You are here

My sub need a x-over

For performing musicians and engineers: stagecraft, engineering and gear.

My sub need a x-over

Postby gsc1ugs » Sat Oct 12, 2019 3:16 pm

I use the dxr15 thru output and go into my sr technology 18sub, will my sub sort out that signal?
gsc1ugs
Regular
Posts: 272
Joined: Thu Oct 18, 2018 12:08 pm

Re: My sub need a x-over

Postby Music Wolf » Sat Oct 12, 2019 4:27 pm

I couldn't find a spec or manual for that sub online but the normal way to do it would be;

Mixer > Sub (in) > Sub (through) > DXR15 (in).

If the sub has a high pass throughput then use that. If only a full range then set the high pass filter (HPR) on the DXR to either 100Hz or 120Hz, whichever sounds best.
User avatar
Music Wolf
Frequent Poster
Posts: 1777
Joined: Fri Feb 17, 2006 1:00 am
Location: Exiled to St Helens

Re: My sub need a x-over

Postby gsc1ugs » Sun Oct 13, 2019 9:09 am

gsc1ugs
Regular
Posts: 272
Joined: Thu Oct 18, 2018 12:08 pm

Re: My sub need a x-over

Postby Hugh Robjohns » Sun Oct 13, 2019 9:21 am

Poor quality image, but it looks to me like it has high-pass outputs for feeding the main speakers.

So desk > sub > high-pass outputs > Speakers.

H
User avatar
Hugh Robjohns
Moderator
Posts: 24867
Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: My sub need a x-over

Postby gsc1ugs » Sun Oct 13, 2019 1:00 pm

Thxs will try it out, still run dxr15 FOH?
gsc1ugs
Regular
Posts: 272
Joined: Thu Oct 18, 2018 12:08 pm


Who is online

Users browsing this forum: No registered users