Emu Vintage Pro

Sample-based Vintage Keyboard Module

Published in SOS April 2003
Bookmark and Share

Reviews : Sound Module

Photos: Mike Cameron
10 years on from the Vintage Keys module, Emu are looking to repeat its success, this time with 128-note polyphony, 32 MIDI channels and 32MB of sample ROM. But is it a fine Vintage, or past its best?


Paul Ward

The Vintage Pro is a 1U rack module from Emu that aims to offer you access to a range of sounds from various renowned vintage keyboards and synths. Based on the highly successful Proteus 2000 (as with all of Emu's recent rack modules), it features real-time control knobs, 32 MIDI-channel operation and 128-voice polyphony.

I'm always highly dubious of the term 'pro' when applied to any hi-tech item, be it hardware or software. My experiences have led me to the conclusion that anything termed 'pro' usually isn't! But I like exceptions, and I was hoping this would be one. I was somewhat dismayed to discover that the front panel is made of plastic. I don't know what type of plastic, so for all I'm aware it could be as tough as a riot shield, but from the way it feels, I have to say I doubt it. The styling is very much of the 'future retro' persuasion, with silver lettering behind the moulded facia reminiscent of '50s American diners and jukeboxes. Everyone that saw it during the time I had it under review liked it, so that can't be a bad thing.

User Interface

The front panel closely resembles all of Emu's recent rack synth releases. From right to left across the front panel we first encounter the power button, followed by the large, clicky data-entry knob. Beyond these are the main editing buttons, which access more than one task depending on the current context. They

Emu Vintage Pro £587
pros
Powerful, involving synthesis engine.
Excellent filters.
Beats mode can provide a wide range of inspirational material with minimal effort.
32 MIDI channels and 128 voices.
Instant editing from control knobs.
Multiple outputs with digital output as standard.
cons
Some sounds still suffer from having too few samples.
Editing can be complex.
Some of the 'vintage' sounds aren't particularly authentic.
Questionable build quality.
Too much ROM given over to non-vintage synth/keys sounds.
Price needs trimming.
summary
The Vintage Pro offers a large number of synth/keyboard sounds in a single rack space. Some of the sounds don't stand up to close examination, but there's also a powerful synth in here that goes well beyond simple emulation. It's a little pricey, but also capable of more than its vintage tag suggests. Try it before you buy it, to see if its hidden depths appeal to you.

include a pair of left/right cursor controls, plus keys marked Home/Enter, Save/Copy, Edit, Master, Audition and the Arpeggiator/Beats button. In the centre is the 2 x 24 character backlit LCD, and to the left of the screen are the real-time control knobs. The Control button to the upper left of the control knobs determines the function of the latter; each time the button is pressed it steps through three control groupings, whereupon the parameters controlled by the four knobs changes. An LED denotes which control group is currently active and the control assignments are printed above each knob in line with the LED. A further LED for each control knob signifies when a knob has been moved away from its default programmed value within the current Preset. These knobs will transmit MIDI data, allowing the movements to be recorded and played back from a MIDI sequencer, or for use with a software synth, for example. The knobs can be set to provide only real-time control, or can also act as editing knobs when paging through the Vintage Pro's editing screens. To the far left of the front panel are a headphone output and volume control.

If you work for another hi-tech manufacturer and you are simply skimming this review, then read the following sentence twice! When it comes to designing their synths' power requirements, Emu have got it right — no wall-warts, no line-lumps, no hard-to-find power connectors, no captive cable that needs replacing with a soldering iron — and, most importantly, compatibility with any voltage from 90 to 260 Volts AC at 50 or 60Hz. In other words, if you're gigging overseas, the likelihood is that this synth can be plugged in and will simply work, straight out of the box. If Emu can do it — and they have for many years — why can't other manufacturers?

What's That Sound?

