Grace Design M201

Microphone Preamplifier

Published in SOS January 2009
Bookmark and Share

Reviews : Preamp

Regular readers will know that our Technical Editor isn't prone to excessive use of hyperbole — so when he calls a product "awesome", "stunning" and "sublime", it's probably time to sit up and take notice...

Hugh Robjohns

Grace Design M201Photo: Mike Cameron

The American manufacturers Grace Design have established a reputation for very nice-sounding professional audio products, and the latest addition to the Grace family is the model reviewed here: the M201 two‑channel mic preamp. This employs exactly the same preamp design as that in Grace's renowned 801 model, but has some interesting bells and whistles, including an optional A‑D converter. It's worth noting that the original model 201 preamp was in production for 12 years, but it has been superseded by this all‑new M201 model. There are many differences between the two, including size: the new model is twice as large as its forebear. It also features a completely revised circuit design with a fully balanced signal path throughout, high-current output drivers, and a ribbon‑microphone mode, amongst other highlights.

Grace Design's philosophy has always been to build products that do the job right, rather than build them to meet a target budget, so Grace products could never be called cheap — but I think they can still be described as cost‑effective. For a start, they offer a five‑year warranty, which says something about the faith they have in the reliability of their products, but also the build quality, the component selection and the generally over‑engineered approach that makes Grace products virtually bomb‑proof. I know of Grace units in daily use after more than 10 years that still look, work and sound like new: these things are built to last, and that makes the initial investment worthwhile, in my book.

Overview

Whereas most two‑channel mic preamps are housed in half‑rack‑width cases, or a 1U rackmount chassis at most, the Grace M201 is a very substantial 2U rackmount unit. It needs the larger cabinet, too — there isn't a lot of wasted space in the box, and you'll need to have spent time with the exercise weights to move this beast about, since it weighs an astonishing 7.5kg (16.5lbs). I've owned cars made of thinner steel, and I've seen smaller torroidal transformers in serious power amplifiers. There are a lot of compact multi-channel mixers on the market, with less complicated circuit boards in them, too! All the rotary controls are high-quality switches — gold‑plated Elnas for the gain controls — the push buttons are all illuminated, and all signal and mode switching is via sealed gold‑contact relays. This is one seriously over‑engineered piece of kit with a build quality that is — and I hate using this word but can think of none more appropriate — awesome. Truly awesome.

The M201 is available in two versions: with or without a high-performance, 24-bit, 192kHz A‑D module. However, this is not offered as a user‑installed option, not least because it requires a replacement face plate; but it can be ordered pre‑installed from the factory, or retrofitted to standard M201s by the dealer.

The rear panel of the M201 is laid out clearly and simply, although it does offer some surprises. Mains power is connected via the usual IEC socket with integrated voltage selector, fuse holder and RFI filter. Each preamp channel is provided with a female XLR for the normal mic input and two male XLRs (wired in parallel) for the line-level outputs. These duplicated outputs make it easy to record the output on two machines at the same time, or send one output to a recorder and the other to a monitoring system. A further pair of male XLRs provides the line outputs of a built‑in sum-and-difference matrix, of which more in a moment.

Another optional fitment provides a pair of four‑pin female XLRs, mounted above the main channel I/Os. These connectors provide a second set of microphone inputs equipped with 130V powering, specifically for DPA's high-voltage capacitor microphones (4003, 4012 and 4016). These specialist mics boast an extraordinary maximum SPL capability — typically 10dB more than a standard mic — which is useful if you plan to record a Space Shuttle taking off from the launch‑pad, but of limited use in musical applications...

If the optional A‑D module is fitted, a further eight connectors are added to the list. Two more female XLRs accept external line inputs to the converter, while two male XLRs provide duplicated or dual‑wire AES3 outputs. There is also an RCA/phono socket and optical TOSlink connector for S/PDIF interfaces, and a pair of BNC connectors for word clock in and out. The word clock input will also work with Digidesign's LoopSync system, and all the digital outputs are active simultaneously.

The front-panel controls are laid out very spaciously, and clearly labelled. The two identically equipped mic-channel control sections dominate the left-hand side, while the sum-and-difference matrix section fills the middle. In the standard M201, the remaining front panel is blank apart from a large illuminated power switch, but the review model was fitted with the optional A‑D module, which fills this space with a meter and function display panel, accompanied by six additional push buttons to configure the converter.

