You are here

the latest Behringer-gate

For fans of synths, pianos or keyboard instruments of any sort.

Re: the latest Behringer-gate

Postby Hugh Robjohns » Mon Jun 25, 2018 10:49 pm

Escapegoat wrote: That's wilfully being obtuse; there's no "honestly" about it.

This seems to be becoming unnecessarily 'antsy'....
User avatar
Hugh Robjohns
Moderator
Posts: 21957
Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: the latest Behringer-gate

Postby Escapegoat » Tue Jun 26, 2018 4:31 pm

Hugh Robjohns wrote:
Escapegoat wrote: That's wilfully being obtuse; there's no "honestly" about it.

This seems to be becoming unnecessarily 'antsy'....

Well, to me, being 'antsy' is more like threatening to sue forum members for voicing their honest opinions. ;)

But I'll desist. :)
Escapegoat
Regular
Posts: 132
Joined: Mon May 04, 2015 12:00 am

Re: the latest Behringer-gate

Postby Hugh Robjohns » Tue Jun 26, 2018 4:43 pm

Thank you. :thumbup:
User avatar
Hugh Robjohns
Moderator
Posts: 21957
Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: the latest Behringer-gate

Postby DGL. » Tue Nov 20, 2018 7:59 am

An update on the RD-909, again from a reliable source (well he does own the company) over at 'the other world',

10 tool made samples are ready and there is a lot of extra features that they have added to the sequencer, such as the ability to use it to modulate the filter and analogue designer.

Targeting (excl. tax and import charges (pertinent to our American viewers)):

$299!

Images courtesy of Uli Behringer @ Gearslutz

Image

Image
DGL.
Frequent Poster
Posts: 690
Joined: Fri Oct 28, 2011 12:00 am
Location: Portland, Dorset

Re: the latest Behringer-gate

Postby Dave B » Tue Nov 20, 2018 9:11 am

Yay! Just what the world needs! Another TR909 clone! :roll: :yawn:
User avatar
Dave B
Jedi Poster
Posts: 4745
Joined: Thu Apr 03, 2003 12:00 am
Location: Maidenhead
Veni, Vidi, Aesculi (I came, I saw, I conkered)

Re: the latest Behringer-gate

Postby resistorman » Tue Nov 20, 2018 5:25 pm

Dave B wrote:Yay! Just what the world needs! Another TR909 clone! :roll: :yawn:

:clap: :clap: :clap:
User avatar
resistorman
Frequent Poster
Posts: 591
Joined: Sun Nov 22, 2015 1:00 am
Location: Asheville NC
future26.com

Re: the latest Behringer-gate

Postby Eddy Deegan » Tue Nov 20, 2018 6:46 pm

Dave B wrote:Yay! Just what the world needs! Another TR909 clone! :roll: :yawn:
I know, I know but ... I'm still tempted :shh: ;)

... as much for nostalgia as anything else. I always loved the way the 909 felt to use and I'm certainly not paying for a real one obviously, so this could be quite a fun little gizmo actually.

I'll wait and see what the general impression is when they hit the streets first though.
User avatar
Eddy Deegan
Frequent Poster
Posts: 1006
Joined: Wed Sep 01, 2004 12:00 am
Location: Brighton & Hove, UK
The  man cave (currently unavailable while moving hosting providers) and some resulting works.

Re: the latest Behringer-gate

Postby DGL. » Tue Nov 20, 2018 7:06 pm

The fact that it is bloddy cheap will be the reason most people will buy it.
I have a Model D and it's fantastic, not cheap-feeling even in the slightest and whilst I have never touched a real Moog, it most certainly has the 'Mini Moog' sound and that is all that really matters.

Plus by adding features over and above the original it gets away from people simply calling them clones.
DGL.
Frequent Poster
Posts: 690
Joined: Fri Oct 28, 2011 12:00 am
Location: Portland, Dorset

Re: the latest Behringer-gate

Postby The Elf » Tue Nov 20, 2018 7:06 pm

I sold my TR-909 and 808 and replaced with a TR-8... that I grew to dislike. I'd certainly consider these clones for the times I need them (and they are still requested a heck of a lot from various clients).