The Vintage Pro offers a spread of ROM-based material covering classic synth and keyboard sounds from the '60s, '70s and '80s; synth waveforms from ARP, Moog, Roland, Sequential Circuits, Yamaha and Oberheim gear are all provided. Electric pianos are represented by samples of Rhodes, Wurlitzer and a wonderfully clunky Yamaha CP70, and there are organ samples from tone-wheel Hammond, Farfisa and Vox. Other revered machines include the wonderful Mellotron and the currently in-vogue Clavinet. There's a small number of FM sounds in there too, typically biased towards those famous electric piano and bass sounds.

The analogue synth sounds are very good indeed, due in part to the excellent Emu filter. The Oberheim synths are worthy of particular mention, capturing the spirit nicely. There are a couple of Roland TB303 waveforms, as well as some from the Roland SH101, and some of the Moog basses are very powerful. But I have to wonder if the guy who created the Moog Taurus preset actually had any real examples of the bass pedals to compare with, because it sounds nothing like the Taurus in my studio! The dreadful example Preset is raspy and lacking any bottom end depth, or filter movement. This, as with all of the Vintage Pro's preset failings, is mitigated to a great extent by the power of the synthesis engine, which is quite capable of turning many of the less appealing Presets into something much more to your liking with a few twists of a knob or two.

The Clavs are excellent, with all the grit and cut you'd want to expect. Variant presets offer filtered and phased versions that would keep a '70s US cop show in material for years. The Mellotron strings are very good indeed, and the brass isn't bad, but the choirs just didn't seem right to me — they suffer badly from having too few samples (a criticism often levelled at Emu's old Vintage Keys module) and seem fuzzy and unfocussed, despite all my attempts to edit some life into them. The electric pianos are also marred by the use of over-obvious hard and soft switched samples, and although the Hammond organs are excellent, they represent but a small selection of the many possible Hammond sounds, and the choice may not be to your taste. On the whole, I found the most satisfying sounds to be those which didn't attempt to recreate any specific vintage machine!

Much as with Emu's Vintage Keys of old, I'm somewhat bemused and disappointed that sample ROM has been given over to so much non-synth/keyboard material. A couple of electric bass and guitar samples may be acceptable, but I fail to see why a so-called classic synth/keys module needs 16 cymbals and 25 shakers! I counted over 200 percussion instruments (including TR909 and 808 samples), the space for which might have been put to better use improving (say) the Mellotron choirs or adding more velocity layers to the pianos. Maybe I'm overestimating the amount of ROM being used, but it does seem a shame nonetheless. I would imagine the reason for including the array of drum and percussion samples is that it makes the Vintage Pro more of a stand-alone machine, but I can't help feeling that this is misguided.

Architecture

In its unexpanded form, the Vintage Pro contains 512 ROM Presets and 512 editable User Presets. As on Emu's other recent rack synths, sound expansion options may be added to the Vintage Pro in the form of SIMMs, and if you do this, extra factory ROM Presets will appear automatically — up to 1024 per SIMM. The Presets are arranged in banks of 128, and finding your way around them is made easier by the Vintage Pro's 'Sound Navigator' system. This is simply a method of categorising sounds by types, such as bass, string, pad or voice and then scrolling through the Presets that correspond to that category. Unfortunately, there is no ability to add Presets into more than one category, although you can also create your own categories. Instruments (of which more in the next paragraph) are also categorised, although as these are ROM objects, they may not have their category changed.

  All Beat Up  
  Super Beats mode is reminiscent of a feature often found on home keyboards, such as my trusty Yamaha DJX. The idea is based around a collection of (up to 16) multi-part rhythms and riffs that may be brought in and out of the mix by MIDI note on/off messages. Each beat riff contains a combination of grooves, alternate grooves, fills and instrument parts. Each part will respond to MIDI velocity, if required, and parts may be grouped together to be introduced with a single key-press. Parts can be set to play only while a key is held down, or to 'latch' on/off with a key-press. Special key assignments allow for all parts to be muted, latched/unlatched, or for the beat to be started and stopped. One neat option returns the beat to the start of the sequence on a key-press, but I felt this was spoiled by a lack of responsiveness. One very clever feature is the ability to add 'business' to the beat by introducing parts with a continuous controller, such as a mod wheel.

