You are here

good cables?

For everything after the recording stage: hardware/software and how you use it.

good cables?

Postby chew_rocket » Mon Apr 26, 2010 9:36 pm

I'm stocking up on microphone cables and want to know what Im looking for. I dont want any fiddling around so I want to buy pre made female-male XLRs. So...What do I look for in a good cable?
User avatar
chew_rocket
Regular
Posts: 336
Joined: Wed Oct 21, 2009 12:00 am

Re: good cables?

Postby ken long » Mon Apr 26, 2010 9:43 pm

Mogami or Van Dam have never let me down. WIth Neutrik connectors.

Unless you have a set number of cables you want to purchase and aren't thinking about getting some more, I would recommend making your own. Its MUCH MUCH cheaper and there's a great sense of satisfaction in making your own with bespoke lengths.

I'm not solder expert but it really is that easy.

ken
User avatar
ken long
Frequent Poster (Level2)
Posts: 3365
Joined: Mon Jan 21, 2008 1:00 am
Location: Somers Town
I'm All Ears.

Re: good cables?

Postby John Willett » Tue Apr 27, 2010 11:49 am

Canford Audio do custom cables. You can choose the cable type from their catalogue and make sure you get them done with genuine Neutrik connectors.
User avatar
John Willett
Jedi Poster
Posts: 7203
Joined: Tue Mar 07, 2000 1:00 am
Location: Oxfordshire UK
John
Sound-Link ProAudio
Circle Sound Services
Sound-Link are UK Distributors for: Microtech Gefell, ME-Geithain, AETA, HUM, Håkan, Meyer Turtle