Hi,
I have connected the MIDI out of MFC 10 to Yamaha to Yamaha workstation keyboard: PSR-A3000 (newer model) which is connected to iMac via USB. I have programmed MFC 10, foot control to send cc 11 ( expression).
However, When I move on the foot control it doesn't send any midi messages. I am monitoring it using a MIDI monitor app on iMac.
Since MFC is not USB, I have added it into Mac's MIDI studio as general midi but its Icon doesn't lid up when I press on MFC footswitches and control.
The MIDI Preset on PSR is All Parts. I have learned that Yamaha PSR by default have midi thru on. According to the manual of MFC 10:
Status Second Third
BnH 0BH vvH
I have set:
n = 0 ( channel 1)
vv = 127 on MFC10.
Am I doing anything wrong?
I noticed that one cannot send expression via joystick ( live control) and foot or Keyboard panel as there is no option in the function list ( Articulation 1, ... OST-).
My goal is to send cc 11 to Kontakt 5 from a controller.
So this is not possible and should I use another approach?
PS. I can do it with Touch OSC.
You are here
Yamaha MFC10 Foot Control Not Sending MIDI
Moderator: Moderators
4 posts
• Page 1 of 1
- csarami@ncsu.edu
- Regular
- Posts: 64
- Joined: Thu May 25, 2017 1:44 pm
Re: Yamaha MFC10 Foot Control Not Sending MIDI
Simple things first. Try swapping out the MIDI cable.
-
The Elf - Jedi Poster
- Posts: 16262
- Joined: Tue Aug 14, 2001 12:00 am
- Location: Sheffield, UK
An Eagle for an Emperor, A Kestrel for a Knave.
Re: Yamaha MFC10 Foot Control Not Sending MIDI
It worked! The cable was supposed to brand new.
Thank you!
Thank you!
- csarami@ncsu.edu
- Regular
- Posts: 64
- Joined: Thu May 25, 2017 1:44 pm
-
The Elf - Jedi Poster
- Posts: 16262
- Joined: Tue Aug 14, 2001 12:00 am
- Location: Sheffield, UK
An Eagle for an Emperor, A Kestrel for a Knave.