You are here

Mac mini rumour... (it's true!)

Page 6 of 6

Re: Mac mini rumour... (it's true!)

PostPosted: Wed Oct 31, 2018 10:07 pm
by Humble Bee
That's the deal!
:clap:

Re: Mac mini rumour...

PostPosted: Thu Nov 01, 2018 12:17 pm
by ConcertinaChap
Agharta wrote:This is a halfway house in terms of price and performance:
https://www.anandtech.com/show/13510/my ... dge-review

Don't know if it supports Apple gear.

What really winds the price up is using TB3 protocol rather than Gen 2. I should have thought Apple kit would be fine as the OS has supported NVMe for a while now.

CC

Re: Mac mini rumour... (it's true!)

PostPosted: Thu Nov 01, 2018 6:22 pm
by Humble Bee
Can one boot from an external TB3 drive?

That would make the internal SDD less critical with time...

Re: Mac mini rumour... (it's true!)

PostPosted: Thu Nov 01, 2018 10:28 pm
by ConcertinaChap
You can boot from an external USB drive. I've not tried with a TB drive but I've no reason to doubt you can.

CC

Re: Mac mini rumour... (it's true!)

PostPosted: Thu Nov 08, 2018 2:35 pm
by redlester
Well there we have it, finally confirmed that these are not "officially" user upgradeable.

https://support.apple.com/en-gb/HT205041

To upgrade the memory in your Mac mini (2018), go to an Apple Store or Apple Authorized Service Provider.

However....
https://www.macrumors.com/2018/11/08/20 ... e-process/

Re: Mac mini rumour... (it's true!)

PostPosted: Thu Nov 08, 2018 6:38 pm
by G-Doubleyou
Yep it can be done with the proper tools.

https://www.youtube.com/watch?v=2UrSLnn ... e=youtu.be

:clap:

Re: Mac mini rumour... (it's true!)

PostPosted: Thu Nov 08, 2018 7:25 pm
by Humble Bee
That doesn't look too complicated.

Good news!

:thumbup:

Re: Mac mini rumour... (it's true!)

PostPosted: Fri Nov 09, 2018 2:08 pm
by ConcertinaChap
Wimp that I am that's definitely beyond my paygrade. Fortunately, should I ever get one of these, I have an Apple authorised repairer nearby who are not above installing Kingston RAM if asked to in this sort of situation so that's the route I'd take.

Thanks for the link.

CC

Re: Mac mini rumour... (it's true!)

PostPosted: Fri Nov 09, 2018 2:17 pm
by desmond
These things are pretty easy to do with an iFixit guide and a little care and patience...

If you're not the "care and patience" type, then yes, get someone else to do it... :tongue:

Re: Mac mini rumour... (it's true!)

PostPosted: Fri Nov 09, 2018 2:38 pm
by ConcertinaChap
desmond wrote:If you're not the "care and patience" type

Would that I were ... :)

CC

Re: Mac mini rumour... (it's true!)

PostPosted: Fri Nov 09, 2018 3:21 pm
by Humble Bee
As a master watchmaker by profession these screws look humongously big! ;)

Re: Mac mini rumour... (it's true!)

PostPosted: Fri Nov 09, 2018 6:54 pm
by G-Doubleyou
when I modified my 2012 Mini OWC had kits with tools supplied and step by step video tutorials.

Looks to be about the same level of complexity.

:thumbup:

Re: Mac mini rumour... (it's true!)

PostPosted: Fri Nov 09, 2018 7:21 pm
by desmond
Humble Bee wrote:As a master watchmaker by profession these screws look humongously big! ;)

Patience only goes *so* far... :o :lol:

It's a rare individual who does that stuff... :clap:

Re: Mac mini rumour... (it's true!)

PostPosted: Fri Nov 09, 2018 7:26 pm
by Sam Spoons
ConcertinaChap wrote:Wimp that I am that's definitely beyond my paygrade. Fortunately, should I ever get one of these, I have an Apple authorised repairer nearby who are not above installing Kingston RAM if asked to in this sort of situation so that's the route I'd take.

Thanks for the link.

CC

Lucky you CC, when I took my 2012 MBP for repair my local (ish) Apple approved repairer wouldn't even install the optical drive from my older (2011) MBP to replace the failed one in the new MBP (which I had removed, along with the spare) as they said they weren't allowed to do so and if Apple found out they would be in trouble :headbang: I just took it home with me and stuck it in myself........

Re: Mac mini rumour... (it's true!)

PostPosted: Fri Nov 09, 2018 8:46 pm
by blinddrew
Humble Bee wrote:As a master watchmaker by profession these screws look humongously big! ;)
And on the positive side we know where to go next time we're trying to decipher some tiny writing on a badly scanned instruction manual... ;)