You are here

Tascam US 20x20 interface!!!

All about the tools and techniques involved in capturing sound, in the studio or on location.

Tascam US 20x20 interface!!!

Postby pyaar » Wed Jan 09, 2019 6:15 am

Hi
Wonder if anyone here owns this interface and tried to figure it out:
I have a Tascam US 20x20 interface, and I'd like to see how can I route the headphone jacks so I'd be able to send different mix setting to each jack. I could do these settings with older interfaces I had in the past, but here from some reason I can't find how to tweak it, I tried to find it in the user manual, no luck - any thoughts?
Thanks
pyaar
Posts: 2
Joined: Wed Jan 09, 2019 6:08 am

Re: Tascam US 20x20 interface!!!

Postby ef37a » Wed Jan 09, 2019 2:05 pm

According to this, https://www.soundonsound.com/reviews/tascam-us20x20
You can't. There are ten line outputs so it might be possible to route different tracks to those then drive a headphone amp?

Dave.
ef37a
Jedi Poster
Posts: 10642
Joined: Mon May 29, 2006 12:00 am
Location: northampton uk

Re: Tascam US 20x20 interface!!!

Postby Music Wolf » Wed Jan 09, 2019 8:52 pm

I have a 16x08, which doesn't see much use. On that model you have a single mix feeding both the line out and headphones.

To use the multiple line outs you basically have to configure the unit as a multi channel mic pre with each mic directly feeding a line out.
User avatar
Music Wolf
Frequent Poster
Posts: 1761
Joined: Fri Feb 17, 2006 1:00 am
Location: Exiled to St Helens

Re: Tascam US 20x20 interface!!!

Postby blinddrew » Wed Jan 09, 2019 9:36 pm

Music Wolf wrote:I have a 16x08, which doesn't see much use. On that model you have a single mix feeding both the line out and headphones.

To use the multiple line outs you basically have to configure the unit as a multi channel mic pre with each mic directly feeding a line out.
I've used my 16x08 with different mixes going to different pairs of line outs (configured in Reaper) but as Dave's mentioned above, I think the two headphone outs are both on the same feed.
User avatar
blinddrew
Jedi Poster
Posts: 8154
Joined: Sun Jul 05, 2015 12:00 am
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: Tascam US 20x20 interface!!!

Postby Music Wolf » Wed Jan 09, 2019 9:39 pm

blinddrew wrote:
Music Wolf wrote:I have a 16x08, which doesn't see much use. On that model you have a single mix feeding both the line out and headphones.

To use the multiple line outs you basically have to configure the unit as a multi channel mic pre with each mic directly feeding a line out.
I've used my 16x08 with different mixes going to different pairs of line outs (configured in Reaper) but as Dave's mentioned above, I think the two headphone outs are both on the same feed.

Yes, you are correct. I was thinking about direct monitoring where you cannot do this :headbang:
User avatar
Music Wolf
Frequent Poster
Posts: 1761
Joined: Fri Feb 17, 2006 1:00 am
Location: Exiled to St Helens

Re: Tascam US 20x20 interface!!!

Postby blinddrew » Wed Jan 09, 2019 9:43 pm

Yep, so it does rather depend on how the OP wants to use it.
User avatar
blinddrew
Jedi Poster
Posts: 8154
Joined: Sun Jul 05, 2015 12:00 am
Location: York
Ignore the post count, I have no idea what I'm doing...

Re: Tascam US 20x20 interface!!!

Postby pyaar » Fri Jan 11, 2019 6:44 pm

blinddrew wrote:
Music Wolf wrote:I have a 16x08, which doesn't see much use. On that model you have a single mix feeding both the line out and headphones downloader.vip/rufus/ appsync.biz/123movies/ ovo.fyi/gomovies/

To use the multiple line outs you basically have to configure the unit as a multi channel mic pre with each mic directly feeding a line out.
I've used my 16x08 with different mixes going to different pairs of line outs (configured in Reaper) but as Dave's mentioned above, I think the two headphone outs are both on the same feed.

my issue has beens solved!!!
______________________________________________
pyaar
Posts: 2
Joined: Wed Jan 09, 2019 6:08 am

Re: Tascam US 20x20 interface!!!

Postby ef37a » Sat Jan 12, 2019 12:20 am

How?

And...WHO are you calling "Has beens"? !!

Dave
ef37a
Jedi Poster
Posts: 10642
Joined: Mon May 29, 2006 12:00 am
Location: northampton uk


Who is online

Users browsing this forum: No registered users