Rhythmic Robot | Laboratory
Sample LibraryReviews : Sample / Sound / Song Library
ver the last two issues, we’ve looked at two collections of instruments from new manufacturer Rhythmic Robot. This month we’re going to explore RR’s Laboratory. For a bit more explanation of what’s behind these 24‑bit mono Kontakt instruments (which require the full version of Kontakt, rather than just the player), go to the first of our Rhythmic Robot reviews (www.soundonsound.com/sos/may12/articles/beat_room.htm
The Laboratory is where the Professor and his assistant Mongo construct new instruments out of whatever spare parts happen to be lying around. For example, they made a polyphonic synth from vintage Stylophones. Stylosynth has three oscillators and, although it doesn’t sport a mass of controls, its samples have a warm and pleasant tonality. The synth’s three oscillators are Vintage, Modern and Stacked. Modern is rather bright and slightly distorted, Stacked is a pile of old Stylophones in some warped version of unison, and the Vintage setting is mellow and generally the most pleasant. You are free to mix them all together in any combination and this layering generates some reasonably lush synth patches. Stylosynth has a resonant filter with velocity control, plus two envelopes and an LFO that modulates the filter. There’s a chorus that doesn’t quite replicate Stylophone vibrato, but I doubt this will be an issue for anyone — except maybe Rolf Harris.
Although Stylosynth is capable of blips and pads, it’s not in the same league as Tubes and Wires, or TW1. This is the most expensive of the collection (still less than £20) and is based on samples coaxed from venerable signal generators. TW1’s three oscillators are named after the devices that spawned their waveforms: the Advance H1, the Taylor, and the charmingly named Goodwill Function Generator. Images of each wave are shown on the rear-panel oscilloscope, and it’s these that give the TW1 its wayward but distinctive character. After the oscillators, the architecture is simple enough. There’s a dual-envelope structure with a resonant low‑ or high‑pass filter and extra buzz supplied by “rail voltage”. This simulates overheating the circuitry, Louis and Bebe Barron would have been proud! Turn to the rear panel for a basic chorus and phaser.
Last up are two similar synths, the Bad Bad Bass and Bad Bad Lead, also full of valve oscillator samples. The main differences between the two synths are the source waveforms — low and aggressive or high and snarly — and there’s a degree of overlap if you already have the TW1. Their primary oscillators are backed up by an additional, filthy, sine wave, and from then on there’s a filter section comparable to Stylosynth’s and optional poly or mono operation. In the shape of Drift, Drive, Distortion and Compression, you also get Rhythmic Robot’s familiar tools for gaining attention.
This little collection scores highly for its raw valve tones and for its simplicity, an attribute often overlooked when throwing everything but the kitchen sink into sample libraries. It’s true that, with patience, you could probably find a selection of signal generators in junk shops and at car boots, then painstakingly sample them to create your own unique instruments. Alternatively, these are priced so that you don’t have to! Paul Nagle£4.95 to £19.95 to download.£4.95 to £19.95 to download 0