The largest control knobs are the channel gain switches, and these span a range of 18 to 64dB in 24 precise 2dB steps. The adjacent rotary controls are input mode/select switches. The topmost option is the standard mic input mode (confusingly labelled '48V'), while the next position is for ribbon mics, followed by the DI input mode and finally the 130V DPA mic input (if that option is installed). The DI input socket is located below this source switch and is, unusually, balanced (although it will accept unbalanced sources quite happily). The input impedance is a very healthy 1MΩ for unbalanced sources (and 2MΩ for balanced ones), while the gain range is automatically padded down 20dB from normal, to span ‑2dB to +44dB.

The ribbon-mic mode disables phantom power, bypasses the input DC blocking capacitors, adds 10dB of gain (to bring the range up to 28‑74dB) and increases the input impedance to around 20Ω — which is widely recognised as the optimal impedance for this kind of mic. Of course, this mode can also be used to advantage with other low-output dynamic mics, as well as valve microphones powered from dedicated PSUs.

The standard mic input mode presents an input impedance of 8kΩ, which is significantly higher than the usual 1.5 to 2.4kΩ range of most mic inputs. However, there is growing acceptance that higher input impedances sound better, and a lot of high-end preamps (particularly Rupert Neve‑influenced ones) follow this practice. Despite the '48V' label on the input switch, phantom power is not turned on by default in this mode; you still have to select it manually via an illuminated push button below the gain control. Interestingly, the red LED in this switch is powered by the phantom voltage itself, which means that if the input is fed from a mic splitter that passes phantom power, the LED will illuminate even if the local phantom power hasn't been activated! This phantom switch also activates the 130V supply to the DPA inputs (if installed). The measured phantom voltage was spot-on 48V and didn't drop at all when the second channel was heavily loaded, indicating a very solid power supply.

Alongside the phantom‑power button on each channel, two other buttons provide a polarity reverse and a 20dB pad. The pad switch doesn't operate in the DI mode but will affect the normal, ribbon and high-voltage inputs. The polarity reversal affects all inputs. There is no traditional level meter on the standard unit, but a bi‑colour LED to the right of the gain switch turns green for output signals above ‑14dBu and red for signals above +16dBu (12dB below clipping). If the A‑D module is installed, a large bar-graph meter displays signal levels very clearly.

The Matrix

The M201 offers some useful features not found on many preamps, including M/S controls and a setting for powering ribbon microphones.The M201 offers some useful features not found on many preamps, including M/S controls and a setting for powering ribbon microphones.

The built in sum-and-difference matrix takes the outputs from the two mic preamp channels just before their output drivers, and passes them through sum‑and‑difference amplifiers to provide matrixed outputs. This facility converts M/S inputs to left‑right stereo, or vice versa. So if you connect two microphones to the preamp configured as a Mid/Side array (Mid to channel 1, Side to channel 2), then this matrix will decode their signals to normal left and right stereo signals and output them from the dedicated output sockets (the main preamp channel outputs will still carry the individual microphone signals of course — Mid and Side). A 12‑way switch on the front panel allows the stereo width of the Matrix output to be adjusted from full mono (100 percent mid) to ultra‑wide stereo (30 percent mid and 70 percent side), with an equal Mid:Side ratio at the 12 o'clock position. It is worth remembering that if a traditional (coincident) stereo mic configuration is used, the Matrix outputs will provide encoded Mid and Side signals, which may be useful in some applications.

A‑D Module

The A-D converter module presents a large, 20-segment, horizontal, stereo bar-graph meter, with a 60dB range, various back‑lit status displays, and six push buttons (three above and three below the display) to configure the operating mode. The input to the A‑D section is determined using the bottom left button, which cycles around three options: main preamp outputs, M/S Matrix outputs, and rear-panel line-inputs. The last option allows the A‑D converter to be used with external line-level signals, which is a useful facility — particularly because it makes it very easy to insert some external processing between the preamp and converter, such as an equaliser or compressor.

The top left button selects any of the six standard sample rates (from 44.1 up to 192kHz), plus Off. The last setting puts the A‑D module in a low‑power standby mode that stops the sample clock oscillator. The next button along is used to select the clock source — which may be internal, external word clock, or external LoopSync mode. In the case of this last option, the word clock output socket is connected directly to the clock input socket, whereas in the other modes the clock output carries the internally generated or reclocked external clock signal. External synchronisation benefits from Grace Design's proprietary dual‑stage jitter-reduction system, called 's‑Lock', and its logo is displayed when this system is active, along with the current sample-rate and clock-source settings.

The top right‑hand button configures the digital output mode (professional or consumer formats), and also offers the dual‑wire interface mode for high‑rate AES3 interfaces. The meter's peak-hold mode is determined by the bottom right-hand button, while the one next to that selects one of two configurable A‑D calibrations. The two factory options equate 0dBFS with either +22 or +18dBFS, but full instructions are provided for setting alternative alignments of +20 or +24dBu.

