You are here

Doepfer Dark Time dimensions

Customising, building or repairing your own gear? Need help with acoustic treatment or soundproofing? Ask away…

Doepfer Dark Time dimensions

Postby Durr GaGa » Sun Nov 15, 2020 6:22 pm

Hi folks,

I am getting a Doepfer Dark Time sequencer for Christmas this year but won't be allowed to see or touch it until Christmas day - which is fair enough to be honest!!

However, I am going to convert the unit into a 'rack mounted' sequencer and I want to make a start on the fabrication of the box for it in advance and to do that, I need accurate measurements for the metal box (excluding the wooden sides). Doepfer do give this measurement in their specification data but they preface the measurements with the dreaded word 'about'.

I would be very much obliged if any existing owner would be kind enough to take a set of accurate metric measurements for me of the depth, width and height of the metal box portion.

Many thanks in advance.
User avatar
Durr GaGa
Regular
Posts: 67
Joined: Tue Jun 19, 2018 4:12 pm

Regards,

Steve
www.nightskyimages.co.uk

Re: Doepfer Dark Time dimensions - Resolved

Postby Durr GaGa » Sun Nov 22, 2020 9:06 am

Resolved
User avatar
Durr GaGa
Regular
Posts: 67
Joined: Tue Jun 19, 2018 4:12 pm

Regards,

Steve
www.nightskyimages.co.uk

Re: Doepfer Dark Time dimensions - Resolved

Postby Arpangel » Sun Nov 22, 2020 9:27 am

Durr GaGa wrote:Resolved

Good, you’ve got a lot of fun coming, I’m adding this to my Christmas list too.

:thumbup:
User avatar
Arpangel
Jedi Poster
Posts: 5777
Joined: Fri Jul 11, 2003 11:00 pm