You are here

A DIY Studio Desk build

Customising, building or repairing your own gear? Need help with acoustic treatment or soundproofing? Ask away…

A DIY Studio Desk build

Postby MarkOne » Mon Sep 10, 2018 3:35 pm

Not really electronics, but it is DIY. and design and in the studio.

I decided I really wanted a nice workstation desk, the likes of which you see from Argosy or StudioDesk. But there is no way I will ever afford the 4 figure sum on something gorgeous like that. So I decided to make one for myself. It may not be quite so gorgeous but there is a chance that it won't be too terrible either...

And then I thought it might be interesting for folks to see some of the build process, so I'm blogging some of the details.

If you are interested you can see the start of it here.

Part 1: http://www.markonemusic.co.uk/a-new-workstation-for-the-studio/

Part 2: http://www.markonemusic.co.uk/studio-desk-part-2-the-design/

Part 3: http://www.markonemusic.co.uk/studio-desk-part-3-building-the-frame/

More parts to follow...
MarkOne
Frequent Poster
Posts: 1199
Joined: Thu Feb 15, 2007 1:00 am
Location: Bristol, England, Earth, Perseus Gap, Milky Way
Debut Album 'Fantasy Bridge' available now!

Re: A DIY Studio Desk build

Postby blinddrew » Mon Sep 10, 2018 5:08 pm

I have workshop envy.
And by the looks of things i shall soon have desk envy as well.
User avatar
blinddrew
Jedi Poster
Posts: 10155
Joined: Sun Jul 05, 2015 12:00 am
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: A DIY Studio Desk build

Postby Martin Walker » Mon Sep 10, 2018 5:39 pm

Ooh, that DOES look good thus far MarkOne :thumbup:

And you taught me something I didn't know about - a digital protractor indeed :o


Martin
User avatar
Martin Walker
Moderator
Posts: 15597
Joined: Wed Jan 13, 2010 9:44 am
Location: Cornwall, UK

Re: A DIY Studio Desk build

Postby CS70 » Tue Sep 11, 2018 10:54 am

MarkOne wrote:I decided I really wanted a nice workstation desk, the likes of which you see from Argosy or StudioDesk. But there is no way I will ever afford the 4 figure sum on something gorgeous like that. So I decided to make one for myself. It may not be quite so gorgeous but there is a chance that it won't be too terrible either...

Woah really nice! Inspiring.
User avatar
CS70
Jedi Poster
Posts: 5277
Joined: Mon Nov 26, 2012 1:00 am
Location: Oslo, Norway
Silver Spoon - Check out our latest video and the FB page

Re: A DIY Studio Desk build

Postby ore_terra » Tue Sep 11, 2018 11:00 am

cool!
User avatar
ore_terra
Frequent Poster
Posts: 674
Joined: Fri Dec 02, 2016 1:56 pm
Location: Seville - Spain

Re: A DIY Studio Desk build

Postby Humble Bee » Tue Sep 11, 2018 3:31 pm

This looks great! Hope all goes well! Can't wait to see the next post!
:thumbup:
User avatar
Humble Bee
Regular
Posts: 302
Joined: Mon Jan 08, 2007 1:00 am
Location: Sweden

Re: A DIY Studio Desk build

Postby MarkOne » Wed Sep 12, 2018 1:33 pm

Hi Guys. Thanks for the comments!

Here is part 4: http://www.markonemusic.co.uk/studio-desk-part-4-the-legs/ (which I think many of you read already)

and part 5: http://www.markonemusic.co.uk/studio-desk-part-5-the-legs-and-frame-come-together/ where the legs and the frame finally come together.

Next up I'll show how the desktop sections were cut and fixed... Hopefully soon!
MarkOne
Frequent Poster
Posts: 1199
Joined: Thu Feb 15, 2007 1:00 am
Location: Bristol, England, Earth, Perseus Gap, Milky Way
Debut Album 'Fantasy Bridge' available now!

Re: A DIY Studio Desk build

Postby desmond » Wed Sep 12, 2018 1:47 pm

Very cool project!

But: Is it going to support the weight you need (as well as leaning on it in the middle..?)

