You are here

Hammond repair

Page 1 of 1

Hammond repair

PostPosted: Fri Feb 05, 2010 8:57 pm
by rozling
I have an L100 which is in need of repair. Anyone know of any keyboard techs in Ireland that could help me out?

I've brought parts over to the UK in the past but would prefer someone who can work on it locally...

Re: Hammond repair

PostPosted: Sat Feb 06, 2010 12:39 am
by . . . Delete This User . . .
there's a chap in North Wales, near prestatyn who's very good.... if he could get on as a foot passenger then the ferry to dublin wouldn't break the bank i suspect...


i'll have to struggle to remember his name (it was peter something or other i think.... ) i'll message an old colleague of mine who may remember..

(been a while since I had to have one repaired in North wales.... )

Re: Hammond repair

PostPosted: Sat Feb 06, 2010 9:31 am
by The Elf
I'd also like to know this guy. I have a T202 with a broken amp that needs some TLC. Image

Re: Hammond repair

PostPosted: Sat Feb 06, 2010 4:27 pm
by . . . Delete This User . . .
it appears he may have retired.... Peter Fawcett was his name, but my contacts haven't heard from him for about 7 or 8 years... i'm trying to acquire his number to see if it's the case or not....

Re: Hammond repair

PostPosted: Sun Feb 07, 2010 10:00 pm
by rozling
I must have notifications turned off - thanks a lot for the replies, really appreciate the help as I think it'll be a challenge to get this thing back in proper shape!

Re: Hammond repair

PostPosted: Mon Feb 08, 2010 1:01 am
by Hugh Robjohns
Any competent electronics technician with experience of valve amplifiers should be able to help. It's 1960s/1970s technology and the service manuals are easily available.

Hugh