Prodipe Pro 5 Ribbon & Pro 10S

Buy PDF

2.1 Monitoring System

Published in SOS March 2011
Printer-friendly version

Reviews : Monitors
 
These nearfield ribbon monitors deliver a less fatiguing sound than some — but does smoothness come at a cost?
Paul White
French company Prodipe surprise us on a regular basis with the quality and value of their products. Like many other companies now, they achieve this, at least in part, by designing in the West but building in China, where the build costs are lower. Their Pro 5 Ribbon monitor speaker is the smaller brother of the Pro 8 Ribbon that we reviewed last year, and it’s designed to be used either on its own as a small nearfield, or along with a subwoofer as a 2.1 monitoring system. Our review system included the company’s Pro 10S subwoofer, so I was able to try both configurations.
High Five
Although the Pro 5 Ribbons may appear fairly plain at first sight, they’re actually rather nicely finished, with slightly rounded corners and a black satin coating. These little active, two‑way monitors measure just 291 x 196 x 240 mm and weighs 7kg each. Like the aforementioned Pro 8 model, they feature a ribbon tweeter, and there’s a slotted bass reflex port at the bottom of the front baffle, along with a blue LED below the tweeter to indicate whether the speakers are powered up.
The ribbon driver measures one inch by two, and the five‑inch cone driver utilises a glass-aramid composite cone, which is suspended in a rubber surround. Both drivers are recessed, so that they’re flush with the baffle.
The overall amplifier power is rated at 75W, with a THD figure of 0.05 percent at the HF end and 0.02 percent for the bass/mid. The crossover frequency is set at 3kHz, and a 45Hz subsonic filter protects the speakers from excessive low‑frequency energy. Prodipe claim a frequency response of 50Hz to 30kHz, but I really wish people would specify whether these figures are between the ‑3dB points, which would be more meaningful!
Connections on the rear panel comprise a balanced XLR analogue audio input, a balanced TRS jack input, and an unbalanced RCA phono. Mains power comes in on the usual IEC connector (which is switchable for 110 or 230 Volts AC operation), and there’s a volume control, along with a separate level trim for the high frequencies that runs from ‑2dB to +1dB in 1dB steps.
Sub Way
The rear panel of the Pro 10s subwoofer, which includes both balanced and unbalanced analogue inputs.
The rear panel of the Pro 10s subwoofer, which includes both balanced and unbalanced analogue inputs.
The Pro 10s active subwoofer that completed the review set has a front‑ported, almost cube‑shaped cabinet (measuring 382 x 355 x 398 mm) and provides a peak power of 225W (150W RMS). Its 10‑inch driver is a long‑excursion design, again using an aramid composite cone, and the whole subwoofer weighs in at 17.7kg. Active filters, comprising a variable low‑pass filter (50Hz to 150Hz feeding the subwoofer amp) plus a fixed 80Hz high‑pass, set the crossover between the subwoofer and the monitors. The subwoofer covers the frequency range 36‑150Hz ±1.5dB (which I translate as being equivalent to within 3dB), and there’s also a ‘phase’ (ie. polarity‑invert) switch, which you’d normally set in whatever position gives the loudest perceived bass.
The audio input and mains power options are the same as they are for the Pro 5 Ribbon. The 80Hz high‑pass-filtered outputs that feed the main speakers are presented both on balanced XLRs and on unbalanced phonos, but not on jacks. The subwoofer’s contribution to the volume is adjustable, and there are switchable filters to adjust the gain at 2kHz from +1dB to ‑2dB in 1dB steps. These affect the output feeds to the main speakers. Unusually, no maximum SPL level is quoted, so there’s no indication of how loud the speakers can go: that’s one judgement that has to be made by ear!
Testing
On their own, the Pro 5 Ribbon speakers have a very smooth sound. I found that they carry voices particularly well, and also put out more low end than you might expect from their size. However, I found the overall sound a little ‘soft’, which made it difficult to focus in on high‑frequency detail — and I felt they sounded best with the HF level turned up to its +2dB setting. The low end also tended to be a little boxy and unfocused, which is something the Pro 5 Ribbons have in common with many smaller ported monitors.
Of course, these comments have to be viewed in the context of the relatively low price and small physical size of the Pro 5 Ribbons, and they’re certainly a lot more useful as monitors than most desktop multimedia speakers of this size.
Having said all this, I have to say that their tonal balance seemed to be pretty good — so as long as you also check your mixes for problems using headphones, they’d be fine for small studio applications at low‑to‑moderate listening levels. As I cranked them up, they got a touch boxy — which, again, was not unexpected — but for general music use when sitting up close to them, they’re loud enough.
Adding the subwoofer with all the speaker volumes set to their 0dB level and the sub’s filter adjusted to 80Hz, the low‑end contribution is vastly too high. In fact, I found I got the best result when turning up the subwoofer to a level where you only just realise it’s doing anything, and that seems to be very close to its lowest setting (probably between ‑12 and ‑20dB!).
Once correctly adjusted, though, the low end sounds suitably deep and even, though still not particularly tight, which is possibly due to the porting being designed to prop up the bass end in such a small cabinet. In fact, the porting on the Pro 5 Ribbons may well contribute to their low‑end cloudiness, so when used with a subwoofer, stuffing some acoustic foam or a pair of socks into the ports could well improve matters.
Verdict
Given their low cost, these speakers perform reasonably well and, importantly, are non‑fatiguing to listen to, albeit with a lack of focus when compared with more up‑market monitors. Once you add the subwoofer, the low-end extension is all you could want for use in domestic‑sized studios — but then that pushes the cost to a level where investing in a pair of larger full‑range speakers might be a better option. Used on their own, the Pro 5 Ribbons certainly outperform most desktop multimedia speakers, and they’re well‑suited to those who have little space for their studio gear.    0

