Search

The rate of the 'beat' of a piece of music measured in beats per minute.

Total Harmonic Distortion. A measure of the linearity of a device. The THD+N measurement includes the noise contribution as well and is an indication of the quality of an audio product.

The tonal 'colour' of a sound.

The term dates back to multitrack tape where the tracks are physical stripes of recorded material, located side by side along the length of the tape.

An electrical device in which two or more separate and electrically isolated coils of wire are wound around a common ferromagnetic core. Alternating Current passing through one coil creates a varying magnetic field which induces a corresponding current in the other coil(s). In audio applications transformers are often used to convey a signal without a direct electrical connection, thus providing 'galvanic isolation' between the source and destination. Winding a transformer with different numbers of turns for each coil allows the output voltage to be increased or decreased in direct proportion – a feature widely employed in mains power-supply transformers to reduce the mains voltage to something more appropriate for the circuitry, for example, or in microphone preamp step-up transformers.

This word has several meanings in recording. It may refer to the relative levels of the left and right channels of a stereo recording (eg. Balance Control), or it may be used to describe the relative levels of the various instruments and voices within a mix (ie. Mix balance).

A counting system based on only two states: 1s and 0s. It is ideal for electronic equipment where it can be represented as high and low voltages, light on/off, N-S or S-N magnetic domains, etc.

(Also sometimes referred to as a buss) An electrical signal path along which multiple signals may travel. A typical audio mixer contains several (mix) buses which carry the stereo mix, subgroups, the PFL signal, the aux sends, and so on. Power supplies are also fed along buses.

(Also known as a Carbon Button Microphone). An obsolete form of microphone in which carbon granules are contained between two metal contact plates, one of which acts as the diaphragm and moves in response to sound waves. The microphone has to be biased with a DC voltage which causes a current to pass from one metal contact plate, through the carbon granules, to the other metal contact plate. The varying pressure exerted on the carbon granules by the moving diaphgram causes a varying resistance and thus a varying current which is analogous to the sound waves. Carbon Button Microphones were used in the very early days of sound recording and broadcasting, as well as in domestic telephones up until the 1980s when electret capsules became more commonplace.