun 18, 2019 6:43 pm

Scouser wrote:Time I replaced my old leads, getting a bit tired now, had them for years.

What does 'tired' mean?

Some of my cables are over thirty years old and are still absolutely fine.

The key is good quality connectors (I prefer Neutrik, but Switchcraft and Cannon are okay; avoid the cheap versions...) and good cable (I use Canford and VDC; sensibly prices, sensible specs, all the colour options you could want, and dependable). Avoid anything with monster in the name, or with silly constructions, or with claimed directional signal flows....

...don’t want to spend a fortune.

Best if you learn to make your own cables then. If that's of no interest there are plenty of one-man-bands around who will make custom cables to order with the right bits in the right way.

H
User avatar
Hugh Robjohns
Moderator
Posts: 27938
Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: Leads

Postby Music Wolf » Tue Jun 18, 2019 7:07 pm

Of course you could learn how to solder (not that difficult, plenty of 'how to' vids on line, a temperature controlled iron isn't very expensive etc) then you could buy Neutrik connectors and good quality cable and make up leads of the right length, colour coded if you prefer, that will last a life time, or............................................

Visit https://www.russandrews.com/ or https://zaolla.com/collections/guitar-cables. You won't have to worry about signal quality because you will no longer be able to afford the kit at either end.
User avatar
Music Wolf
Frequent Poster (Level2)
Posts: 2079
Joined: Fri Feb 17, 2006 1:00 am
Location: Exiled to St Helens

Re: Leads

Postby Eddy Deegan » Wed Jun 19, 2019 2:31 am

Sam Spoons wrote:Teach a man where to buy good leads and he'll have good leads for a couple of years, teach him to solder and he'll have burned fingers for life :D

A few less scars on the wallet though ;)

Music Wolf wrote:Visit https://www.russandrews.com/ or https://zaolla.com/collections/guitar-cables. You won't have to worry about signal quality because you will no longer be able to afford the kit at either end.

Flippin' 'eck! I need to stop clicking on links like these because it makes my blood boil, but thank you for the great examples of squamata-related lubricants :clap: :o
User avatar
Eddy Deegan
Moderator
Posts: 4517
Joined: Wed Sep 01, 2004 12:00 am
Location: Brighton & Hove, UK
Some of my works.
Please consider submitting an original track to the 2nd SOS Forum Album project!
 

Re: Leads

Postby Hugh Robjohns » Wed Jun 19, 2019 9:07 am

Eddy Deegan wrote:....great examples of squamata-related lubricants

:D Must try and remember that one! :clap:
User avatar
Hugh Robjohns
Moderator
Posts: 27938
Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: Leads

Postby Brian M Rose » Wed Jun 19, 2019 12:03 pm

Yes, it's really annoying. We can just smile, but there are those out there who will buy anything. I remember being shocked at my local HiFi shop at seeing a 1M BNC cable costing more than a 100M drum of PSF 1/3 cable ; about £100.00. And yes, this was a M*****r cable. The salesman told me that the BBC ONLY used M*****r cable. I was a little surprised as I explained, that I had just installed the cameras for Grange Hill, and that we had used PSF 1/3 cables (from Canford I believe.)
I was told in no uncertain terms that I didn't know what I was talking about and that there was no such cable.
You can't win. Mind you, I did use those £500.00 super 13A fuses :lol:
Brian M Rose
Regular
Posts: 180
Joined: Mon Sep 05, 2011 12:00 am

Re: Leads

Postby Hugh Robjohns » Wed Jun 19, 2019 12:24 pm

Ah yes... they sound really warm and lush... I use them too... :beamup:
User avatar
Hugh Robjohns
Moderator
Posts: 27938
Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: Leads

Postby kingmoot » Wed Jun 19, 2019 12:43 pm

I've just re-wired my studio with Stagg cables and I'm pretty happy with the build quality of said cables.

https://www.staggmusic.com/en/products/ ... dio/cables
kingmoot
Poster
Posts: 12
Joined: Tue May 14, 2019 12:35 pm

Re: Leads

Postby CS70 » Wed Jun 19, 2019 1:19 pm

It's not only audio.. the video/filming world is full of absolutely mundane stuff which is priced astronomically more than the same mundane stuff sourced from somewhere else... but which people buy. Differences of 1-2000 % in price aren't unusual.

For example, I was planning a night filming session the other day and realized I had lost a connection wire. Needing it in a hurry, I went to the local foto/film shop. Which I never use, and I remembered why.

The cable in question is a thin D-TAB to DC-in, about 10cm long. Goes from a V-Mount battery attached to the back of a led light panel to the DC in of said panel. It's thin wire and two plastic connectors: a little copper, a little rubber and a little plastic. I can source it for less than a dollar apiece if I have the time to wait - which is about the right price considering the marginal costs, plus a quite hefty percentage in profit. The bloody cable costed me 45 dollars!

At least tough nobody told me it was a special customized cable. That would have costed 450.. :D
User avatar
CS70
Jedi Poster
Posts: 5792
Joined: Mon Nov 26, 2012 1:00 am
Location: Oslo, Norway
Silver Spoon - Check out our latest video and the FB page

Re: Leads

Postby ManFromGlass » Wed Jun 19, 2019 1:40 pm

Don’t get me started on Apple cables - grrrr.
How the hell does the software know that it’s not an Apple approved cable?
Perhaps it can sense the cable was affordable?
User avatar
ManFromGlass
Frequent Poster (Level2)
Posts: 3182
Joined: Sun Jul 24, 2011 12:00 am
Location: In the woods in Canada

Re: Leads

Postby CS70 » Wed Jun 19, 2019 1:43 pm

Inside an Apple cable there’s a chip whose function is to say “I am an apple cable”

And of course you pay for it, it’s quite an expensive chip!
User avatar
CS70
Jedi Poster
Posts: 5792
Joined: Mon Nov 26, 2012 1:00 am
Location: Oslo, Norway
Silver Spoon - Check out our latest video and the FB page

Re: Leads

Postby Sam Spoons » Wed Jun 19, 2019 1:47 pm

The nice thing is that PoundLand cables have a clone of the same chip so work just fine for a while at least. TBF they are not as robust but my cables don't usually last long enough to wear out as the guy lost or suffer from physical trauma......
User avatar
Sam Spoons
Jedi Poster
Posts: 12984
Joined: Thu Jan 23, 2003 1:00 am
Location: Manchester UK
Finally taking this recording lark seriously (and recording my Gypsy Jazz CD)........

Re: Leads

Postby ef37a » Wed Jun 19, 2019 6:51 pm

Sam Spoons wrote:The nice thing is that PoundLand cables have a clone of the same chip so work just fine for a while at least. TBF they are not as robust but my cables don't usually last long enough to wear out as the guy lost or suffer from physical trauma......

Yup. When I bought a wallet and a USB A to C cable for my new Sony android phone a month or so ago the cable was a tenner. PoundLand a quid and I can tell no difference in performance.

There are limits though? RockBottom type shops sell CAT5/6 patch cables very cheaply and I had one that had a dent in it, a moulding fault not damage, and one pair was O/C. I am also betting even a good cable would not perform to top data transfer spec? Not that it would be noticed by 99% of the public.

There are two other advantages to "rolling your own".
1) You will be able to fix cables of a Sunday night which is when one-off recording opportunities always turn up and cables fail!
2) You will be able to make "specials" which don't exist as ready mades.

Dave.
ef37a
Jedi Poster
Posts: 11805
Joined: Mon May 29, 2006 12:00 am
Location: northampton uk

Next