Alternatives
If you’re after speakers with ribbon tweeters, the only low-cost alternatives I can think of are the cosmetically similar Samson Rubicons (5s and 8s). If you have a higher budget at your disposal, the Adam A5s would also be worth auditioning.


Published in SOS March 2011

 

Home | Search | News | Current Issue | Digital Editions | Articles | Forum | Subscribe | Shop | Readers Ads

Advertise | Information | Links | Privacy Policy | Support

In this article:
High Five
Sub Way
Testing
Verdict
Alternatives
Prodipe Pro 5 Ribbon & Pro 10S £369$225/£325$248
pros
Smooth, non‑fatiguing sound.
Affordable.
Optional subwoofer increases the LF extension and improves the performance of the Pro 5s.
cons
Somewhat ‘soft’ sound, lacking in tightness at the low end.
summary
Prodipe are generally very good at balancing cost against quality, and though I may seem a bit lukewarm about these speakers, don’t let that put you off trying them if space and cash are tight.
information
Pro 10S £324.99 (each); Pro 5 £369 (per pair). Prices include VAT.
Zen Audio +44 (0)1924 476533.
Click here to email
www.zenaudiolimited.co.uk
www.prodipe.com/en
Pro 10S $247.99 (each); Pro 5 $225 (per pair).
Music Factory Direct +1 888 368 7770.
Click here to email
www.musicfactorydirect.com
www.prodipe.com/en
Monitors Demystified
Monitoring Tips
Monitors vs Hi-Fi?
SOS Readers Ads
GRAB A BARGAIN
£609,608
of Second-User Gear for sale now — don't miss out!

AVI Neutron Five

2.1 Monitor System

Thumbnail for article: AVI Neutron Five

This interesting monitor system uses the natural roll-off of the satellite speakers to provide the crossover with the subwoofer.

Tannoy Reveal 601A

Studio Nearfield Reference Monitors

Thumbnail for article: Tannoy Reveal 601A

Building to a price inevitably entails compromises. The art is in choosing the right ones...

Quested V3110

Three-way Active Monitors

Thumbnail for article: Quested V3110

Sometimes, a dose of old-fashioned good engineering delivers something well worth listening to...

Adam A7X

Active Two-way Studio Monitors

Thumbnail for article: Adam A7X

Their A7 nearfield monitors received many plaudits, not least in the pages of SOS, but manufacturer Adam thought there was room for improvement.

