You are here

Zoom TAC-2 and new iMac 2017

All about the tools and techniques involved in capturing sound, in the studio or on location.

Re: Zoom TAC-2 and new iMac 2017

Postby RevitalRecords » Thu Dec 06, 2018 12:47 am

Hey you all!

I am absolutely frustrated. Been trying for hours, following all kind of tips and leads.
Installed, uninstalled & reinstalled the last driver. Updated the TAC-2R firmware...

Also did the cable plug one by one thing. No way.

It still does not work.
My TBolt does not recognize anything connected.

The Zoom works, because I tested it myself in other computer.

This one is a MacBook Pro 2018 High Sierra 10.13.4

Please, help! & Thanks a lot in advance....
RevitalRecords
Posts: 1
Joined: Thu Dec 06, 2018 12:35 am

Re: Zoom TAC-2 and new iMac 2017

Postby ConcertinaChap » Thu Dec 06, 2018 7:04 am

G-Doubleyou wrote:Under the Apple menu/ About this Mac/ System Report, check under Thunderbolt.
Does your machine detect and identify the device.

What's the result of doing this? If you can't see the device then it's probably a hardware rather than a driver problem.

CC
User avatar
ConcertinaChap
Jedi Poster
Posts: 7373
Joined: Wed Jul 20, 2005 12:00 am
Location: Bradford on Avon
Making music: Eagle Alley, recording music: Mr Punch's Studio
A small fish in a small pond.

Re: Zoom TAC-2 and new iMac 2017

Postby Xyntec » Sun Jul 21, 2019 12:21 pm

After messing around for almost an hour I just discovered the solution (and that's the reason I just registered on this forum). :D

After installing the drivers you need to head over to the security settings (System options --> Security), and click on the button that says "allow". Check the entry "Zoom Cooperation" and grant access. Now restart your mac and the Tac 2R should be recognized by the system. Hopefully this works for you guys as well :)
Xyntec
Posts: 1
Joined: Sun Jul 21, 2019 12:15 pm


Who is online

Users browsing this forum: No registered users