The perfect mic would translate any sound without adding to or detracting from it in any way, yet the modern engineer is faced with a multitude of different models designed for different applications or to give different tonal 'enhancements'. This is due, at least in part, to the technical impossibility of making a microphone that performs optimally for all parameters that are of concern to the end user; a mic designed to withstand huge sound levels, for example, might tend to be noisy on low-level signals, and a mic designed for a pristine on-axis response might fall short when faced with off-axis sounds.
Then there's fashion: do you actually want a mic that sounds accurate, or do you want one that flatters -- rose-tinted spectacles for the ears? And what about pickup pattern? Omnis invariably produce the most natural sound, but they may pick up sounds we'd rather not hear. Cardioids, on the other hand, provide better rejection of off-axis sounds, but often at the expense of tonal neutrality. Multi-pattern mics are available, but they cost rather more than fixed-pattern models, and choosing one makes little sense if it's going to be left set to 'cardioid' day in, day out.
With the CM700, Crown haven't been rash enough to try to build a mic that promises all things to all people. Instead, they seem to have tried to deliver most things to most people, all at an affordable price. Most live performers use cardioid mics because of the need to reject spill, and in the studio, cardioids are popular for the same reason. That narrows it down a bit -- let's build a cardioid. In order to get high-frequency accuracy, you need a capacitor capsule because of the low moving mass of the diaphragm when compared to a moving-coil mic, but you can get the same performance from a well-designed back-electret capsule, often at a lower cost, and with the added bonus that you can use lower phantom power voltages when the full 48 volts is unavailable. So it's no surprise that the CM700 is a back-electret and can run from any phantom power voltage in the 12-48V range. However, Crown have resisted the temptation to provide battery power as an alternative, because this rather compromises the amount of available headroom.
In order to maintain a reasonably accurate off-axis response (the level should drop, but the frequency response should stay as nearly the same as possible), Crown have used a fairly small-diameter diaphragm. Indeed, the whole microphone is surprisingly small -- so small that when you plug an XLR into the end of it, the mic almost doubles in size. In fact, the black powder-coated finish and the general proportions of the mic make it look like a small Maglite torch.
Recessed into the side of the mic is a switch for providing a bass roll-off characteristic, and there are also two alternative filter positions: a steep slope and a more gentle roll-off. Without the filter switched in, the mic has a useful response from 30Hz to 20kHz, enabling it to capture the entire audible spectrum.
People like the idea of honest microphones, but in listening tests, they still tend to pick the ones that sound the most pleasing rather than the ones that sound the most accurate. What's more, in live situations, mics tend to need a little help in the 3-5kHz presence region to aid projection. Pragmatically, Crown have introduced a gentle presence rise, which is just enough to add that all-important 'air' to the top, and to improve diction in difficult environments. To put this in perspective, some mics provide between 5 and 10dB of boost at around 3kHz; the CM700 has only around 2.5dB of lift above 4kHz.
For live vocals where capacitor mics are used, popping is always a problem, but you can't really go on stage with a pair of tights stretched over a coat-hanger. To try to get around this, Crown have included a push-on foam windshield which has the unusual feature of a secondary foam disc suspended a few millimetres above the main section of the foam by means of a plastic moulding. I would expect this to compromise the off-axis response slightly, so it's probably best to use it only when working with close vocals.
Turning to specifications for a moment, the mic has an equivalent self noise of 21dB SPL (A-Weighted), which is not untypical for this type of microphone. Working with a sound level of 94dB, this would provide a signal-to-noise ratio of 73dB SPL. The maximum SPL (Sound Pressure Level) is 151dB for 3% distortion (using 48V phantom power). This is incredibly loud; no wonder, then, that the manufacturers also recommend the CM700 for drums and percussion, as well as vocals, pipe organ and classical music.
On the sensitivity front, the quoted figure is 2.5mV/Pa, which is adequate for most purposes, though actually quite low when compared to some other capacitor mics. This brings me back to my point that mic design is a compromise: Crown have obviously designed with close to middle-distance miking, where high sound levels are a distinct possibility, in mind. As supplied, the mic comes in a tough, zip-up carry case with a stand adaptor clip and the aforementioned windshield.
Most mics I review surprise me in at least one way. The first thing that surprised me about the CM700 is that it doesn't sound small at all. I compared it side by side with some other high-quality back-electret stick mics and found that, although the CM700 was noticeably less sensitive than most of its competitors, it delivered a smooth, full sound with an open, natural top end, while some of the other contenders sounded slightly thin or scratchy by comparison. This was particularly evident on the acoustic guitar tests.
Low sensitivity can sometimes be a problem, but tested with a small Mackie mixer and an acoustic guitar around 12 inches away from the mic as the subject, the CM700 provided adequate level with no obvious background noise. To some extent, I think the CM700 may sound full-bodied in comparison to other mics of the same type because many other manufacturers introduce a deliberate, and quite severe, low-frequency roll-off to counteract the bass rise caused by the proximity effect (of cardioid mics), when the mic is used very close up. By fitting two different roll-off filter settings, and perhaps by keeping the sensitivity down to prevent breath noises from overloading the electronics, Crown have been able to extend the useful low-end response rather further.
The pop shield arrangement makes an obvious difference on vocals, and is quite effective when used in conjunction with one of the bass roll-off settings. However, for studio use, an external pop shield is still recommended.
This is a surprisingly nice-sounding and versatile little microphone that will deliver first-class results in most high-SPL or close-up miking situations. On the other hand, its low sensitivity really makes it unsuitable for jobs like distance miking of choirs or classical ensembles. Close-miking of classical instruments is no problem, and pipe organs at a distance should be well represented, but for cockroaches mating at 50 yards, you need to choose a mic with a different set of compromises.
As to subjective sound, the CM700 gives the impression of honesty, delivering a smooth, articulate sound with just the right sense of openness at the high end. Vocals sound clear without being thin, and if I hadn't seen the mic first, I wouldn't have been able to guess at its size from listening to the results it produces. Crown are a very reputable microphone company and this little mic will do nothing to damage their reputation. In short, if you don't need to impress clients with a 'grenade on a stick' mic, the CM700 will meet the majority of recording needs.
pros
Has a natural sound that is clear without being thin or edgy.
Useful on a wide range of sound sources.
Withstands ludicrously high SPLs, making it useful for percussion of all kinds.
Small enough to get into awkward places.
cons
Relatively low sensitivity (for a capacitor mic), which means that the CM700 is unsuitable for distance miking unless the sound source is relatively loud.
summary
A compact mic that works well in virtually all situations where a cardioid mic is needed, either at close quarters or in a high-SPL environment.
£ £311.38 inc VAT.
A Fuzion plc, 2 Lyon Road, Walton-on-Thames, Surrey KT12 3PU.
T 01932 882222.
F 01932 882244.
Multi-pattern Condenser Microphone
Audio-Technica have added multiple polar patterns to one of their already successful designs, bringing increased versatility in the studio.
Audio Examples
Stereo Condenser Microphone

