You are here

A DIY Studio Desk build

Customising, building or repairing your own gear? Need help with acoustic treatment or soundproofing? Ask away…

Re: A DIY Studio Desk build

Postby MarkOne » Mon Sep 17, 2018 1:20 pm

Over the weekend, progress was slower than I hoped.

I managed to construct the end panels for the desk and the console sections, and get all the edge veneering done.

Part 7. http://www.markonemusic.co.uk/studio-desk-part-7-end-panels/

With the help of Mrs One on varnishing duties I hope to have the desk more or less ready for final assembly later this week

This weekend I also acquired the oak for the front trim and got my brother-in-law to run the rough sawn stock through his whizzy thicknesser so that's ready for my attention too.

The end is in sight. I hope.
MarkOne
Frequent Poster
Posts: 1115
Joined: Thu Feb 15, 2007 12:00 am
Location: Bristol, England, Earth, Peruses Gap, Milky Way
Debut Album 'Fantasy Bridge' available now!

Re: A DIY Studio Desk build

Postby Martin Walker » Mon Sep 17, 2018 1:40 pm

MarkOne wrote:The end is in sight. I hope.

Yes, I can see it quite plainly MarkOne! ;)

And well done for co-opting your wife on varnishing duties :clap: :clap: :clap:

Will you be giving guided tours of this wonderful creation when it's finished?


Martin
User avatar
Martin Walker
Moderator
Posts: 12628
Joined: Wed Jan 13, 2010 8:44 am
Location: Cornwall, UK

Re: A DIY Studio Desk build

Postby Matt Houghton » Mon Sep 17, 2018 2:07 pm

Cool. Glad to hear that the design is working out and that the rigidity concerns were unfounded!
Matt Houghton
Frequent Poster
Posts: 914
Joined: Tue Aug 07, 2007 11:00 pm
SOS Reviews Editor

Re: A DIY Studio Desk build

Postby Watchmaker » Tue Sep 25, 2018 12:50 am

Outstanding. I hadn't thought you'd put a full panel on top like that. You could probably sleep on that when the in laws visit. Very nice looking veneer too.
User avatar
Watchmaker
Regular
Posts: 163
Joined: Tue Apr 12, 2016 11:00 pm
"one feels most reassured hearing an expert's opinions on the matter..."

Re: A DIY Studio Desk build

Postby MarkOne » Sun Sep 30, 2018 4:53 pm

Hi All, Been away on business all week to the far reaches of the planet - I was in Guangzhou china for a week long meeting, so progress is slow. But here are updates showing the wood finishing:

http://www.markonemusic.co.uk/studio-desk-part-8-finishing/

And then re-telling the rack rail disaster and it's final resolution.

http://www.markonemusic.co.uk/studio-desk-part-9-rack-rail-woes/

It's all starting to come together now. Unfortunately I have another week of business travel to an even more alien land (Paris!) so it will be another week before I get to get to grips with the final bits.
MarkOne
Frequent Poster
Posts: 1115
Joined: Thu Feb 15, 2007 12:00 am
Location: Bristol, England, Earth, Peruses Gap, Milky Way
Debut Album 'Fantasy Bridge' available now!

Re: A DIY Studio Desk build

Postby blinddrew » Sun Sep 30, 2018 5:13 pm

Looking really good, but, and I know we've covered this, I still worry about the lack of central support.
I'm just picturing a future scenario when you and a friend are in the room and, before you can warn him, he perches his @rse on the centre of the desk, and even 18mm of ply isn't a match for 85kg of weight applied at the point of maximum cantilever.
Your slow-motion dive and every-bodyguard-movie-ever-shout of, "Noooooooooo!" will echo out to everyone who's read this thread. In the middle of our regular lives and jobs we'll suddenly stop, and feel a terrible sadness; as if a cloud had passed across a bright sun and robbed it of all warmth.
The faint tinkle of your discarded coffee mug shattering as it hits the floor, and you collapse into a physically and metaphorically broken pile with your mate and the remains of your desk, will ring out like some strange and melancholy bell.

But I might be over-dramatising. :)
User avatar
blinddrew
Jedi Poster
Posts: 4901
Joined: Sat Jul 04, 2015 11:00 pm
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: A DIY Studio Desk build

Postby MarkOne » Mon Oct 01, 2018 8:10 am

LOL! I love your mind picture...

I don't really know want to say other than... "Airplane Wings"

The aluminium covering a commercial airliner can be typically as thin as 1mm. That's pretty thin and bendy. Luckily, that skin is fixed securely to a substructure, and the overall final structure is more than strong enough to haul, you, me and 200 other people, enough gin and tonic to keep us all happy, some duty free and 70,000 Kg of jet fuel aloft.

Now my desk isn't exactly a work of aeronautical engineering, but it's not a single 17mm thickness of MDF. The subframe is made up from 34mm square softwood which is screwed and glued together to form a matrix. The top is then fixed to this frame at multiple points. Then finally an oak edge 20mm thick and 100 mm deep is going to be fixed to the front.

There is a handy calculator on-line that you can put in thickness and length for various materials. (http://www.woodbin.com/calcs/sagulator/) And if you take a simple single 2m length of 17mm MDF 20cm wide supported at both ends and plop 100kg right in the middle. the deflection would indeed be a worrying 11.6cm!!! but now if you add a strip of solid oak to the front edge alone that is 10x2.2cm creating a simple L shape structure, the deflection goes down to a mere 1.1mm

Given I have the subframe and the edge strip I'm pretty confident that the final article will be friend-ar$e proof :)
MarkOne
Frequent Poster
Posts: 1115
Joined: Thu Feb 15, 2007 12:00 am
Location: Bristol, England, Earth, Peruses Gap, Milky Way
Debut Album 'Fantasy Bridge' available now!

Re: A DIY Studio Desk build

Postby blinddrew » Mon Oct 01, 2018 1:59 pm

Ah, that oak front panel is reassuring. I'm sure you know what you're doing. :)
It's, ahem, at least 20 years (probably 25) since I looked at pin jointed frames and cantilevered loads. :)
User avatar
blinddrew
Jedi Poster
Posts: 4901
Joined: Sat Jul 04, 2015 11:00 pm
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: A DIY Studio Desk build

Postby MarkOne » Mon Oct 08, 2018 11:52 am

Back from Paris, and a whole weekend at home to work on the desk.

Here is the front trim construction, fixing and finish.
http://www.markonemusic.co.uk/studio-desk-part-10-the-oak-front-trim/

This entry concludes the actual desk construction phase. I still have to sort out things like cable management, power strips, an integrated USB hub, and then installation of the rack kit. So there may be another entry along in the not too distant future.

I am really happy with the way it's turned out and I'm looking forward to getting this thing fully operational soon :)

Image
MarkOne
Frequent Poster
Posts: 1115
Joined: Thu Feb 15, 2007 12:00 am
Location: Bristol, England, Earth, Peruses Gap, Milky Way
Debut Album 'Fantasy Bridge' available now!

Re: A DIY Studio Desk build

Postby Humble Bee » Mon Oct 08, 2018 1:04 pm

Top class Mark!
Jealous me! :thumbup:
User avatar
Humble Bee
Regular
Posts: 101
Joined: Mon Jan 08, 2007 12:00 am
Location: Switzerland/Germany/Sweden

Re: A DIY Studio Desk build

Postby ManFromGlass » Mon Oct 08, 2018 1:21 pm

I have a great admiration of anybody with patience and the gift of fine woodworking.
I'm also impressed with the fibre optics lamp! I see you have superb taste in accent lighting.
User avatar
ManFromGlass
Frequent Poster
Posts: 1444
Joined: Sat Jul 23, 2011 11:00 pm
Location: In the woods in Canada
 

Re: A DIY Studio Desk build

Postby Martin Walker » Mon Oct 08, 2018 3:13 pm

Hi MarkOne!

Wow - this is looking most scrumptious! 8-)

Looking forward to seeing those racks filled and the desktop-based gear in place.

Wonderful work! :clap:


Martin
User avatar
Martin Walker
Moderator
Posts: 12628
Joined: Wed Jan 13, 2010 8:44 am
Location: Cornwall, UK

Re: A DIY Studio Desk build

Postby desmond » Mon Oct 08, 2018 3:28 pm

Great job! :clap:
User avatar
desmond
Jedi Poster
Posts: 8096
Joined: Tue Jan 10, 2006 12:00 am

Re: A DIY Studio Desk build

Postby blinddrew » Mon Oct 08, 2018 9:16 pm

Good work sir! :clap:
User avatar
blinddrew
Jedi Poster
Posts: 4901
Joined: Sat Jul 04, 2015 11:00 pm
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: A DIY Studio Desk build

Postby Luke W » Tue Oct 09, 2018 8:41 am

Nice work, the black finish looks very tidy. :thumbup:
User avatar
Luke W
Regular
Posts: 107
Joined: Thu Feb 19, 2009 12:00 am
Location: Northamptonshire, UK
Techie/Musician Of Sorts
 

Re: A DIY Studio Desk build

Postby Music Wolf » Tue Oct 09, 2018 10:20 am

Looking very nice there.

I will be very interested to hear how the ergonomics work for you once it's all complete. I would one day like to do something very similar (although I'm not even going to pretend that I'll be capable to get the same finish) so it will be good to know whether things like the installation angle of the rack units work or whether you'd do it differently next time.
User avatar
Music Wolf
Frequent Poster
Posts: 1471
Joined: Fri Feb 17, 2006 12:00 am
Location: Exiled to St Helens
 

Previous

Who is online

Users browsing this forum: No registered users