Technology

The Grace preamp signal path is fully balanced throughout, and there are no transformers or electrolytic capacitors in this signal path other than for DC blocking of phantom power — and even they are bypassed in the ribbon-mic mode. The fully balanced signal path provides more headroom than do single‑sided designs (clipping occurs at +28dBu, in fact), and a high‑current output stage is claimed to be able to drive extremely long cable runs (up to 1500 feet) and low-impedance capacitive loads without any signal loss. The gain stages are based on 'transimpedance' amplifiers (current amplifiers) which Grace suggest provide better dynamic performance than the more traditional voltage amplifiers employed in most preamp designs, and extensive use is made of integrated circuits, on the basis that the technology now provides far better component matching, device matching and temperature tracking than is possible with discrete circuitry.

A lot of attention has been paid to the selection of the types of passive components used — resistors and capacitors, relays and switches — and it is very clear that this attention to detail is what endows the M201 with its sonic character, or rather the absence of character. This is an extremely clean and neutral-sounding preamp, which never seems congested or strained, even at high gain settings.

The 24-bit, 192kHz-capable A‑D converter module is based on the Cirrus CS5381 — a fifth-order, multi-bit, delta‑sigma converter — and is claimed to have ultra-low latency (about 0.3ms at a 44.1kHz sample rate). This is a differential input device that integrates well with the M201's fully balanced architecture, and very careful design ensures that the analogue and digital power supplies and grounds are kept separate. Grace Design apparently selected this particular A‑D converter chip because it has a more gentle anti‑alias filter than most of the alternatives, and this was found to provide more musical‑sounding results. Distortion and noise artifacts are still below ‑110dBFS, which is more than adequate.

The crystal‑based internal clock has a very low intrinsic jitter, and external clocks are processed through a two‑stage process. The first PLL can lock to a wide sample-rate range (about ±8 percent) and rejects jitter above about 500Hz, with increasing attenuation of 12dB/octave as the jitter frequency rises. However, if the sample rate is within ±200ppm of nominal, the second stage s‑Lock PLL is able to reject incoming jitter from 0.1Hz, with more than 60dB of attenuation at 1kHz. The result is a very stable and accurate A‑D conversion, even if clocked from an external reference.

Time To Listen

The review M201 was fitted with optional extras including the 130V DPA mic input module (top right) and the A-D module (top left). The review M201 was fitted with optional extras including the 130V DPA mic input module (top right) and the A-D module (top left).

The Grace M201 is, in every way, a stunning microphone preamp. The build quality is uber‑impressive, the feature set is comprehensive, the options are well thought out, the A‑D stage sounds sublime, and the preamp itself is about as good as it gets. I've not found many microphone amplifiers that compare well with my own GML 8304 preamps, but the Grace does, easily. It is one of the cleanest sounding preamps I've ever had the pleasure of using and it does the job asked of it without any fuss at all — even at extreme gain settings. It sounds very open and airy at the top end while also being extremely well extended and full at the bottom end, and that doesn't change with gain at all. It sounds big and spacious when working with stereo pairs, with completely stable and solid imaging.

I tested it with a pair of AEA R92 ribbon mics, both in X/Y and M/S configurations, and found that it performed every bit as well as the TRP preamp that I normally use with these ribbons. There was plenty of gain in hand and masses of headroom. In one draughty recording venue, the lack of a high‑pass filter on the preamp channels concerned me at first, but there was so much headroom and so little distortion that the subsonic rumbles captured by the ribbons were handled with ease, and could be removed with precision later in the DAW. Many preamps would have suffered from intermodulation or even overload problems in similar circumstances. The built‑in matrix facility is handy, and although the width control only provides 12 settings, I found that these proved more than sufficient in practice.

The DI input performed as well as everything else, and was much liked by my guitarists — although it is exceptionally clean, and some 'in the box' processing to add character was a definite necessity. And, not surprisingly, the A‑D converter stage impressed all who heard it, too — both with the internal preamp as a source and when fed from an external line signal. The meter is easy to read and well scaled, and the output formatting caters for all scenarios. I couldn't test the high-voltage mic inputs because I don't have any suitable mics, but the fact that the option is available is yet another feather in Grace Design's cap.

While the M201 is far from a budget mic preamp — especially if fitted with the A‑D option — the sense of quality when using it, as well as the sublime sound it creates, certainly reflects the investment. If I needed a bullet‑proof two-channel preamp that had to be capable of handling any two‑channel situation and providing the highest quality results, I would choose this without any hesitation — and over several more expensive alternatives too. It really is that impressive. .

