You are here

Alesis ADAT Record Help Needed

All about the tools and techniques involved in capturing sound, in the studio or on location.

Moderator: Moderators

Re: Alesis ADAT Record Help Needed

Postby James Perrett » Mon Jun 07, 2021 2:06 pm

Just a quick point - the machine in the video is an XT20 - not an LX20. However, the displays and operation are very similar between the two machines.
User avatar
James Perrett
Moderator
Posts: 10799
Joined: Mon Sep 10, 2001 12:00 am
Location: The wilds of Hampshire
JRP Music - Audio Mastering and Restoration. JRP Music Facebook Page

Re: Alesis ADAT Record Help Needed

Postby Tim Gillett » Mon Jun 07, 2021 3:06 pm

A small point which may or may not be relevent: sometimes with recorders it's necessary to press and hold down the record button, then press the play button with the record button still held down. If not, it may go into play mode, not record.
Tim Gillett
Frequent Poster (Level2)
Posts: 2384
Joined: Wed Jan 30, 2013 1:00 am
Location: Perth, Western Australia

Re: Alesis ADAT Record Help Needed

Postby pr660 » Tue Jun 08, 2021 8:05 pm

A previously recorded tape was inserted to play and although the counter is advancing, there is no activity in the track meters. Play button remains blinking during this action.

WHEN POWERING ON TODAY I get a message: no go od tc
pr660
New here
Posts: 5
Joined: Fri Jun 04, 2021 7:15 pm

Re: Alesis ADAT Record Help Needed

Postby Hugh Robjohns » Tue Jun 08, 2021 8:31 pm

According to the manual, that error message means:

no 9ood tc

NoTimeCode.

The XT20 is reading control track pulses, but no helical scan time code. Usually, a video tape has been inserted into the XT20. Format the tape in the ADAT format.

NOTE: “No good tc” will also appear if you insert a Type II (20-bit) tape into an older, Type I-only machine. Make a 16-bit clone of any 20-bit tapes for use in older-generation machines.
User avatar
Hugh Robjohns
Moderator
Posts: 31085
Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Technical Editor, Sound On Sound
In my world, things get less strange when I read the manual... 

Previous