You can't buy these in-ear monitors in shops, as each pair is custom-made — but if you need outstanding comfort and noise rejection, the extra time and money might just be worth it!
Buying a set of ACS in-ear monitors is a two-step process, which could potentially be seen as discouraging to the modern shopper accustomed to high-street availability or Internet click and credit. First, you make an appointment to have a mould taken of your ear canals, and then you wait for the earpieces to be custom manufactured for your ears.
Initially, an audiologist will check you have no problems such as excessive wax build-up or infection. Then a small piece of foam is placed inside the canal. The rest of the ear canal is then filled by syringe with something not dissimilar to bathroom sealant. This fills the ear, effectively sealing you from the world of sound — a feeling I have never been entirely pleased by! The compound then hardens and is carefully removed, leaving a detailed impression of your ear canal, from which the custom moulds are created. Everyone's ears are different, and only by taking these impressions can comfortable, close-fitting moulds be made.
The blank moulds are then sent off to ACS in Banbury, where the impressions are reproduced in medical-grade silicon, and then hand-fitted with three balanced-armature transducers. Finally, they are boxed up and sent on to the customer, in this case me! But was it worth the wait — and the price?
I took delivery of mine while engineering at a show in London. It was a hectic day, so I had no time to do anything but open the box, admire the leatherette container and extra-soft carrying pouch, and check out the pristine mouldings. It wasn't until next day's train journey home that I actually got a chance to put them in my ears!
Trains may not seem an ideal environment, but I do an increasing amount of my critical listening on them. The T1s' ability to cut out ambient noise would be tested well here, but first I had to get used to the custom moulds (I have been using in-ear monitors for over 15 years now, and they all take a bit of getting used to).
So how do they sound? Well, on plugging them into my iPhone and choosing the first track at random (Stevie Wonder's 'Sir Duke'), I was smiling within seconds. The sound was crisp but not overly bright, with plenty of detail as well as good low-end extension — in fact, probably the best low end I have ever had from a device such as this. The bass does seem to be very dependent on getting a close fit, however, and it helps to practise putting the T1s in in front of a mirror, as the first couple of times it can be a bit tricky. Fortunately, they are labelled left and right using coloured dots, which helps!
I then decided to push the low end a bit harder with a bit of Deadmau5 (this time a CD-quality file), and they didn't disappoint. The low end was very full — a fair representation of what I expected to hear, as I have been using Deadmau5 to test numerous sound systems recently.
Another track I've been using for systems testing for many years is 'The Horses' by Rickie Lee Jones: it is well recorded and mastered, and I find it very useful for highlighting any inherent flaws in a system. The T1s held up, and though I found them a little bright, the mid-range was excellent and revealing in the crucial vocal area.
A big question for me, though, is 'Can I mix with them?' I spend a lot of time travelling, and though I wouldn't try to mix only on headphones or earbuds, I do a lot of the grind work of mixing (cleaning up tracks, editing, checking takes, and so on) on the move. I had previously always used my Sennheiser HD25 headphones for this, but started experimenting with the ACS T1s, and the detail they are able to provide is excellent for pinpointing problems. The are very accurate to work with and surprisingly unflattering — I found them in some (good!) ways to be similar to working with NS10s. I always check mixes on my main monitors, but those I did while using the T1s needed little in the way of re-jigging to transfer well.
However, most purchasers will be buying the T1s for in-ear monitoring use on stage, of course, and for this I believe they are exceptional. In particular, I found that their rejection of stage noise (once I had them seated correctly) was excellent, and they are also very detailed and surprisingly full-sounding. .
Similar devices available from Ultimate Ears, and many manufacturers offer generic ear buds at a lot lower cost, but without the custom fit.
2.1 Monitor System
This interesting monitor system uses the natural roll-off of the satellite speakers to provide the crossover with the subwoofer.
Studio Nearfield Reference Monitors
Building to a price inevitably entails compromises. The art is in choosing the right ones...
Three-way Active Monitors
Sometimes, a dose of old-fashioned good engineering delivers something well worth listening to...
Active Two-way Studio Monitors
Their A7 nearfield monitors received many plaudits, not least in the pages of SOS, but manufacturer Adam thought there was room for improvement.
Active Nearfield Monitors
PMC broke new ground a decade ago with their TB2 monitors, but the competition have been catching up. Does PMCs new activated design nudge them back to the front of the pack?
Secondary Reference Monitors
Avantone have added on-board amplification to their contemporary take on the classic Horrortone secondary monitor, and the result is something quite special...
Two-way Nearfield Active Monitors
India may be a growing force in most industries these days, but few Indian pro-audio companies have made it into Western markets. Can Sonodynes speakers change all that?
The time-domain response of monitors is often sacrificed for level, but this sealed-cabinet design tackles that issue head-on...
Nearfield Monitor Speakers
With digital and analogue inputs, these small speakers from newcomers Infrasonic promise a lot for the money. Can they outperform their budget price tag?
2.1 Monitoring System
If you demand brutal and revealing precision from your monitors, read on...
Active Three-way Monitors
As well as a distinctive design, these huge nearfield monitors offer a frequency and time-domain performance that compares with the best.
Studio Reference Monitors
Adam make the leap to a three-way speaker design that seems to pay dividends in clarity and separation.
JBL have a reputation for clinically precise monitors, but this time theyve come up with something a little smoother...
Coaxially-mounted speakers may seem a bit old-school, but theres nothing wrong with the theory — and a touch of DSP can make them very modern indeed!
DSP Reference Monitors
Built-in DSP extends the flexibility and usefulness of these capable speakers.
Events new owners make some extravagant claims for these new high-end monitors, whose design is said to put quality first. Do they live up to the hype?
Studio Monitors & Subwoofer
Samsons new low-cost nearfields can produce a big sound, but do they measure up for serious mixing? We find out.
Ribbon tweeters can yield a smooth sound, while still capably reproducing transient detail — and the Pro Ribbon range promises to do so for an attractive price.
Active Nearfield Monitors
Focal control everything from design to manufacture in their factory in France — and this approach appears to be paying off.
Active Midfield Monitors
Getting the balance right between the benefits and disadvantages of ported and non-ported speaker designs is a tricky job, and K+H do it better than most with this ported model.