PMC TB2S AII

Active Nearfield Monitors

Thumbnail for article: PMC TB2S AII

PMC broke new ground a decade ago with their TB2 monitors, but the competition have been catching up. Does PMC’s new ‘activated’ design nudge them back to the front of the pack?

Avantone Active MixCube

Secondary Reference Monitors

Thumbnail for article: Avantone Active MixCube

Avantone have added on-board amplification to their contemporary take on the classic ‘Horrortone’ secondary monitor, and the result is something quite special...

Sonodyne SM 50AK

Two-way Nearfield Active Monitors

Thumbnail for article: Sonodyne SM 50AK

India may be a growing force in most industries these days, but few Indian pro-audio companies have made it into Western markets. Can Sonodyne’s speakers change all that?

Unity Audio The Rock

Monitor Speakers

Thumbnail for article: Unity Audio The Rock

The time-domain response of monitors is often sacrificed for level, but this sealed-cabinet design tackles that issue head-on...

Infrasonic Blow 4D

Nearfield Monitor Speakers

Thumbnail for article: Infrasonic Blow 4D

With digital and analogue inputs, these small speakers from newcomers Infrasonic promise a lot for the money. Can they outperform their budget price tag?

Blue Sky Sat 8 & Sub 212

2.1 Monitoring System

Thumbnail for article: Blue Sky Sat 8 & Sub 212

If you demand brutal and revealing precision from your monitors, read on...

Barefoot Sound MicroMain 27

Active Three-way Monitors

Thumbnail for article: Barefoot Sound MicroMain 27

As well as a distinctive design, these huge nearfield monitors offer a frequency and time-domain performance that compares with the best.

Adam S3XV

Studio Reference Monitors

Adam make the leap to a three-way speaker design that seems to pay dividends in clarity and separation.

JBL LSR 2300

Monitor Speakers

Thumbnail for article: JBL LSR 2300

JBL have a reputation for clinically precise monitors, but this time they’ve come up with something a little smoother...

Equator Audio Q8

Active Monitors

Thumbnail for article: Equator Audio Q8

Coaxially-mounted speakers may seem a bit old-school, but there’s nothing wrong with the theory — and a touch of DSP can make them very modern indeed!

M-Audio Studiophile DSM1

DSP Reference Monitors

Thumbnail for article: M-Audio Studiophile DSM1

Built-in DSP extends the flexibility and usefulness of these capable speakers.

Event Opal

Studio Monitors

Thumbnail for article: Event Opal

Event’s new owners make some extravagant claims for these new high-end monitors, whose design is said to put quality first. Do they live up to the hype?

Samson Resolv A6 & 120A

Studio Monitors & Subwoofer

Thumbnail for article: Samson Resolv A6 & 120A

Samson’s new low-cost nearfields can produce a big sound, but do they measure up for serious mixing? We find out.

Prodipe Pro Ribbon 8

Active Monitors

Thumbnail for article: Prodipe Pro Ribbon 8

Ribbon tweeters can yield a smooth sound, while still capably reproducing transient detail — and the Pro Ribbon range promises to do so for an attractive price.

Focal CMS65

Active Nearfield Monitors

Thumbnail for article: Focal CMS65

Focal control everything from design to manufacture in their factory in France — and this approach appears to be paying off.

Klein+Hummel O410

Active Midfield Monitors

Thumbnail for article: Klein+Hummel O410

Getting the balance right between the benefits and disadvantages of ported and non-ported speaker designs is a tricky job, and K+H do it better than most with this ported model.

GLOSSARY: technical terms explained
WIN Great Prizes in SOS Competitions!
 

Email: Contact SOS

Telephone: +44 (0)1954 789888

Fax: +44 (0)1954 789895

Registered Office: Media House, Trafalgar Way, Bar Hill, Cambridge, CB23 8SQ, United Kingdom.

Sound On Sound Ltd is registered in England and Wales.

Company number: 3015516 VAT number: GB 638 5307 26

         

All contents copyright © SOS Publications Group and/or its licensors, 1985-2012. All rights reserved.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.

Web site designed & maintained by PB Associates | SOS | Relative Media