I've always enjoyed playing around with toys such as this, and I found it very inspiring to work with — not least of which because the beats will pass their data over MIDI, enabling external MIDI instruments to join in the fun too. Options are provided to transpose and velocity-scale beats parts, offset the trigger keys and to start/stop beats with MIDI Song Start commands. This is truly clever stuff, and it's capable of generating some deceptively organic rhythm sections. I was hooked for ages!

 
A Preset may 'link' to a second Preset with which it may be layered or split across a keyboard, and each Preset may consist in turn of up to four Layers. Layers are themselves each made up of an Instrument (Emu's term for a collection of keymapped samples) which passes through a Z-plane filter and an amplifier. Each active layer uses one of the Vintage Pro's voices, but may be switched or crossfaded by key position, velocity or a modulation source, such as an envelope, LFO, knob or control pedal. The transposition, tuning, volume and pan position of each layer is also definable. Three envelopes are available, two of which are designated to act as volume and filter cutoff envelopes (though they can also be used as modulation sources for other parameters), whilst the third is freely assignable. The envelopes are six-stage types. Each instrument comes with its own factory preset volume envelope, but this can be overridden. Envelopes may be time or tempo-based; this can be a useful time-saver, since, for example, envelope times don't need shortening when you want to use a Preset in a fast tempo song.

Emu's Z-plane filter is a well-known and highly respected feature of their synths and samplers (albeit one that is now a decade old in concept). 50 Z-plane filter types are available in the Vintage Pro, including the standard 2-/4-pole low-, high-, and band-pass types, and there are also plenty of considerably more esoteric variants, such as 12th-order formant morphing filters and special resonant types. Due to the processing complexity of the 12th-order filters, the number of voices of which the Vintage Pro is capable is reduced when they are in use. The voice/filter processing allocation is handled dynamically, but at the extreme, where you choose to use 12th-order filters in all currently active Presets, the available polyphony would be reduced to 64 voices. I'd suggest, however, that this is hardly likely to be a problem in practice! The filters are warm and smooth, with enough bite to make the best use of many of the analogue waveforms available. If anything, the filter is probably over-specified in the context of 'vintage synthesis', but that's not necessarily a bad thing.

Two LFOs are provided. These are considerably more sophisticated than most, with a choice of 17 waveforms, ranging from simple sine, sawtooth and square waves to pulse, random and steps of musical intervals. The LFOs can be set to retrigger at a note-on command, or run freely. Speed may also be set to follow MIDI clock tempo, with a range of subdivisions down to a 32nd note. One very appealing feature here is a 'Variation' control that creates subtle, or not-so-subtle rate changes with each key-press. This can be used to make a very rich chorusing effect that goes a long way towards recreating the warmth of many vintage synth sounds where LFO speeds would often vary by small amounts from voice to voice — I liked this effect a lot.

The Vintage Pro offers up to 24 'PatchCords' per layer, and these make understanding the synthesis engine a little trickier, although they are also where the much of the power and flexibility is to be found. They can be thought of as virtual

  Sounds Interesting  
  If you get a chance to check out the Vintage Pro, you might want to try the following presets. Well, they were my favourites, anyway...
Bank 0, Patch 10 'Tron Violins': The best of the Mellotron's sounds.
Bank 0, Patch 25 'Mini Snap': Solid Moog bass.
Bank 0, Patch 66 'CP70': Very good rendition of the classic Yamaha stage piano.
Bank 0, Patch 77 'Clav 2': The classic funky Clav.
Bank 0, Patch 107 'Six Out': Sweet 'vanilla' Hammond.
Bank 1, Patch 0 'Wide OB': If a big Oberheim synth sound is important to you, this is a good start.
Bank 1, Patch 23 'Deep Sky': If you need reassurance that this synth isn't just about simple emulations, this fat multi-layered pad should rest your mind.
Bank 1, Patch 118 'SawsOfOld': Standard '70s-style portamento sawtooth lead.
Bank 2, Patch 33 'Solina': A fine example of one of the most revered of the analogue string synthesizers.
Bank 2, Patch 82 'Tron Flute': Two words for you: 'Strawberry', and 'Fields'.
Bank 3, Patch 8 ' FatFingers ': A very fine electric bass — but should it be here at all?
Bank 3, Patch 72 'Chill Room': Tweak those knobs as the beat pattern plays. If this appeals to you, there's plenty more where that came from!
 