Pity about the external PSU, but sub 300 quid I can forgive it.
User avatar
The Elf
Jedi Poster
Posts: 11583
Joined: Tue Aug 14, 2001 12:00 am
Location: Sheffield, UK
An Eagle for an Emperor, A Kestrel for a Knave.

Re: the latest Behringer-gate

Postby Dave B » Wed Nov 21, 2018 9:04 am

In that scenario, I'd actually be looking at the Roland (shock horror!!!) TR8S. I wasn't impressed by the original TR8, but the new S version seems to be a proper product. And they've even fixed it now so it stays in time!

:)
User avatar
Dave B
Jedi Poster
Posts: 4745
Joined: Thu Apr 03, 2003 12:00 am
Location: Maidenhead
Veni, Vidi, Aesculi (I came, I saw, I conkered)

Re: the latest Behringer-gate

Postby The Elf » Wed Nov 21, 2018 9:30 am

Yes, the TR-8S is a much better machine. I took a good look at SynthFest and I was impressed that Roland had addressed many of the issues with the TR-8, especially the lack of outputs, though I feel that the 8S is still a couple of outputs short.

Roland has been asked for recreations of its analogue gear for long enough, yet they seem to choose to ignore it. They had their chance.

Behringer's clones are analogue - and they're priced to move in big numbers (and have oodles of outputs). I'd say that they're going to sell like the proverbial cakes.
User avatar
The Elf
Jedi Poster
Posts: 11583
Joined: Tue Aug 14, 2001 12:00 am
Location: Sheffield, UK
An Eagle for an Emperor, A Kestrel for a Knave.

Re: the latest Behringer-gate

Postby Dave B » Wed Nov 21, 2018 11:43 am

Roland have (apparently) just rolled off two bumper years and have sold more than they have in the last couple of decades. They credit this to the boutique range. I should really have asked if this was just units sold or actual profit... But anyway, they seem happy with what they have so good luck to 'em.

But it does raise some interesting questions about the ability to produce actual analogue hardware. Behringer seem to have invested in this - as have Korg and lots of smaller companies - and are able to do it competitively which leaves me wondering why Roland and Yamaha haven't also.

Meh ... not my problem. I have lots of lovely proper analogue kit to play with at the moment so I'm fine ... :)
User avatar
Dave B
Jedi Poster
Posts: 4745
Joined: Thu Apr 03, 2003 12:00 am
Location: Maidenhead
Veni, Vidi, Aesculi (I came, I saw, I conkered)

Re: the latest Behringer-gate

Postby johnny h » Wed Nov 21, 2018 2:37 pm

Dave B wrote:Roland have (apparently) just rolled off two bumper years and have sold more than they have in the last couple of decades. They credit this to the boutique range. I should really have asked if this was just units sold or actual profit... But anyway, they seem happy with what they have so good luck to 'em.
The boutique range is very ironically named. They use the cheapest possible materials and they are all absolutely identical inside, just with different front panels. This is why the TR09 has tiny bunched up knobs. They haven't even bothered to put a proper balanced full sized output on them, and the hum from the USB power is absolutely awful. Of course they make money from them. They must cost virtually nothing to manufacture.
But it does raise some interesting questions about the ability to produce actual analogue hardware. Behringer seem to have invested in this - as have Korg and lots of smaller companies - and are able to do it competitively which leaves me wondering why Roland and Yamaha haven't also.
Yamaha and Roland ditched their analogue teams back in the 80s. Roland get Studio Electronics to make their Minimoog clone. Roland just do the badge and marketing. Yamaha have absolutely no respect for their analogue legacy. They sent all their GX1s to the scrap yard back in the 80s.
johnny h
Frequent Poster (Level2)
Posts: 3626
Joined: Mon Jul 24, 2006 12:00 am

Re: the latest Behringer-gate

Postby BillB » Wed Nov 21, 2018 4:31 pm

johnny h wrote:Yamaha and Roland ditched their analogue teams back in the 80s.
I doubt that it is an issue of missing expertise. Most decent hobbyists could pick up a Robert Penfold electronics book and put together an analogue synth, so it is well within the scope of these mighty corporations. They will have all of the circuit diagrams etc of their analogue classics, and the wherewithal to convert them into modern, lower-cost manufacturing processes (as Behringer / Korg / Sequential / others have done). It would appear to be more down to market choices.