Theres more to this variation on Audio-Technicas flagship microphone than the simple addition of a second capsule...
Condenser Microphone
Paul White explores the capabilities of the understated-yet-powerful Studio Pro M2.
Microphone Preamp

Schoeps make some of the most revered mics on the planet, so when they release a commercial version of the mic preamp they use for testing, you have to take it seriously...
Test Measurements
The following charts, made using an Audio Precision Analyser, accompany our review of the Schoeps VSR5 microphone preamplifier.
Handheld Condenser Microphone
Designed as a hand-held live vocal mic, this mic has a cardioid pickup pattern, and seems very robustly engineered.
Mono Valve Equaliser

British 'boutique' outboard manufacturers seem to be rather thin on the ground these days, but if this Pultec clone is anything to go by, newcomers Cartec look set to make a big impression.
Dynamic Microphone
Prodipe say they wanted to offer a high-quality, live-sound, cardioid-pattern dynamic mic at a very affordable price.
Multi-pattern Condenser Microphone

Sontronics mics usually sound as distinctive as they look - and this one looks more distinctive than most!
Multi-pattern Valve Microphone

Hot on the heels of the impressive Genesis cardioid valve mic, MXL have unveiled their flagship multi-pattern model, the Revelation. Does it live up to its name?
MXL Revelation | Audio Examples
Multi-pattern Valve Microphone
These audio files accompany the SOS September 2010 review of the MXL Revelation microphone.
USB Microphone
Valve Microphone

Does AKGs Chinese-made Perception 820 maintain the Austrian companys impressive reputation?
Audio Examples
Hear for yourself how this mic performed during the SOS tests.
Audio-Technica AT4080 & AT4081
Ribbon Microphones
A-Ts brand-new transducer technology has produced a robust design intended to deliver high signal levels as well as that prized ribbon character...
Snare & Tom Condenser Microphones
Despite the ubiquity of the SM57 for use on snare, there are other options — and Earthworks aim to help you capture a more natural sound.
Cardioid Valve Microphone

We put MXLs Genesis through its paces alongside a much pricier model, to find out just how good a tube mic can be at this price.
Hear For Yourself
To accompany our July 2010 Genesis review, we recorded a series of standard tests with the review mic alongside a more established mic (in this case, the AKG C12 VR).