You are here

Old Roland Jupiter 8 restoration

Customising, building or repairing your own gear? Need help with acoustic treatment or soundproofing? Ask away…

Re: Old Roland Jupiter 8 restoration

Postby Jumpeyspyder » Wed Oct 24, 2018 1:43 am

Some progress !!

https://jup8restoration.wordpress.com/2018/09/26/finally-new-powder-coating-success-for-cora/

Looks like darren is bouncing back - hope he'll be back here again soon :)
User avatar
Jumpeyspyder
Frequent Poster
Posts: 1116
Joined: Fri Jan 20, 2006 1:00 am
Location: Yorkshire

Re: Old Roland Jupiter 8 restoration

Postby Dan LB » Wed Oct 24, 2018 2:15 am

:clap: delighted to see this moving forward again. Well done Darren. Looking forward to seeing the decal printing process.

Dan
User avatar
Dan LB
Frequent Poster
Posts: 1304
Joined: Sat Jan 28, 2006 1:00 am
Location: Wicklow, Ireland

Re: Old Roland Jupiter 8 restoration

Postby Folderol » Wed Oct 24, 2018 8:38 am

Really, really pleased to see this. I was quite angry when I read what had been done by the numpties previously. :thumbup:
User avatar
Folderol
Jedi Poster
Posts: 8761
Joined: Sat Nov 15, 2008 1:00 am
Location: The Mudway Towns, UK
Yes. I am that Linux nut.
Onwards and... err... sideways!

Re: Old Roland Jupiter 8 restoration

Postby The Elf » Wed Oct 24, 2018 8:47 am

+1 This is a 'do the right thing' story and it is fascinating to watch it unfold. I am crossing my fingers for him.
User avatar
The Elf
Jedi Poster
Posts: 12563
Joined: Tue Aug 14, 2001 12:00 am
Location: Sheffield, UK
An Eagle for an Emperor, A Kestrel for a Knave.

Re: Old Roland Jupiter 8 restoration

Postby Martin Walker » Wed Oct 24, 2018 4:52 pm

That looks stunning! (finally ;) )

What a labour of love though :headbang:

Hope the next stages go far more smoothly :thumbup:


Martin
User avatar
Martin Walker
Moderator
Posts: 14239
Joined: Wed Jan 13, 2010 9:44 am
Location: Cornwall, UK

Re: Old Roland Jupiter 8 restoration

Postby DarrenGlen » Fri Oct 26, 2018 10:52 am

Thanks everyone for your comments ! Yep next post is about decal file finalizing .. specifically alignment testing...and I’ve convinced Jeff from Custom Synths that we should share the decal file with the world as well so there will be download!!!

Cheers !
DarrenGlen
Poster
Posts: 27
Joined: Thu Feb 08, 2018 12:54 am

Re: Old Roland Jupiter 8 restoration

Postby Folderol » Fri Oct 26, 2018 12:54 pm

That's very good of you - not many people would do that :thumbup: :clap:
User avatar
Folderol
Jedi Poster
Posts: 8761
Joined: Sat Nov 15, 2008 1:00 am
Location: The Mudway Towns, UK
Yes. I am that Linux nut.
Onwards and... err... sideways!

Re: Old Roland Jupiter 8 restoration

Postby The Elf » Fri Oct 26, 2018 2:27 pm

This thread gets better every time! Good for you, mate. :thumbup:
User avatar
The Elf
Jedi Poster
Posts: 12563
Joined: Tue Aug 14, 2001 12:00 am
Location: Sheffield, UK
An Eagle for an Emperor, A Kestrel for a Knave.

Re: Old Roland Jupiter 8 restoration

Postby Martin Walker » Sat Oct 27, 2018 12:31 am

Hear hear! :clap:
User avatar
Martin Walker
Moderator
Posts: 14239
Joined: Wed Jan 13, 2010 9:44 am
Location: Cornwall, UK

Re: Old Roland Jupiter 8 restoration

Postby minime123 » Sun Nov 25, 2018 6:25 pm

great blog, though way too long for me to read right now considering i just discovered it so haven't read it in installments. looking forward to the decal part, please post soon! we have a jp8 in the closet that we're going to give a full facelift to once we find local shops that we trust to do this work. (we will be testing them out with lesser instruments like Star Instruments Synare 3s before we send them stuff of greater importance and higher value).
Mini
User avatar
minime123
Regular
Posts: 56
Joined: Thu Aug 31, 2006 12:00 am
Location: USA
Vintage Synth Dealer
https://tonetweakers.com/

Re: Old Roland Jupiter 8 restoration

Postby DarrenGlen » Fri Dec 07, 2018 2:45 am

Hi all, the latest post is up! This one is a biggie, it contains download files of the Jupiter 8 panel artwork!! Which can be used to re-screen print the panel decal if yours is scratched or rusted.

You can also now talk to Cora! She has her own Facebook group! She enjoys hearing your positive support during her progress and answers questions !

https://www.facebook.com/groups/359832781432431/

Enjoy!