Alternatives

In this part of the two‑channel mic preamp market there's quite a lot of choice, and all are good in their own ways. Amongst the valve‑based offerings is the Summit Audio TPA200B, the Universal Audio 2‑610, the Aphex 1100 MkII and, at a push, the Tube‑Tech MP1A. Solid‑state options include the API A2D, the Avalon AD2022, the Focusrite Red 8, GML's 8302, the Neve 1073DPD and the Great River MP‑2NV. To vary the options, you could also consider the Manley TNT, which has one valve channel and one solid state. These products all have their own sound characters and slightly different feature sets, and choice comes down to sonic preferences and requirements.

Grace Designs M201 £2050$2295
pros
Superb build quality.
Sublime, clean and neutral sound.
Huge headroom and spacious sound.
Optimised ribbon‑mic mode.
High‑quality DI inputs.
Built‑in M/S matrix.
Optional A‑D module.
Optional high‑voltage DPA capability.
cons
You'll have to cancel those luxury overseas holidays next year...
summary
A stunning two-channel microphone preamp with built‑in M/S matrix facility, DI and optimised ribbon mic inputs. Useful optional extras are available, the sound quality is impeccable, and the impressive build quality should guarantee a long life.
information
M201 £2050; A‑D option £890; 130V option £265; 190V option £355. Prices include VAT.
Aspen Media +44 (0)1296 681313.
M201 $2295; A‑D option $995; 130V option $295 (upgrade $375); 190V option $395 (upgrade $475).
Grace Design +1 303 443 7454.

SOS Readers Ads
GRAB A BARGAIN

£372,772

of Second-User Gear for sale now — don't miss out!

Neve 1073LB & 1073LB EQ

500-series Microphone Preamplifier & Equaliser

Thumbnail for article: Neve 1073LB & 1073LB EQ

Neve’s venerable 1073 preamp and equaliser are both now available in API’s popular ‘Lunchbox’ format. Were they worth waiting for?

Cloud Microphones Cloudlifters

In-line Microphone Preamplifiers

Thumbnail for article: Cloud Microphones Cloudlifters

Do these in-line mic preamplifiers mean you can use a passive ribbon mic with any preamp?

Slate Pro Audio Fox | Media

Dual-channel Microphone Preamplifier

Thumbnail for article: Slate Pro Audio Fox | Media

Test plots to accompany the article.

Cloud Microphones Cloudlifter

Audio Examples

Audio files to accompany the article.

Slate Pro Audio Fox

Dual-channel Microphone Preamplifier

Thumbnail for article: Slate Pro Audio Fox

With two channels and four ‘flavours’ on offer, Slate’s mic preamp promises plenty of flexibility. Does it also deliver on quality?

Neve 4081

Four-channel Microphone Preamplifier

Thumbnail for article: Neve 4081

Neve believe that there’s scope to bring classic designs up to date — and that’s exactly what they’ve done here, taking their revered 1081 mic preamplifier as the starting point.

Radial Tonebone PZ Pre

Acoustic Instrument Preamp

Thumbnail for article: Radial Tonebone PZ Pre

James Dunkley is on the case of the Radial Tonebone PZ Preamp.

Drawmer HQ

Preamplifier & D‑A Converter

Thumbnail for article: Drawmer HQ

Can a preamp and D‑A converter successfully straddle the pro-audio and hi‑fi markets? Drawmer believe it can...

Studio Projects VTB1

Microphone Preamplifier

Thumbnail for article: Studio Projects VTB1

This hybrid mic preamp can go from solid‑state clean to valve warmth — and for a surprisingly low price, too. Is there a catch?

Dave Hill Designs Europa 1

Microphone Preamp

Thumbnail for article: Dave Hill Designs Europa 1

This novel preamp design features a variable impedance and slew rate — which opens up a whole new world of possibilities from your mic locker...

MC AudioLab TP1tp

Valve Microphone Preamp

Thumbnail for article: MC AudioLab TP1tp

Can Sicilian manufacturers MC AudioLab bring a touch of Mediterranean magic to your recordings with their new boutique preamp?

Manley MicMAID

Mic & Preamp Switcher

Thumbnail for article: Manley MicMAID

The patchbay remains the cornerstone of most commercial studios, but using one to patch mics into different preamps can be risky — which is where the MicMAID comes in...

T-Rex SpinDoctor

Valve Preamplifier

Thumbnail for article: T-Rex SpinDoctor

Is a high-quality valve preamp in a programmable pedal just what the SpinDoctor ordered?

