17/03/2016 Bookmark and Share

Tegeler Konnektor now available

Digitally controlled routing matrix with plug-in control out now

If you’re sick of patching and repatching your outboard gear, Tegeler Audio Manufaktur might have just the thing. Their new Konnektor is a digitally controlled 2U mastering matrix with a totally analogue signal path, and it’s available now.

The Konnektor is a practical solution for every DAW-based studio for integrating hardware outboard into your setup quickly and with total recall. Up to eight outboard devices can be connected by a Sub-D to XLR breakout cable and the order of each device can be changed by using a web client or accompanying Konnektor plug-in. The plug-in helpfully allows the signal chain settings of every device to be saved into your DAW project, meaning that your outboard device signal chain can be totally recalled in the order you desire.

The Konnektor also has an analogue LR-to-MS and MS-to-LR matrix that can be initiated via plug-in. 

Regardless of whether you’re mastering, mixing or recording, the Konnektor is an intriguing prospect for integrating outboard in a quickly recallable way into every session. 

www.tegeler-audio-manufaktur.de/Konnektor


 

Home | Search | News | Current Issue | Tablet Mag | Articles | Forum | Blog | Subscribe | Shop | Readers Ads

Advertise | Information | Privacy Policy | Support | Login Help

 

Email: Contact SOS

Telephone: +44 (0)1954 789888

Fax: +44 (0)1954 789895

Registered Office: Media House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom.

Sound On Sound Ltd is registered in England and Wales.

Company number: 3015516 VAT number: GB 638 5307 26

           

We accept the following payment methods in our web Shop:


Pay by PayPal - fast and secure  VISA  MasterCard  Solo  Electron  Maestro (used to be Switch)  

All contents copyright © SOS Publications Group and/or its licensors, 1985-2016. All rights reserved.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents.
The views expressed are those of the contributors and not necessarily those of the publishers.

Web site designed & maintained by PB Associates | SOS | Relative Media