Cheers,
Darren
DarrenGlen
Poster
Posts: 27
Joined: Thu Feb 08, 2018 12:54 am

Re: Old Roland Jupiter 8 restoration

Postby Hugh Robjohns » Fri Dec 07, 2018 10:55 am

Nice Work!
User avatar
Hugh Robjohns
Moderator
Posts: 24329
Joined: Fri Jul 25, 2003 12:00 am
Location: Worcestershire, UK
Technical Editor, Sound On Sound

Re: Old Roland Jupiter 8 restoration

Postby Folderol » Fri Dec 07, 2018 11:17 am

I wish you hadn't used facebook - I never go there :(
User avatar
Folderol
Jedi Poster
Posts: 8761
Joined: Sat Nov 15, 2008 1:00 am
Location: The Mudway Towns, UK
Yes. I am that Linux nut.
Onwards and... err... sideways!

Re: Old Roland Jupiter 8 restoration

Postby The Elf » Fri Dec 07, 2018 11:24 am

I loathe Facebook, but at least Darren is giving us prompts here on the forum.

Great progress! :clap: Keep up this fascinating work!
User avatar
The Elf
Jedi Poster
Posts: 12563
Joined: Tue Aug 14, 2001 12:00 am
Location: Sheffield, UK
An Eagle for an Emperor, A Kestrel for a Knave.

Re: Old Roland Jupiter 8 restoration

Postby Martin Walker » Fri Dec 07, 2018 2:43 pm

I've joined the Cora Facebook group, and therefore seem to be the odd one out :beamup:


Martin
User avatar
Martin Walker
Moderator
Posts: 14239
Joined: Wed Jan 13, 2010 9:44 am
Location: Cornwall, UK

Re: Old Roland Jupiter 8 restoration

Postby Sam Spoons » Fri Dec 07, 2018 4:27 pm

You're not quite alone on there MW, I haven't joined Cora's group yet (my excuse is I'm a guitar player really) but I do use fb and while there is a lot of dross and far too many adverts I find it useful.
User avatar
Sam Spoons
Jedi Poster
Posts: 10013
Joined: Thu Jan 23, 2003 1:00 am
Location: Manchester UK
Finally taking this recording lark seriously (and recording my Gypsy Jazz CD)........

Re: Old Roland Jupiter 8 restoration

Postby desmond » Fri Dec 07, 2018 4:46 pm

Note: If you edit the dropbox links to be "dl=1" instead of "dl=0", they'll be directly downloadable, rather than forcing the user to go to the dropbox page, and figure out how to download from there... :thumbup:
User avatar
desmond
Jedi Poster
Posts: 8818
Joined: Tue Jan 10, 2006 1:00 am

Re: Old Roland Jupiter 8 restoration

Postby BigRedX » Fri Dec 07, 2018 7:34 pm

DarrenGlen wrote:Hi all, the latest post is up! This one is a biggie, it contains download files of the Jupiter 8 panel artwork!! Which can be used to re-screen print the panel decal if yours is scratched or rusted.

Enjoy!

Cheers,
Darren

As someone who creates print artwork for a living mostly doing things that are similar in concept to your JP8 graphics, I think you did make the job more difficult than it needed to be, but at least you got test prints done and were able to tweak your artwork to get an ultimately proper fit.

However I did wonder why you didn't use the CAD drawing of the panels that you created when it looked as though you were going to have get the top panel remade after the powder coating disaster, as your starting point and the photographs just for reference?
User avatar
BigRedX
Frequent Poster
Posts: 688
Joined: Fri Sep 03, 2004 12:00 am
RockinRollin' VampireMan

Re: Old Roland Jupiter 8 restoration

Postby BJG145 » Fri Dec 07, 2018 8:13 pm

DarrenGlen wrote:You can also now talk to Cora! She has her own Facebook group! She enjoys hearing your positive support during her progress and answers questions !

O...K...

We've clearly moved on from cats and dogs. Glad to have caught up. ;)
User avatar
BJG145
Frequent Poster (Level2)
Posts: 3784
Joined: Sat Aug 06, 2005 12:00 am

Re: Old Roland Jupiter 8 restoration

Postby DarrenGlen » Sat Dec 08, 2018 12:08 am

BigRedX wrote:
However I did wonder why you didn't use the CAD drawing of the panels that you created when it looked as though you were going to have get the top panel remade after the powder coating disaster, as your starting point and the photographs just for reference?

Fair question....
Because
A/i don’t own AutoCad or know how to use it, I only know how to bluff my way clumsily through Coreldraw
And
B/ a friend in the UK is doing the Top panel cad file for free for me after reading Cora’s sad plight he offered to help because he felt my pain. I’m just sending him pictures (hundreds of them) with digital calipers across every part of Cora and he’s doing the cad in his spare time!

The laser recut of the top panel may never happen if the original one turns out successfully im just keeping all options on the table at this point !

Cheers!
DarrenGlen
Poster
Posts: 27
Joined: Thu Feb 08, 2018 12:54 am

Next

Who is online

Users browsing this forum: The Coastal Path