versions of the cords seen littering the front panels of modular synths. The cord simply connects a modulation source to a modulation destination. Each PatchCord has its own Amount control, which is capable of passing a positive or negative modulation signal to its destination. To add some spice to the mix, Emu have also added a number of Modulation Processors to use between a modulation source and its destination. These processors include a summing amp (which combines two modulation sources), a switch (which toggles between 0 and 1 when a modulation signal passes a threshold), a diode (which passes only positive modulation amounts) and a lag (which slows down the rate of change in modulation amounts). In addition to the Modulation Processors contained within each Layer, two 'common' processors are also available to all the layers from the 'Preset level'.

The Arpeggiator

You can run up to 32 separate arpeggiators simultaneously, each on an individual MIDI channel. This offers a great deal of flexibility and is heaps of fun. A preset can store its own programmed arpeggiator settings, or make use of those defined in the global arpeggiator page — either way, the range of controls is identical. The arpeggiators will run to the Vintage Pro's internal clock, or from an external MIDI clock source, although each Preset can be assigned a tempo division to run at, for example triplets, or half speed. Simple arpeggiator modes are provided, such as up, up/down, random and notes in order (or reverse order) of keys pressed. In addition, Emu allow for pre-defined patterns of notes to be played — there are 300 factory patterns and 100 more which may be defined by the user. An interesting variation here is the idea of an extension count and extension interval, which simply transpose the arpeggio a number of times over a defined interval. When set to an interval of 12 semitones, the extension count can simply be thought of as an octave range parameter, but when you consider intervals other than an octave, you can begin to imagine the musical potential of this feature.

Further arpeggiator options include a pre-delay setting where the arpeggiator is disabled for a period of time before kicking in, allowing you to play normally before holding keys down to bring the arpeggiator in. There is also a post-delay function which, in conjunction with the Duration parameter, plays normal notes after the end of a fixed-duration arpeggio. All clever stuff. It's also possible to use physical MIDI controllers to change some arpeggiator parameters, such as note interval, note length, gate time and velocity.

  Bringing Up The Rear  
 
Round the back, there are five MIDI connectors; two MIDI Ins, two Thrus and a single MIDI Out. I'm glad to see that Emu have coupled the second MIDI In with a Thru; it makes setting up in a complex MIDI rig a potentially much easier task. And two MIDI Ins! Yes, that's right... that does mean 32 separately addressable MIDI channels. Coupled with the Vintage Pro's 128-voice polyphony, this should keep all but the most power-hungry users happy. In the context of peppering your mix with vintage synth sounds, I'd suggest it highly unlikely that you are going to run into polyphony problems. Many folks (myself included) like to do a lot of on-the-fly layering in their music, doubling up bass, sequence and pad sounds; this is made considerably easier with the additional channels, removing the need for mid-song patch/volume changes, or the editing of patches.

The Vintage Pro is no slouch in the audio connection department either. There's an S/PDIF output on a standard phono connector, but this is also capable of being linked to an AES Pro input. Three pairs of analogue audio outputs are provided: Main, Sub 1 and Sub 2. The Sub outputs are rather more than simple outputs, since they provide a send/return system on stereo jack connectors, enabling external effects to be looped in before the signal is passed on to the Main outputs. A little creative thought suggests that these could be pressed into service to mix in other instruments; for live use this could be a real winner. I have used a similar setup with my Kurzweil K2000 and know how much neater it makes my live rig.

 

Multitimbrality

Using the Vintage Pro multitimbrally is simply a case of sending patch, volume and panning MIDI commands on any channel. But Emu do provide a Multi mode, where settings for each of the 32 channels may be stored internally. A Multisetup can then be retrieved with a MIDI program change command; 64 of these multitimbral locations are available. The volume and panning of all 32 channels can be seen at any time on a special Mix page, which, although coarse, is a useful aid when you're trying to figure out what is happening.

