You are here

Pole mount cup for EV Eliminator I Speaker?

Customising, building or repairing your own gear? Need help with acoustic treatment or soundproofing? Ask away…

Pole mount cup for EV Eliminator I Speaker?

Postby mikehende » Thu Jun 25, 2020 3:52 pm

Hey guys, I had contacted EV this morning for this but they no longer carry this part for this speaker: https://av.loyola.com/products/audio/ev ... tor-i.html

Since I will need to go with a replacement I am not sure of the sizing or material to look for. I am seeing this but not sure if it will work?

https://www.parts-express.com/cat/speak ... ckets/3462

Can anyone tell me which one of these will work for my speaker please if this is the right part? the description is showing as "top hat" so I am not not sure.
mikehende
Regular
Posts: 228
Joined: Mon Oct 02, 2017 5:02 pm

Re: Pole mount cup for EV Eliminator I Speaker?

Postby resistorman » Thu Jun 25, 2020 5:47 pm

If you look at the Architect specifications in the product pdf, you’ll see this:

“The system shall include a 1 3/8-in. stand-mount adapter.”

That’s good because it’s a very standard size. So any of the 1 3/8” adapters at that parts express link that will fit into the hole and mount securely will work. If the adapter is still around, or you have one in another EV speaker, take it out and measure it.
User avatar
resistorman
Frequent Poster
Posts: 916
Joined: Sun Nov 22, 2015 1:00 am
Location: Asheville NC

Re: Pole mount cup for EV Eliminator I Speaker?

Postby mikehende » Thu Jun 25, 2020 5:50 pm

Yeah I called up Parts Express a few minutes ago and the tech said for me to measure the depth in that hole under the cab to get an idea.
mikehende
Regular
Posts: 228
Joined: Mon Oct 02, 2017 5:02 pm