You are here
Logic X EVOC vocoder bounce in place?
3 posts
• Page 1 of 1
Logic X EVOC vocoder bounce in place?
Any idea how I bounce a vocoder track to audio? Bounce in place doesn't work.
- MarkOne
- Frequent Poster
- Posts: 1139
- Joined: Thu Feb 15, 2007 1:00 am
- Location: Bristol, England, Earth, Perseus Gap, Milky Way
Debut Album 'Fantasy Bridge' available now!
Re: Logic X EVOC vocoder bounce in place?
Most likely you are feeding in audio to the evoc from the sidechain from an external track or source, so when you bounce in place which *just* bounces the selected instrument to a region, the sidechain is not present and thus you get no audio.
Do a bounce+reimport in the usual way by soloing the evoc track and bouncing from the output, where the whole mixer is active, and the sidechain will be running, and then bring the bounce back in to Logic.
Do a bounce+reimport in the usual way by soloing the evoc track and bouncing from the output, where the whole mixer is active, and the sidechain will be running, and then bring the bounce back in to Logic.
-
desmond - Jedi Poster
- Posts: 8392
- Joined: Tue Jan 10, 2006 1:00 am
Re: Logic X EVOC vocoder bounce in place?
Thanks Desmond. Obvious now you've explained it.
- MarkOne
- Frequent Poster
- Posts: 1139
- Joined: Thu Feb 15, 2007 1:00 am
- Location: Bristol, England, Earth, Perseus Gap, Milky Way
Debut Album 'Fantasy Bridge' available now!
Who is online
Users browsing this forum: No registered users