Search form

[Rich Hanson]

Well, as bought, it was. As modified, it's probably a bit better than one. Though you'd never knock a nail in with it. :D

Challenge accepted :-D

[ManFromGlass]

Great stuff, Mr. Wonks!
Will it survive immersion in a half pint of beer? (This is not a dare :headbang: )

[Wonks]

That's a waste of half a pint of good beer!

[blinddrew]

Doesn't have to be good beer, you can use Carling for testing purposes.

[Wonks]

There are limits to what I will buy!

[Wonks]

Errata: I've just realised I'd got the XLR pinout wrong, and had pins 2 and 3 crossed over in the photo-mark-up and text. So the red wire does go to pin 2 and the black wire to pin 3.

Sorry chaps.

[Hugh Robjohns]

Doh! I should have spotted that -- pin 3 is always the one in the middle on an XLR! :headbang: So that makes much more sense -- black as the cold side and red as the hot. :-)

H

[Wonks]

Though Shure use red and blue, with blue to pin 2 (+) and red to pin 3 (-).