BAE 1073 MPF

Dual Solid-state Preamp

Thumbnail for article: BAE 1073 MPF

There are now several Neve 1073-inspired preamps available — but theyre not always 100 percent faithful to the original design. How close does this new contender from BAE come?

Focusrite Octopre MkII & MkII Dynamic

Eight-channel Microphone Preamps

Thumbnail for article: Focusrite Octopre MkII &  MkII  Dynamic

With upgraded mic amps and A-D conversion in their MkII versions, do Focusrites latest eight-channel preamps still lead the way at this price point?

Empirical Labs EL9 Mike-E

Microphone Preamplifier & Compressor

Thumbnail for article: Empirical Labs EL9 Mike-E

Empirical Labs, purveyors of some of the most versatile compressors around, apply their dynamics expertise to a mic preamp.

Benchmark MPA1

Dual-channel Microphone Preamplifier

Thumbnail for article: Benchmark MPA1

Benchmark strive to make their products exactly that: something against which the competition should be judged. So how does their new preamp measure up?

AEA RPQ

Dual-channel Microphone Preamplifier

Thumbnail for article: AEA RPQ

AEA have tweaked the design of their TRP ribbon-mic preamp, already something of a favourite, to create a device thats much more versatile — and without compromising on quality.

A-Designs Pacifica

Two-channel Microphone Preamplifier

Thumbnail for article: A-Designs Pacifica

Striking a useful balance between the transparent and the characterful, this high-quality, US-made preamp design brings versatility to the studio and some colour to the rack...

PreSonus DigiMax D8

Eight-channel Mic Pre & A-D Converter

Thumbnail for article: PreSonus DigiMax D8

Presonus combine their respected analogue and digital technology in this affordable ADAT-equipped preamp.

SPL Rackpack

Modular Preamp & Processor System

Thumbnail for article: SPL Rackpack

Sound Performance Lab have developed an enviable reputation for their hardware products, and now you can buy more for less with their modular rack system.

Audient Mico

Dual Microphone Preamplifier

Thumbnail for article: Audient Mico

With two channels of mic preamp, a phase-alignment control, digital outputs and clean signal path, the Mico offers you an awful lot of Audient for the money.

Universal Audio Twin-finity 710

Hybrid Microphone Preamplifier

Thumbnail for article: Universal Audio Twin-finity 710

Which is best, tube or solid state? When it comes to investing in a preamp, thats a question you may no longer need to ask...

Golden Age Project Pre 73

Microphone Preamplifier

Thumbnail for article: Golden Age Project Pre 73

This highly affordable device is based on the circuitry used in Neves legendary 1073. So can you really get a classic vintage preamp sound on a budget?

Arsenal Audio R20 & R24

Microphone Preamplifier & EQ

Thumbnail for article: Arsenal Audio R20 & R24

This new brand by revered high-end equipment manufacturers API is much more affordable than their established lines. So there must be a catch, right?

Grace Design M201

Microphone Preamplifier

Thumbnail for article: Grace Design M201

Regular readers will know that our Technical Editor isn't prone to excessive use of hyperbole — so when he calls a product "awesome", "stunning" and "sublime", it's probably time to sit up and take notice...

Thermionic Culture Rooster

Valve Microphone Preamp & EQ

Thumbnail for article: Thermionic Culture Rooster

Is this latest addition to the Thermionic Culture flock something for the company to crow about?

Focusrite ISA One

Mic Preamp

Thumbnail for article: Focusrite ISA One

The ISA preamp range has graced professional recording facilities the world over — but this classy single-channel model is within reach of the home and project studio.

Synchronia Sound Skulptor

DIY Mic Preamp System

Thumbnail for article: Synchronia Sound Skulptor

The DIY approach to audio equipment needn't mean bargain basement, and if you apply this principle to high-end vintage gear it might just save you a small fortune — without compromising on quality.

Sebatron VMP 2000eVU

Valve Mic Preamp

Thumbnail for article: Sebatron VMP 2000eVU

Australian company Sebatron aim to start building their brand in the UK with this 'character' preamp.

WIN Great Prizes in SOS Competitions!

 

Home | Search | News | Current Issue | Tablet Mag | Articles | Forum | Blog | Subscribe | Shop | Readers Ads

Advertise | Information | Privacy Policy | Support | Login Help

 

Email: Contact SOS

Telephone: +44 (0)1954 789888

Fax: +44 (0)1954 789895

Registered Office: Media House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom.

Sound On Sound Ltd is registered in England and Wales.

Company number: 3015516 VAT number: GB 638 5307 26

         

All contents copyright © SOS Publications Group and/or its licensors, 1985-2014. All rights reserved.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.

Web site designed & maintained by PB Associates | SOS | Relative Media