You are here

Behringer X32 Mono Out for Second Speakers

For performing musicians and engineers: stagecraft, engineering and gear.

Behringer X32 Mono Out for Second Speakers

Postby TimCarpenter » Thu Nov 19, 2020 5:08 am

Our church just purchased a Behringer x32 as our first digital board after a Mackie VLZ2404 Analog board. Big learning curve.

We have Bose Panarays in the front of house and then smaller Bose speakers about mid way back (delayed after the board and before the amp). I'm trying to sort out how to get a second main out (could be mono for this purpose) where I can control the level of the speakers that are midway back yet the overall volume is controlled by the main fader.

Can someone provide some guidance?
TimCarpenter
New here
Posts: 7
Joined: Thu Nov 19, 2020 5:03 am

Re: Behringer X32 Mono Out for Second Speakers

Postby AlecSp » Thu Nov 19, 2020 11:51 am

Welcome to the world of matrix outputs - rarely found on small analog desks, but much more common in the digital world, and often overlooked.

Very well described for exactly the purpose you're after here
AlecSp
Regular
Posts: 476
Joined: Tue Nov 16, 2004 1:00 am

Re: Behringer X32 Mono Out for Second Speakers

Postby TimCarpenter » Thu Nov 19, 2020 2:24 pm

Excellent! Just what I needed. Thanks!
TimCarpenter
New here
Posts: 7
Joined: Thu Nov 19, 2020 5:03 am