I am getting a Doepfer Dark Time sequencer for Christmas this year but won't be allowed to see or touch it until Christmas day - which is fair enough to be honest!!
However, I am going to convert the unit into a 'rack mounted' sequencer and I want to make a start on the fabrication of the box for it in advance and to do that, I need accurate measurements for the metal box (excluding the wooden sides). Doepfer do give this measurement in their specification data but they preface the measurements with the dreaded word 'about'.
I would be very much obliged if any existing owner would be kind enough to take a set of accurate metric measurements for me of the depth, width and height of the metal box portion.
Many thanks in advance.
You are here
Doepfer Dark Time dimensions
Customising, building or repairing your own gear? Need help with acoustic treatment or soundproofing? Ask away…
4 posts • Page 1 of 1
Arpangel wrote:Durr GaGa wrote:Resolved
Good, you’ve got a lot of fun coming, I’m adding this to my Christmas list too.
Not too long to go now and I have my fingers seriously crossed that I am in luck as it really does appear to be a really nice device - I hope we are both lucky!
- Posts: 71
- Joined: Tue Jun 19, 2018 5:12 pm