Image

Most of those consoles have twin rack units underneath, so have much more support for the weight - I don't know if you are doing this, I couldn't see anything in the sketches you posted, but just from those legs alone, I'd be concerned about support in the middle. Maybe you're adding another couple of legs on the inside..?

Note: pretty much everything I learned about woodworking and construction I learnt from building skate ramps as a kid, so... :headbang:
User avatar
desmond
Jedi Poster
Posts: 9559
Joined: Tue Jan 10, 2006 1:00 am
mu:zines | music magazine archive | difficultAudio

Re: A DIY Studio Desk build

Postby MarkOne » Wed Sep 12, 2018 2:03 pm

Hi Desmond, thanks for the comment and the observation...

I hope that the final desktop will have the stiffness required. There is a cable management strip that will be about 100mm deep behind and under the back section that should add a lot of rigidity. Secondly I'm planning a 65mmx 30mm cross section solid oak wrist rest rail which will be jointed together to form a solid beam around the front of the desk and (assuming my joinery skills are up to it) will be a strong single component bolted all the way along the front!

But I do have a contingency plan of a pair of legs at the rear 15 degree angle break between each console section and the centre section. Aesthetically I'm hoping not to need them, so fingers crossed!
MarkOne
Frequent Poster
Posts: 1199
Joined: Thu Feb 15, 2007 1:00 am
Location: Bristol, England, Earth, Perseus Gap, Milky Way
Debut Album 'Fantasy Bridge' available now!

Re: A DIY Studio Desk build

Postby ore_terra » Wed Sep 12, 2018 2:54 pm

Would it lack stiffness when finished, you could get away with some slab like this between legs maybe

Image
User avatar
ore_terra
Frequent Poster
Posts: 674
Joined: Fri Dec 02, 2016 1:56 pm
Location: Seville - Spain

Re: A DIY Studio Desk build

Postby Music Wolf » Wed Sep 12, 2018 4:04 pm

I am very envious of;

The desk
Your Woodworking skills
Your workshop

:sick:
User avatar
Music Wolf
Frequent Poster
Posts: 1984
Joined: Fri Feb 17, 2006 1:00 am
Location: Exiled to St Helens

Re: A DIY Studio Desk build

Postby Martin Walker » Wed Sep 12, 2018 7:05 pm

Music Wolf wrote:I am very envious of;

The desk
Your Woodworking skills
Your workshop

Same here :mrgreen:


Martin
User avatar
Martin Walker
Moderator
Posts: 15597
Joined: Wed Jan 13, 2010 9:44 am
Location: Cornwall, UK

Re: A DIY Studio Desk build

Postby Matt Houghton » Wed Sep 12, 2018 7:49 pm

MarkOne wrote:Not really electronics, but it is DIY. and design and in the studio.

If memory serves right, the title of this forum was supposed to have been "DIY: ELECTRONICS & STUDIO DESIGN". But the colon got lost somewhere along the way. Inother words, your post is certainly in the right place!

Hope the desk build turns out well. It looks nice. I'd also be concerned about the lack of bracing/support in the middle — particularly when leaning on it, or moving the desk when full of gear. I guess it depends how much stuff you plan on putting on it...
Matt Houghton
Frequent Poster
Posts: 1002
Joined: Wed Aug 08, 2007 12:00 am
SOS Reviews Editor

Re: A DIY Studio Desk build

Postby Watchmaker » Wed Sep 12, 2018 8:51 pm

Ooooooooohhhhh! You've inspired me!

Like desmond, I am concerned about how this will carry weight, That's a rather large span for unreinforced spars. Maybe some surgical use of bare angle steel to carry the load off the joints to the legs?

I love the blog btw, nice work!
User avatar
Watchmaker
Frequent Poster
Posts: 757
Joined: Wed Apr 13, 2016 12:00 am
Location: Upstate NY, USA
Take my advice, I'm not using it.

Re: A DIY Studio Desk build

Postby blinddrew » Wed Sep 12, 2018 10:03 pm

Likewise. I'd be sticking some kind of triangulated frame at the back, even if it's not needed for outright strength, it will make it all feel much more solid.
User avatar
blinddrew
Jedi Poster
Posts: 10155
Joined: Sun Jul 05, 2015 12:00 am
Location: York
Ignore the post count, I have no idea what I'm doing...

Next