As Elf said
Roland has been asked for recreations of its analogue gear for long enough, yet they seem to choose to ignore it. They had their chance.
Given that many of designs are out (or will be coming out) of copyright, meaning no option to protect past works, it does seem foolish to miss the opportunity that others have so clearly seen. Even to test the water, as Korg did with the Monotron - 8 years ago!
https://www.soundonsound.com/reviews/korg-monotron
BillB
Frequent Poster
Posts: 518
Joined: Mon Apr 07, 2003 12:00 am
Location: East Yorkshire

Re: the latest Behringer-gate

Postby BillB » Wed Nov 21, 2018 4:33 pm

Ooh, Ooh! SOS Posts = 500! Yay!
I aim for small, achievable targets in life :bouncy:
BillB
Frequent Poster
Posts: 518
Joined: Mon Apr 07, 2003 12:00 am
Location: East Yorkshire

Re: the latest Behringer-gate

Postby blinddrew » Wed Nov 21, 2018 5:12 pm

:clap: :clap: :clap:
User avatar
blinddrew
Jedi Poster
Posts: 5342
Joined: Sun Jul 05, 2015 12:00 am
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: the latest Behringer-gate

Postby The Elf » Wed Nov 21, 2018 6:51 pm

Dave B wrote:I have lots of lovely proper analogue kit to play with at the moment some of which I will be bringing along to the next SOS meet...
FTFY :wave:
User avatar
The Elf
Jedi Poster
Posts: 11583
Joined: Tue Aug 14, 2001 12:00 am
Location: Sheffield, UK
An Eagle for an Emperor, A Kestrel for a Knave.

Re: the latest Behringer-gate

Postby nathanscribe » Wed Nov 21, 2018 10:38 pm

The RD-909 looks good! I've been pondering the relative merits of the Behringer 808 thingummy versus the Roland TR-8s, given that I've already got the 909 and 606 covered. I'd always prefer analogue sounds to emulations, but the sampling side of the Roland might swing it. I've had a go with one for maybe 45 mins, and although it was fun I was not entirely convinced by the hats and cymbals to be honest.

I mean, finding actual examples of any of these machines is like *insert proverb of choice*. Just trying not to spend my money on something else in the meantime...
User avatar
nathanscribe
Frequent Poster
Posts: 975
Joined: Fri Jan 19, 2007 1:00 am
Location: Wakefield, for my sins.
I have no idea what I'm doing.

Re: the latest Behringer-gate

Postby johnny h » Thu Nov 22, 2018 1:13 pm

BillB wrote:They will have all of the circuit diagrams etc of their analogue classics, and the wherewithal to convert them into modern, lower-cost manufacturing processes (as Behringer / Korg / Sequential / others have done). It would appear to be more down to market choices.
Its not hard to make analogue synths, but they will never be cheaper to produce than a bargain basement DSP chip, mini-USB port and 3.5mm jack socket in a flimsy plastic case.
johnny h
Frequent Poster (Level2)
Posts: 3626
Joined: Mon Jul 24, 2006 12:00 am

Re: the latest Behringer-gate

Postby BillB » Thu Nov 22, 2018 3:03 pm

Agreed, Johnny, but cost, or more specifically cheapness, is only one element of a sales strategy. The Monotron only costs £30-40. Korg's recent new and old (mini-MS20) analogues are in a similar ball park to Roland's boutiques. I'm just suggesting that cost is probably not a barrier to Roland/Yamaha, nor is technical know-how. It seems to be more a case of attitude and the way that small decisions, to do / not do a market experiment, can influence their approach to the market.
All wild speculation, of course :headbang:

Maybe its not a bad thing. when the likes of Gordon Reid summarises the (4-voice polyphonic) SH-01a https://www.soundonsound.com/reviews/roland-sh-01a as:

The SH-01A does a remarkable job of emulating the SH-101, and then goes a lot further. The line between analogue and digital synthesis keeps getting narrower and, in the studio, I probably wouldn’t hesitate to use the SH-01A in place of the vintage synth. Whether I would take a module requiring micro-USB power and offering 3.5mm audio sockets on stage is another matter.

then actually our choices have increased, not decreased.
BillB
Frequent Poster
Posts: 518
Joined: Mon Apr 07, 2003 12:00 am
Location: East Yorkshire

PreviousNext

Who is online

Users browsing this forum: johnny h