You are here

Microphones / Miking

Microphones & Miking Techniques: An Introduction

When you enter the world of audio recording, one of the first tools you'll encounter is the Microphone. But with the variety available and the myriad ways to use them, it can be a daunting journey. This explainer aims to simplify that process for you.

1. What is a Microphone?

A microphone is a device that converts sound waves into electrical signals. At its core, it captures vibrations (from voices, instruments, or any other sounds) and translates them so they can be amplified, recorded, or transmitted. Different microphones are designed to capture sound in various ways and have distinct characteristics that make them ideal for specific tasks.

2. Types of Microphones

  • Dynamic Microphones - These mics are rugged, moisture-resistant, and can handle high sound pressure levels (SPL), making them perfect for live sound environments and studio applications. They use a diaphragm attached to a coil of wire, placed within the magnetic field of a magnet, which means they don't need a power source.
  • Condenser Microphones - These are more sensitive and offer a higher frequency response and louder output than dynamic mics. They're commonly used in studio recording settings. They require power (from batteries or phantom power) to charge their internal electronics.
  • Ribbon Microphones - Known for their high quality and smooth character, ribbon mics capture sound with a thin strip of metal suspended in a magnetic field. They're fragile and typically used in studio environments.
  • Lavalier Microphones - These are small clip-on mics often seen in broadcasting for interviews and presentations.
  • Shotgun Microphones - With a very narrow area of sensitivity, or "polar pattern," these mics are used to pick up sound from a specific direction. They're commonly used in film and TV production.

3. Miking Techniques

  • Close Miking - Placing the microphone close to the sound source. This technique captures the direct sound and reduces the amount of ambient noise. It's commonly used in both live sound and studio recording.
  • Ambient Miking - Mics are placed at a distance from the sound source. This captures more of the room's acoustics and ambient noise, providing a more "natural" or "live" sound.
  • Stereo Miking - Uses two microphones to capture a stereo image. Common techniques include X/Y (where two cardioid mics are placed close together at a 90-degree angle) and spaced pair (where two mics are several feet apart).
  • Miking Drums - Each drum or cymbal can be miked individually (close miking) or a few overhead mics can be used to capture the entire kit (ambient miking).
  • Miking Guitars - For acoustic guitars, placing a mic near the 12th fret captures a balanced sound. Electric guitars are often miked by placing a microphone close to the amplifier's speaker.

4. Polar Patterns

This term refers to the sensitivity of a microphone to sounds arriving from different directions:

  • Cardioid Picks up sound best from the front.
  • Omnidirectional Picks up sound equally from all directions.
  • Bidirectional (or figure-of-eight) Picks up sound best from the front and back.
  • Supercardioid and Hypercardioid Have a narrower front pickup area but a small rear pickup area.

Explore Further

Choosing the right microphone and employing the best miking technique can dramatically impact the quality of your recordings. Whether you're capturing vocals, instruments, podcasts, or on-field sounds, understanding the basics outlined above can set you on the path to producing professional-level audio. Remember, experimentation is key: try different mics and techniques to find what works best for your unique situation! And check out all of the Sound On Sound articles listed below for plenty of buying advice and 'how to' techniques.

  • link
    David Mellor - Audio Masterclass Course Director

    Mic Polar Patterns - Part 1 | Podcast

    Understanding which Microphone to use

    In the first of this two-part series, David Mellor gives us an introduction to mic polar patterns.

    Sound Advice Mar 2024
  • link
    David Mellor - Audio Masterclass Course Director

    Mic Polar Patterns - Part 2 | Podcast

    Cardioid, Supercardioid, Figure of 8 and Omnidirectional compared

    A valuable test for recording engineers, David Mellor gives examples of different mic types to emphasise the importance of knowing your mic collection in detail.

    Sound Advice Mar 2024
  • link

    Q. Do mics have built-in preamps?

    As electret condenser mics have internal preamps, do non‑electret condensers also have built‑in preamps?

    Sound Advice Jul 2023
  • link

    Q. What is a ‘fully floating’ balanced output?

    I’d like a clearer understanding of what a fully floating balanced output is and how I can take advantage of it....

    Sound Advice Feb 2023
  • link
    B7NssHrswIU.jpg

    Watch Now: AKG C414 The Ultimate Comparison

    Latest SOS feature video now live

    Take a listen to our comparison of four different models of AKG's C414 microphone during a recording session at Half-Ton Studios in Cambridge.

    News
  • link
    Micpedia microphone-data.com website rebranded microphone technical physical information database compare research

    Micpedia website launched

    Popular Microphone Data website rebranded

    Micpedia is a free to use online database that has been built using technical information previously available on the popular Microphone Data website.

    News
  • link
    Imperative Audio PVB

    Imperative Audio Portable Vocal Booth test

    Video shows the results on a close-miked vocal

    Imperative Audio have carried out a test of their Portable Vocal Booth at St Albans Cathedral.

    News
  • link

    Proximity Effect

    In Theory And In Practice

    We all know that close miking boosts the low end. But why? New research from DPA Microphones explains that some instruments are more affected by proximity effect than others.

    Techniques Nov 2021
Subscribe to RSS - Microphones / Miking