You are here

midiman midisport USB interface 4x4 and 2x2 - time to replace?

For anything relating to music-making on Windows computers, with lots of FAQs. Moderated by Martin Walker.

midiman midisport USB interface 4x4 and 2x2 - time to replace?

Postby thefruitfarmer » Thu Mar 14, 2019 7:58 pm

Hello

I have a midiman midisport 4x4 and 2x2, pre 2000.

Will they work under Windows 10?

Their website doesn't list them as products being supported

https://m-audio.com/kb/article/1882

It leads you to this driver,

https://m-audio.com/support/download/drivers/midisport-windows-driver-v6.1.3

which is the one I have been using but it now has stopped working. It did work in Reaper despite showing error messages but since scan computers sent round an engineer to replace the mobo on my new PC Reaper cannot see the two midi interfaces at all. Annoyingly, the input lights show when sending midi out from a synth but the midi goes no further.....

It would appear from searching google that this driver is not going to work for these products under W10.

The workarounds include using the windows midi drivers or a search for "m-audio W10 drivers midiman 4x4" reveals third party drivers....

Is it worth persevering with this?

NOt sure I trust third party drivers....

Maybe I shoud just get a new one? Any recommendations for a good 4x4 MIDI interface?

Thanks
User avatar
thefruitfarmer
Frequent Poster
Posts: 606
Joined: Wed Sep 01, 2004 12:00 am
Location: Kent UK

Re: midiman midisport USB interface 4x4 and 2x2 - time to replace?

Postby Music Wolf » Thu Mar 14, 2019 8:22 pm

I'm still using a 2x2 with W10. I'll have to dig around and see what driver I'm using.
User avatar
Music Wolf
Frequent Poster
Posts: 1580
Joined: Fri Feb 17, 2006 1:00 am
Location: Exiled to St Helens
 

Re: midiman midisport USB interface 4x4 and 2x2 - time to replace?

Postby tonemangler » Thu Mar 14, 2019 8:23 pm

Hi thefruitfarmer, I don't have an answer for you but the second link in your post shows that the v6.1.3 driver is compatible with Win 10, so technically it should work with your system. I use a midisport 2×2 under Win 7 and my new computer build will be Win 10, so I will be in a similar situation. I hope you can get them working.
tonemangler
Regular
Posts: 183
Joined: Wed Apr 23, 2003 12:00 am
Location: Toronto , Canada
"I'm hovering like a fly, waiting for the windshield on the freeway." Peter Gabriel

Re: midiman midisport USB interface 4x4 and 2x2 - time to replace?

Postby thefruitfarmer » Fri Mar 15, 2019 10:26 am

tonemangler wrote:Hi thefruitfarmer, I don't have an answer for you but the second link in your post shows that the v6.1.3 driver is compatible with Win 10, so technically it should work with your system. I use a midisport 2×2 under Win 7 and my new computer build will be Win 10, so I will be in a similar situation. I hope you can get them working.

That v6.1.3 driver will only work for the "Anniversary Editions" in W10, not the original midiman interfaces.
User avatar
thefruitfarmer
Frequent Poster
Posts: 606
Joined: Wed Sep 01, 2004 12:00 am
Location: Kent UK

Re: midiman midisport USB interface 4x4 and 2x2 - time to replace?

Postby thefruitfarmer » Fri Mar 15, 2019 10:28 am

Music Wolf wrote:I'm still using a 2x2 with W10. I'll have to dig around and see what driver I'm using.

If you can find me a working driver that would be much appreciated !
User avatar
thefruitfarmer
Frequent Poster
Posts: 606
Joined: Wed Sep 01, 2004 12:00 am
Location: Kent UK

Re: midiman midisport USB interface 4x4 and 2x2 - time to replace?

Postby Music Wolf » Fri Mar 15, 2019 11:40 am

I just checked and my Midiman has stopped working with latest update (although it was working previously with W10). It looks as though I may also be in the market for a new interface.
User avatar
Music Wolf
Frequent Poster
Posts: 1580
Joined: Fri Feb 17, 2006 1:00 am
Location: Exiled to St Helens
 

Re: midiman midisport USB interface 4x4 and 2x2 - time to replace?

Postby thefruitfarmer » Fri Mar 15, 2019 12:34 pm

Music Wolf wrote:I just checked and my Midiman has stopped working with latest update (although it was working previously with W10). It looks as though I may also be in the market for a new interface.

Mine only stopped working within the last week so it could be a W10 update.
User avatar
thefruitfarmer
Frequent Poster
Posts: 606
Joined: Wed Sep 01, 2004 12:00 am
Location: Kent UK

Re: midiman midisport USB interface 4x4 and 2x2 - time to replace?

Postby tonemangler » Fri Mar 15, 2019 8:54 pm

thefruitfarmer wrote:That v6.1.3 driver will only work for the "Anniversary Editions" in W10, not the original midiman interfaces.

That sucks. Out of curiosity did you try uninstalling the midiman driver and trying the generic windows 10 USB driver? The other option is to see if you can pick up an Anniversary Edition from somewhere. They still sell the 2×2 at the local music store here in Toronto for $79 Cdn, or maybe used? I will also be dealing with this issue once my new PC is built, so I would be interested if you find a solution. Good luck!
tonemangler
Regular
Posts: 183
Joined: Wed Apr 23, 2003 12:00 am
Location: Toronto , Canada
"I'm hovering like a fly, waiting for the windshield on the freeway." Peter Gabriel

Windows 10 Generic drivers

Postby thefruitfarmer » Sat Mar 16, 2019 7:30 am

tonemangler wrote:
thefruitfarmer wrote:That v6.1.3 driver will only work for the "Anniversary Editions" in W10, not the original midiman interfaces.

That sucks. Out of curiosity did you try uninstalling the midiman driver and trying the generic windows 10 USB driver? The other option is to see if you can pick up an Anniversary Edition from somewhere. They still sell the 2×2 at the local music store here in Toronto for $79 Cdn, or maybe used? I will also be dealing with this issue once my new PC is built, so I would be interested if you find a solution. Good luck!

I have not tried using the W10 generic driver yet but here is the link I found explaining how to do it:

https://getsatisfaction.com/m-audio/topics/midisport-2x2-and-4x4-not-detected-in-windows-10-preview-editions

To be honest I was hoping to find someone who has already done this so I am not walking untrodden ground but I may have a go over the weekend.
User avatar
thefruitfarmer
Frequent Poster
Posts: 606
Joined: Wed Sep 01, 2004 12:00 am
Location: Kent UK

Re: midiman midisport USB interface 4x4 and 2x2 - time to replace.

Postby thefruitfarmer » Sat Mar 16, 2019 9:26 am

I had a closer look at that thread

https://getsatisfaction.com/m-audio/topics/midisport-2x2-and-4x4-not-detected-in-windows-10-preview-editions

and it seems that the generic W10 drivers won't work with old midiman interfaces.

I have asked the question over there too but I will probably be ordering a new W10 class compliant MIDI interface over the next few days.
User avatar
thefruitfarmer
Frequent Poster
Posts: 606
Joined: Wed Sep 01, 2004 12:00 am
Location: Kent UK


Who is online

Users browsing this forum: No registered users