You are here

the latest Behringer-gate

Page 66 of 80

Re: the latest Behringer-gate

PostPosted: Thu Feb 20, 2020 3:58 pm
by Hugh Robjohns
I'll name that forum in one... :roll: :headbang: :lol:

Re: the latest Behringer-gate

PostPosted: Thu Feb 20, 2020 11:39 pm
by Martin Walker
So will I :beamup: :crazy: :lolno:

Re: the latest Behringer-gate

PostPosted: Thu Feb 20, 2020 11:59 pm
by ConcertinaChap
N i g e l wrote:Beauty is in the eye of the beholder or for asprin tablets its the placebo effect.

Aye, we had some pain killers but the parrots et 'em all.

Image

CC

Re: the latest Behringer-gate

PostPosted: Fri Feb 21, 2020 12:19 am
by N i g e l
ba doum, tish !


The Elf wrote:"I don't care if the two files null, I can hear a difference."

you know when they clean a painting and find a masterpiece underneath ? Last time I nulled 2 files I found a version of John Cages 4-33

ba doum, tish.

Re: the latest Behringer-gate

PostPosted: Fri Feb 21, 2020 12:29 am
by The Elf
N i g e l wrote:ba doum, tish !


The Elf wrote:"I don't care if the two files null, I can hear a difference."

you know when they clean a painting and find a masterpiece underneath ? Last time I nulled 2 files I found a version of John Cages 4-33

ba doum, tish.
:clap:

Re: the latest Behringer-gate

PostPosted: Fri Feb 21, 2020 12:39 am
by desmond
N i g e l wrote:Last time I nulled 2 files I found a version of John Cages 4-33

Which version?

Re: the latest Behringer-gate

PostPosted: Fri Feb 21, 2020 1:27 pm
by ManFromGlass
I think nothing beats the LP version for warmth and, organic crackles

Re: the latest Behringer-gate

PostPosted: Mon Feb 24, 2020 1:56 pm
by Eddy Deegan
The same guy that did the deep dive comparing the Minimoog with the Berry D has put up another video doing the same but comparing the Minimoog (reissue) with the Poly D:

https://www.youtube.com/watch?v=f3dEAptsg_A

There are some differences - certainly more so than with the Model D - but it would seem they haven't done a bad job on the Poly D at all; quite the opposite. As with the other releases I'm treating the Poly D as an instrument in its own right rather than comparing it to an original device.

I'm looking forward to the Poly D turning up (I preordered one on the strength of the Model D clone) but as the Pro 1 arrived today my impatience-o-meter has been reset to "no hurry"!

Re: the latest Behringer-gate

PostPosted: Mon Feb 24, 2020 3:12 pm
by n o i s e f l e ur
You're making me envious Eddy, of all the Berry synths released so far nothing's tempted me as much as the Pro One.

However, I had a visit from the delivery man myself today so I can't feel too sorry for myself! Possibly more to follow on that subject, but this isn't the thread for it.

Re: the latest Behringer-gate

PostPosted: Mon Feb 24, 2020 3:31 pm
by The Elf
I'm hoping to get a shallow 19-inch rack made to hold all these goodies for my shallow self. Even as the owner of an original(s) a neat rack-mounted Pro One does have me salivating.

Re: the latest Behringer-gate

PostPosted: Mon Feb 24, 2020 4:00 pm
by Eddy Deegan
The Elf wrote:I'm hoping to get a shallow 19-inch rack made to hold all these goodies for my shallow self. Even as the owner of an original(s) a neat rack-mounted Pro One does have me salivating.

Should fit quite well... here it is propped against a 19" rack for comparison:

Image

Mine will be going into the Eurorack rig along with the Model D and Mother 32. It makes it less portable but a lot easier to patch and play about with in conjunction with everything else.

(also sexier and therefore better sounding, but that goes without saying)

Re: the latest Behringer-gate

PostPosted: Mon Feb 24, 2020 4:33 pm
by n o i s e f l e ur
That rackmount PC looks awfully familiar . . . looks to the right . . . yep! ;)

Re: the latest Behringer-gate

PostPosted: Mon Feb 24, 2020 6:35 pm
by The Elf
Any advice on a rack for my purposes gratefully received. I have a LOT of rack units to go in, so I'm looking at 20U plus - Model D, Neutron. Bro-One, MPG-70, new MKS-80 editor...

Re: the latest Behringer-gate

PostPosted: Fri Feb 28, 2020 6:19 pm
by DGL.
Well the TD-3 arrived today, Thomann had stock and at only £125 delivered you'd be stupid not to. The adaptor that Thomann ship with it seems good enough not to worry about getting the right plug insert for the adaptor, plus there is a screw that can be tightened to lock the PSU in to the adaptor.

Unexpectedly lightweight at less than 700g, you almost feel like there is nothing inside the box but the sound makes up for the weight.

Does feel sturdy though, knob feel is consistent and all the buttons have a nice click to them.
Could be easily run of a load of batteries in an external case as it inly comes with a 300ma PSU (TC Helicon/Electronics branded if that matters) so uses little power.

All in all feels like a decent product that could easily go for twice the price.

On another side not Thomann's UK website only show prices in pounds now and I can confirm that you get charged in pounds and not Euros, this is good as you then don't incur commission charges on the Euro-GBP conversion, price seems to be fixed vis-à-vis conversion rate and so at the moment buying it form Thomann UK is cheaper that buying it in Euros from their German site. Plus their free delivery amount is now £99 rather than ~£149 previously which is handy.

Re: the latest Behringer-gate

PostPosted: Fri Feb 28, 2020 6:46 pm
by The Elf
DGL. wrote:Well the TD-3 arrived today, Thomann had stock and at only £125 delivered you'd be stupid not to.
I managed to score a UK pre-order at £97. Although I have no love whatsoever for the TB-303, or any of its kind, I know a bargain when I see it! :lol: