Re: Garden timber studio - walls
Posted: Mon Dec 10, 2018 1:24 am
James Perrett wrote:jmch wrote:Can anyone recommend how I can push this door tight without obstructing emergency access from the outside?
In my current studio I just rely on the pressure exerted by the door closers. However, in my last studio I had magnetic sealing strips all around the door (a bit like fridge seals).jmch wrote:Then there's the issue of covering gaps (sides, top and bottom) between this inner door and the solid composite door that's going on the outside leaf. This door comes with its own frame and airtight seals.
Can anyone suggest any other method of closing these gaps?
As long as you don't couple the two leaves together you can use whatever you like. I've just wedged some spare acoustic foam in the gap between the control room and booth while I deliberately widened the gap between the outer and inner entrance doors to allow me to put a computer in there.
Thanks for the suggestions James.
I've put a link to some photos of the inner door frame so far, that also show the gap I'm talking about.