I have connected the MIDI out of MFC 10 to Yamaha to Yamaha workstation keyboard: PSR-A3000 (newer model) which is connected to iMac via USB. I have programmed MFC 10, foot control to send cc 11 ( expression).
However, When I move on the foot control it doesn't send any midi messages. I am monitoring it using a MIDI monitor app on iMac.
Since MFC is not USB, I have added it into Mac's MIDI studio as general midi but its Icon doesn't lid up when I press on MFC footswitches and control.
The MIDI Preset on PSR is All Parts. I have learned that Yamaha PSR by default have midi thru on. According to the manual of MFC 10:
Status Second Third
BnH 0BH vvH
I have set:
n = 0 ( channel 1)
vv = 127 on MFC10.
Am I doing anything wrong?
I noticed that one cannot send expression via joystick ( live control) and foot or Keyboard panel as there is no option in the function list ( Articulation 1, ... OST-).
My goal is to send cc 11 to Kontakt 5 from a controller.
So this is not possible and should I use another approach?
PS. I can do it with Touch OSC.
You are here
Yamaha MFC10 Foot Control Not Sending MIDI
All about the tools and techniques involved in capturing sound, in the studio or on location.
4 posts • Page 1 of 1