You are here

Beamz MHL90 Moving Head

For performing musicians and engineers: stagecraft, engineering and gear.

Beamz MHL90 Moving Head

Postby lucylucy87 » Tue Dec 03, 2019 9:48 pm

Could anyone help me? :roll: :roll:

I bought this new head.
today I tried it and it works well. then it seems to have stopped by itself.
is there any procedure I can do to unlock it?

Image
lucylucy87
Posts: 2
Joined: Tue Dec 03, 2019 9:39 pm

Re: Beamz MHL90 Moving Head

Postby blinddrew » Tue Dec 03, 2019 10:47 pm

There is a reset option at the bottom of page 9 of the manual: http://files.tronios.com/Manuals/150.530%7CManual.pdf
Start there if you haven't already. I assume it's not giving any error message on the display?
User avatar
blinddrew
Jedi Poster
Posts: 8509
Joined: Sun Jul 05, 2015 12:00 am
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: Beamz MHL90 Moving Head

Postby lucylucy87 » Tue Dec 03, 2019 10:52 pm

blinddrew wrote:There is a reset option at the bottom of page 9 of the manual: http://files.tronios.com/Manuals/150.530%7CManual.pdf
Start there if you haven't already. I assume it's not giving any error message on the display?

I tried to do it.
that reset only serves to restore the setting of the changed values.
seems to be blocked.
does not go auotomatically. there is no light. :oops:
Do you need any "Hard Reset" procedure if it exists?
or they will have to replace my machine. Very strange, in test mode it works.
lucylucy87
Posts: 2
Joined: Tue Dec 03, 2019 9:39 pm

Re: Beamz MHL90 Moving Head

Postby Hugh Robjohns » Tue Dec 03, 2019 11:08 pm

Your image shows the message 'cnos' in the display... But I can't see any mention of that in the manual. It may be an error code. I would suggest contacting the manufacturer for advice and assistance.
User avatar
Hugh Robjohns
Moderator
Posts: 25045
Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: Beamz MHL90 Moving Head

Postby blinddrew » Tue Dec 03, 2019 11:51 pm

I'm with Hugh, given the lack of any mention of factory resets on a quick search I think you're left with getting in touch with the maker or retailer.
User avatar
blinddrew
Jedi Poster
Posts: 8509
Joined: Sun Jul 05, 2015 12:00 am
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: Beamz MHL90 Moving Head

Postby Wonks » Wed Dec 04, 2019 9:48 am

Beamz/Tronios website. https://www.tronios.com/

It's almost identical to a unit I bought a while ago and is undoubtedly a badged generic Chinese product, but they should be able to help you.
User avatar
Wonks
Jedi Poster
Posts: 10143
Joined: Thu May 29, 2003 12:00 am
Location: Reading, UK
Correcting mistakes on the internet since 1853


Who is online

Users browsing this forum: No registered users