You are here

Microphones / Miking

Microphones & Miking Techniques: An Introduction

When you enter the world of audio recording, one of the first tools you'll encounter is the Microphone. But with the variety available and the myriad ways to use them, it can be a daunting journey. This explainer aims to simplify that process for you.

1. What is a Microphone?

A microphone is a device that converts sound waves into electrical signals. At its core, it captures vibrations (from voices, instruments, or any other sounds) and translates them so they can be amplified, recorded, or transmitted. Different microphones are designed to capture sound in various ways and have distinct characteristics that make them ideal for specific tasks.

2. Types of Microphones

  • Dynamic Microphones - These mics are rugged, moisture-resistant, and can handle high sound pressure levels (SPL), making them perfect for live sound environments and studio applications. They use a diaphragm attached to a coil of wire, placed within the magnetic field of a magnet, which means they don't need a power source.
  • Condenser Microphones - These are more sensitive and offer a higher frequency response and louder output than dynamic mics. They're commonly used in studio recording settings. They require power (from batteries or phantom power) to charge their internal electronics.
  • Ribbon Microphones - Known for their high quality and smooth character, ribbon mics capture sound with a thin strip of metal suspended in a magnetic field. They're fragile and typically used in studio environments.
  • Lavalier Microphones - These are small clip-on mics often seen in broadcasting for interviews and presentations.
  • Shotgun Microphones - With a very narrow area of sensitivity, or "polar pattern," these mics are used to pick up sound from a specific direction. They're commonly used in film and TV production.

3. Miking Techniques

  • Close Miking - Placing the microphone close to the sound source. This technique captures the direct sound and reduces the amount of ambient noise. It's commonly used in both live sound and studio recording.
  • Ambient Miking - Mics are placed at a distance from the sound source. This captures more of the room's acoustics and ambient noise, providing a more "natural" or "live" sound.
  • Stereo Miking - Uses two microphones to capture a stereo image. Common techniques include X/Y (where two cardioid mics are placed close together at a 90-degree angle) and spaced pair (where two mics are several feet apart).
  • Miking Drums - Each drum or cymbal can be miked individually (close miking) or a few overhead mics can be used to capture the entire kit (ambient miking).
  • Miking Guitars - For acoustic guitars, placing a mic near the 12th fret captures a balanced sound. Electric guitars are often miked by placing a microphone close to the amplifier's speaker.

4. Polar Patterns

This term refers to the sensitivity of a microphone to sounds arriving from different directions:

  • Cardioid Picks up sound best from the front.
  • Omnidirectional Picks up sound equally from all directions.
  • Bidirectional (or figure-of-eight) Picks up sound best from the front and back.
  • Supercardioid and Hypercardioid Have a narrower front pickup area but a small rear pickup area.

Explore Further

Choosing the right microphone and employing the best miking technique can dramatically impact the quality of your recordings. Whether you're capturing vocals, instruments, podcasts, or on-field sounds, understanding the basics outlined above can set you on the path to producing professional-level audio. Remember, experimentation is key: try different mics and techniques to find what works best for your unique situation! And check out all of the Sound On Sound articles listed below for plenty of buying advice and 'how to' techniques.

  • link
    Bernt Malmqvist - Pearl Milab

    Bernt Malmqvist - Pearl Milab | Podcast

    Veteran Microphone Designer

    Bernt Malmqvist is one of the last remaining links to the golden age of microphone design. He talks to Sam Inglis about his extraordinary career and the unique design approach he learned from founder Rune Rosander.

    Music Business Oct 2022
  • link
    LEWITT Audio

    LEWITT Audio - Behind The Brand | Podcast

    Pushing microphone technology forward

    LEWITT Audio chat to Hugh Robjohns about their approach to developing, innovating and engineering their range of home, studio and live microphones.

    Music Business Apr 2022
  • link
    Daniel Blackmer of Earthworks Audio

    Earthworks Audio | Podcast

    Extended Range Microphones

    Daniel Blackmer, Director of Engineering at Earthworks Audio, explains the company's distinctive approach to microphone design.

    Music Business Dec 2021
  • link
    Mars Rover Mission 2020

    Sound From Mars With DPA Microphones | Podcast

    Behind The Brand

    René Mørch of DPA Microphones chats to Sam Inglis about DPA's involvement in the NASA Mars 2020 mission.

    Music Business Nov 2021
  • link
    Stewart Tavener - Extinct Audio Microphones

    Extinct Audio Microphones - Stewart Tavener | Podcast

    British Ribbon Microphone Manufacturer

    Stewart Tavener from Extinct Audio and Xaudia chats to Drew Stephenson about the origins of his companies and how he became a ribbon microphone specialist.

    People Jun 2021
  • link
    Abbey Road Studios Spatial Audio

    Abbey Road Studios Spatial Audio Forum | Podcast

    SOS Technical Editor Hugh Robjohns chats to Mirek Stiles about the Spatial Audio Forum and how everyone can get involved in creating 3D audio environments using basic recording equipment.

    People Feb 2021
  • link
    Martin Siedl CEO of Austrian Audio

    Austrian Audio - Martin Seidl | Podcast

    Talking Tech

    Martin Seidl, Founder and CEO of Microphone & Headphone manufacturer Austrian Audio, chats about current products and future technological developments, plus why their core range of products will remain analogue at heart.

    Music Business Jun 2020
Subscribe to RSS - Microphones / Miking