There are two stereo effects processors. Together they provide a very powerful addition to a single Preset, though all-too-familiar compromises have to be applied across an entire multitimbral setup. Given that companies such as Novation and Korg have long since got around the 'effects in multitimbral mode' problem by providing effects on a per-channel basis, I am a bit disappointed with this aspect of the Vintage Pro's operation. I might also have expected each synth to be able to tap into the full range of effects, but, generally speaking, Effect A handles the reverbs, and Effect B takes care of modulation effects and delays. The quality of the effects seemed OK to my ears, too — certainly a match for those from some dedicated effects processors. The multitimbral problem is somewhat eased by the provision of four effects sends, shared between the two effects and the feeds to the Sub 1/2 audio outputs, each of which have an independent level control into Effect A/B. A variable amount of Effect B may be fed into Effect A. Effects can be chosen in one of three ways: from within a Preset (so that the effects are specific to that preset), from within the Master Effects section (in which case the same effects apply to any Preset, whether in single Preset or multitimbral mode) or from within a Preset chosen on a specific MIDI channel when in multitimbral mode.

Conclusions

This review could easily become a three-part series, as all of Emu's recent rack synths have had plenty in the way of synthesis capabilities, but as most of the features they all share have been covered in previous reviews, I'll draw things to a close here, pausing only to refer you back to the original SOS Proteus 2000 review, and that of its larger relative, the Proteus 2500 (see SOS March 1999 and March 2002, or point your web browser at www.soundonsound.com/sos/mar99/ articles/emuproteus.htm and www.soundonsound.com/sos/mar02/ articles/emuproteus.asp respectively).

The Vintage Pro seemed much more to me than a simple sound module, the sort that merely sits in a rack playing the odd bass line and Mellotron pad. I found it an inspiring, if complex, machine, with some ingenious creative twists. If Emu have a problem with the Vintage Pro it is going to be convincing people of that fact — especially at what seems to me a slightly high price point. On that subject, I've already seen a £50 discount advertised by some UK suppliers, so there's hope yet, but it needs further trimming in my opinion.

I'm always happy to try out vintage synth emulations, and with the Vintage Pro I thought I would be getting something similar to a Roland JV expansion board in a separate rack box. So it is ironic that I found the Vintage Pro to be capable of so much more than I thought it would, yet occasionally disappointing in the very area I was expecting it to excel. As a vintage synth/keyboard module, it does a fair job, but there are more targeted virtual synths doing the job more accurately, such as GMedia's M-Tron for the Mellotron, Emagic's EVP73 for electric pianos, and Native Instruments' B4 (for Hammonds) and Pro 53 (for Sequential's Prophet 5), to name a few. But if you only need some of the sounds of these old instruments, and you want them in your rack, then this may be the solution for you. And don't be misled by its name — the Vintage Pro is a seriously powerful synth and rhythm tool with a range of sounds far beyond that of a simple ROM replay module.

 information
£587 including VAT.
Emu-Ensoniq Europe +44 (0)131 653 6556.
+44 (0)131 665 0473.
Click here to email
www.emu.com

SOS Readers Ads
GRAB A BARGAIN

£471,933

of Second-User Gear for sale now — don't miss out!
WIN Great Prizes in SOS Competitions!

 

Home | Search | News | Current Issue | Tablet Mag | Articles | Forum | Subscribe | Shop | Readers Ads

Advertise | Information | Privacy Policy | Support | Login Help

 

Email: Contact SOS

Telephone: +44 (0)1954 789888

Fax: +44 (0)1954 789895

Registered Office: Media House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom.

Sound On Sound Ltd is registered in England and Wales.

Company number: 3015516 VAT number: GB 638 5307 26

         

All contents copyright © SOS Publications Group and/or its licensors, 1985-2014. All rights reserved.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.

Web site designed & maintained by PB Associates | SOS | Relative Media