You are here

Dayton Audio EMM6

All about the tools and techniques involved in capturing sound, in the studio or on location.

Dayton Audio EMM6

Postby GRAHAM99 » Fri Nov 08, 2019 7:58 pm

I bought a Dsyton Audio Emm6 mic in a junk shop for 50p!!
Looks like they are used for measurement purposes.
I have tried recording an acoustic guitar with it and it sounds pretty good.
Anyone know anything about these mics?
Posts: 128
Joined: Fri Nov 15, 2002 1:00 am

Re: Dayton Audio EMM6

Postby cyrano.mac » Sat Nov 09, 2019 3:47 pm

Almost the same as a Behringer ECM8000. Just a basic omni electret.

The internet is full about these mics. I've never opened a Dayton, but there are a few revisions to the ECM8000. The oldest ones are made with though-hole components. The newer ones have SMB components. There's an error in the ECM8000's schematics. Easily correctable and yields +6 dB output. The one caveat is that the electret capsule is glued in place. Very hard to remove without destroying it.
Posts: 75
Joined: Sun Jun 02, 2019 5:00 pm

Who is online

Users browsing this forum: No registered users